Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact carrier board for Raspberry Pi CM4 that exposes USB 2.0, dual MIPI CSI, UART, I2C, SPI and analog video in a 55x40mm footprint. It is ideal for embedded and IoT projects where space is limited but connectivity matters.

Key Highlights

  • Compact 55mm x 40mm footprint matches Raspberry Pi CM4 dimensions
  • Dual MIPI CSI camera ports: one 2-lane and one 4-lane
  • USB 2.0 highspeed port plus multiple UART, I2C and SPI interfaces
  • Supports H.265 4Kp60 decode and OpenGL ES 3.0 graphics
  • Bluetooth 5.1 dual mode support for wireless connectivity
  • Analog video output for legacy display compatibility

Ideal For

  • Embedded system developers building compact CM4-based devices
  • IoT project creators needing a small carrier board
  • Computer vision enthusiasts using dual cameras
  • Robotics and drone builders requiring lightweight electronics
  • Industrial automation engineers prototyping space-limited solutions

Buying Tip

Remember that the Raspberry Pi CM4 module is not included, so you will need to purchase it separately to use this carrier board.

Elecvora expert review

Our verdict

The Seeed Studio Ochin Tiny Carrier Board V2 is a well-designed, ultra-compact carrier for the Raspberry Pi CM4 that breaks out essential interfaces without wasting space. It is an excellent choice for embedded and portable projects where a full-size carrier board would be too bulky.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very compact size matches CM4 footprint
  • Dual MIPI CSI camera ports enable stereo vision
  • Broad interface selection including multiple UARTs
  • Supports high-resolution video decode
  • Lightweight and easy to integrate

Cons

  • CM4 module not included
  • Limited USB ports (only one USB 2.0)
  • No on-board wireless; relies on CM4 module

Best for

Space-constrained embedded and IoT projects

Not ideal for

Users needing multiple USB ports or built-in wireless

Specifications

Processor TypeBroadcom BCM2711
ResolutionH.265 (HEVC) (up to 4Kp60 decode), H.264 (up to 1080p60 decode, 1080p30 encode), OpenGL ES 3.0 graphics
Interface1×USB 2.0 port (highspeed), MIPI CSI-2: o 1×2-lane MIPI CSI camera port, 1×4-lane MIPI CSI camera port, 1×USART, 3×UART, 1×I2C port, 1×SPI port, Analog Video Output
Length (mm)55
Width (mm)40
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.05 kg
Shipping Dimensions10 × 6 × 3 cm

What's in the box

  • 1 x Seeed Studio Ochin Tiny Carrier Board V2 for Raspberry Pi CM4

Frequently Asked Questions

Does this carrier board include the Raspberry Pi CM4 module?
No, the CM4 module is not included. You must purchase it separately.
What cameras are supported?
The board has one 2-lane and one 4-lane MIPI CSI-2 camera port, supporting compatible Raspberry Pi cameras.
How is the board powered?
Power is supplied through the CM4 module's power input. Refer to the CM4 documentation for voltage and current requirements.
Does it support Bluetooth?
Yes, Bluetooth 5.1 dual mode is supported if your CM4 module has wireless capability.
What is the maximum video resolution?
It supports H.265 decode up to 4Kp60 and H.264 decode up to 1080p60, with encode up to 1080p30.
What are the dimensions?
The board measures 55mm by 40mm, matching the CM4 footprint.

Overview

The Seeed Studio Ochin Tiny Carrier Board V2 is a purpose-built expansion board for the Raspberry Pi Compute Module 4 (CM4). It provides a minimal yet highly functional interface breakout in an ultra-compact form factor, measuring only 55mm by 40mm, which is the same size as the CM4 module itself. This makes it an excellent choice for embedded systems, portable devices and space-constrained industrial applications where a full-size carrier board would be impractical.

Despite its small size, the Ochin Tiny Carrier Board V2 exposes a useful set of connectivity options, including a USB 2.0 highspeed port, dual MIPI CSI camera ports (one 2-lane and one 4-lane), multiple UARTs, I2C, SPI and analog video output. It is designed for developers and engineers who need a reliable, compact carrier solution for CM4-based projects.

Key Features

  • High-performance processing: Supports the Broadcom BCM2711 quad-core Cortex-A72 64-bit SoC at 1.5GHz (via the CM4 module).
  • Rich video capabilities: H.265 (HEVC) up to 4Kp60 decode, H.264 up to 1080p60 decode and 1080p30 encode, plus OpenGL ES 3.0 graphics.
  • Flexible camera connectivity: Two MIPI CSI-2 camera ports (1x 2-lane and 1x 4-lane) for stereo vision or multi-camera setups.
  • Essential interfaces: 1x USB 2.0 highspeed, 1x USART, 3x UART, 1x I2C, 1x SPI and analog video output.
  • Wireless support: Bluetooth 5.1 dual mode function (requires CM4 module with wireless capability).
  • Compact design: Same footprint as the CM4 module, ideal for tight spaces.

Specifications Explained

The processor type listed is the Broadcom BCM2711, which is the SoC used on the Raspberry Pi Compute Module 4. This quad-core Cortex-A72 CPU runs at 1.5GHz and provides a good balance of performance and power efficiency for embedded workloads.

The video capabilities include H.265 (HEVC) decoding up to 4Kp60, H.264 decoding up to 1080p60 and encoding up to 1080p30, along with OpenGL ES 3.0 graphics. This means the board can handle high-resolution video playback and moderate encoding tasks, suitable for media streaming and computer vision applications.

For connectivity, the board offers one USB 2.0 highspeed port, which is adequate for peripherals like keyboards, mice, or storage. The dual MIPI CSI-2 camera ports allow you to connect one 2-lane and one 4-lane camera, enabling stereo vision or dual-camera setups. The serial interfaces (1x USART, 3x UART) are useful for communicating with sensors, GPS modules, or other microcontrollers. The I2C and SPI ports support a wide range of sensors and displays. Analog video output provides compatibility with older displays or video transmitters.

Bluetooth 5.1 dual mode is supported, but note that this requires a CM4 module with wireless connectivity. The board itself does not include a radio; it simply passes through the CM4's capabilities.

Compatibility and Requirements

The Ochin Tiny Carrier Board V2 is compatible with the Raspberry Pi Compute Module 4 (CM4). It does not include the CM4 module, which must be purchased separately. The board requires a power source, typically via the CM4's power input, but specific power requirements are not detailed in the provided data. You will also need appropriate cables and peripherals for your project. The board supports CM4 modules with eMMC flash, offering faster transfer rates up to 100 MB/s, which is four times faster than CM3+.

Typical Uses

This carrier board is well-suited for a variety of applications, including audio/video manipulation and streaming, neural networks, machine learning, computer vision, robotics, drones, home automation and IoT projects. Its small size makes it particularly attractive for portable and embedded systems where space is at a premium.

What's in the Box

Package includes: 1 x Seeed Studio Ochin Tiny Carrier Board V2 for Raspberry Pi CM4. Note: The Raspberry Pi CM4 module is not included.

Quick specs

Processor Type
Broadcom BCM2711
Resolution
H.265 (HEVC) (up to 4Kp60 decode), H.264 (up to 1080p60 decode, 1080p30 encode), OpenGL ES 3.0 graphics
Interface
1×USB 2.0 port (highspeed), MIPI CSI-2: o 1×2-lane MIPI CSI camera port, 1×4-lane MIPI CSI camera port, 1×USART, 3×UART, 1×I2C port, 1×SPI port, Analog Video Output
Length (mm)
55
Width (mm)
40
Bluetooth Version
Supports Bluetooth 5.1 dual mode function
See all specifications