
1 / 5 · Click to enlarge
At a glance
Made by Seeed Studio, this seeed studio sbc is a good fit for everyday home and hobby use. Main specs: shipping weight 0.150 kg.
Key Highlights
- Small and easy to carry or mount
- Shipping Weight: 0.150 kg
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.150 kg |
|---|---|
| Shipping Dimensions | 13 × 13 × 5 cm |
Overview
The Seeed Studio reComputer Mini J501 Carrier Board for Jetson AGX Orin with GMSL Extension, made by Seeed Studio, is listed in our seeed studio sbc range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.150 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 13 × 13 × 5 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Seeed Studio reComputer Mini J501 Carrier Board is a compact, high-performance carrier board designed for the Jetson AGX Orin module. With a 110mm × 110mm footprint, it delivers powerful embodied AI capabilities up to 275 TOPS, making it ideal for robotics and edge AI systems. It supports up to 8 GMSL2 cameras for advanced vision AI and includes rich I/O such as 10GbE, USB, CAN, and RS-485. Its wide 19–48V DC input range suits mobile and battery-powered robotics. Built for autonomous systems, it enables real-time processing, sensor fusion, and AI-driven decision-making in compact deployments.




Features:
- Compatible with Jetson AGX Orin module (up to 275 TOPS)
- Ultra-compact 110mm × 110mm design
- Supports up to 8× GMSL2 cameras
- Dual Ethernet (1× 10G + 1× 1G)
- Wide input voltage (19V–48V DC)
- Rich I/O: USB, CAN-FD, RS-485, I2S
- HDMI 2.1 display support
- Designed for robotics and vision AI applications
Specifications:
- Power Input: 19V–48V DC via XT30 (max 54V)
- USB: 2× USB 3.2 Type-A (10Gbps), 1× USB 3.0 Type-C (Recovery), 1× USB 2.0 Type-C (Debug)
- Ethernet: 1× 1G RJ45, 1× 10G RJ45
- Networking: 1x M.2 Key E slotfor WiFi/Bluetooth module
- GMSL: 8× GMSL2 (MAX96712 deserializer)
- CAN: 2× CAN (CAN-FD supported, isolated)
- RS-485: 1× RS-485
- I2S: 1× I2S
- GPIO: 4× GPI, 4× GPO (configurable as UART)
- Display: 1× HDMI 2.1
- Fan: 1× 4-pin (12V PWM)
- Buttons: 1× Reset, 1× Recovery
- RTC: 1× RTC 2-pin
- Installation: Desk / Wall mounting
- Operating Temperature: 10°C to 60°C (Thermal Grease), 10°C to 55°C (Thermal Pad)
- Dimensions: 111 x 111 x 38 mm
- Weight: 90 g
Package Includes:
1 x Seeed Carrier Board (reComputer Mini J501)
1 x Power Board
1 x GMSL Extension Board (GMSL x8)
1 x XT30 to DC power cable
1 x USB Type-C to Type-A cable
3 x GH-1.25 4-pin 100mm JST Cable
3 x GH-1.25 6-pin 100mm JST Cable
2 x M3*16 Stud (For GMSL Extension)
1 x M2.5*4 Screw
3 x M2*6 Screw
4 x M2.5*25 Stud
4 x M2.5*8 Screw



















