
1 / 2 · Click to enlarge
At a glance
Made by Seeed Studio, this vibration/tilt sensor and modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Tilt Sensor Module; operating voltage (vdc) 3.3 to 5; life cycle 100000. Check that your power source supplies 3.3 to 5 before connecting it.
Key Highlights
- Model No. / Name: Tilt Sensor Module
- Operating Voltage (VDC): 3.3 to 5
- Life Cycle: 100000
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Tilt Sensor Module |
|---|---|
| Operating Voltage (VDC) | 3.3 to 5 |
| Life Cycle | 100000 |
| Length (mm) | 130 |
| Width (mm) | 90 |
| Mounting Hole Diameter (mm) | 2 |
| Weight (g) | 1 (approx) |
| Additional Specs. | Connecting Angle: 10? ~ 170?, Disconnect Angle: 190? ~ 350? |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6.8 × 4.5 × 1 cm |
Overview
The Seeed Studio Grove Tilt Switch, made by Seeed Studio, is listed in our vibration/tilt sensor and modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Tilt Sensor Module
- Operating Voltage (VDC): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
- Life Cycle: 100000
- Length (mm): 130 (measure your mounting space before ordering)
- Width (mm): 90 (measure your mounting space before ordering)
- Mounting Hole Diameter (mm): 2
- Weight (g): 1 (approx) (important for drones, RC models and anything you carry)
- Additional Specs.: Connecting Angle: 10? ~ 170?, Disconnect Angle: 190? ~ 350?
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Do you need a special button having a tilting feature? So we are presenting Grove – Tilt Switch v1.1, which you can tilt and operate easily. It is an equivalent of a button and is ready to use with a micro-controller as a digital input.
Inside the tilt switch, there is a pair of balls that make contact with the pins when the case is upright. When the switch is level, it is open. When you tilt it, the switch closes. The SIG pin output is LOW normally. When the tilt switch is upright, a pair of balls inside the tilt switch will contact with the pins and the SIG pin output becomes HIGH. There is a surface mount resistor used in this Grove – Tilt Switch. You can tilt the case over and the balls don’t touch, thus they don’t make a connection. It is wired to the SIG line. No Connection (NC) line is not used on this Grove module.
For all Grove users (especially beginners), Seeed Studio provides guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before using the product. This is a suitable product for not only Grove users but also all electronics enthusiasts. So, why wait? Buy now!
Features:
- Grove compatible interface
- Easy to use
- Simplicity
- Long-lasting life
Useful links:
TutorialPackage Includes:
1 x Seeed Studio Grove Tilt SwitchQuick specs
- Model No. / Name
- Tilt Sensor Module
- Operating Voltage (VDC)
- 3.3 to 5
- Life Cycle
- 100000
- Length (mm)
- 130
- Width (mm)
- 90
- Mounting Hole Diameter (mm)
- 2





















