
1 / 2 · Click to enlarge
At a glance
Made by Seeed Studio, this pir / ir and optical sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor Module; sensor type Human Breathing and Heartbeat; detection distance (mm) Human Static Presence Detection: up to 6 Meters. Check that your power source supplies 5V before connecting it.
Key Highlights
- Item Type: Sensor Module
- Sensor Type: Human Breathing and Heartbeat
- Detection Distance (mm): Human Static Presence Detection: up to 6 Meters
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Sensor Module |
|---|---|
| Sensor Type | Human Breathing and Heartbeat |
| Detection Distance (mm) | Human Static Presence Detection: up to 6 Meters |
| Operating Voltage | 5V |
| Main control (MCU) | Seeed Studio XIAO ESP32C6 |
| LED | WS2812 RGB LED |
| Connectivity | 1 GPIO Port (D0, D10) |
| Power Supply Voltage (V) | 5V/1A Input |
| Power Consumption | 0.5w: Standby Mode, 0.8w: Activation Mode, 1.4w: work with Grove Relay status |
| Shipping Weight | 0.037 kg |
| Shipping Dimensions | 9 × 5 × 3 cm |
Overview
The SeeedStudio 60GHz mmWave Human Breathing and Heartbeat Sensor-MR60BHA2, made by Seeed Studio, is listed in our pir / ir and optical sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Sensor Module
- Sensor Type: Human Breathing and Heartbeat
- Detection Distance (mm): Human Static Presence Detection: up to 6 Meters
- Operating Voltage: 5V (match this to your power supply; too high a voltage can damage the part)
- Main control (MCU): Seeed Studio XIAO ESP32C6 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- LED: WS2812 RGB LED
- Connectivity: 1 GPIO Port (D0, D10) (confirm your cable or board uses the same connector)
- Power Supply Voltage (V): 5V/1A Input (match this to your power supply; too high a voltage can damage the part)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Feature:
- Wi-Fi & Bluetooth Enabled: Both modules are powered by XIAO ESP32 with pre-flashed ESPHome firmware, ensuring quick setup and customization.
- Heartbeat Detection Module: Sensitive Heartbeat Monitoring: Detects heartbeats from up to 1.5 meters.
- Static Presence Detection: Monitors stationary individuals up to 6 meters away.
- Environmental Sensing:BH1750 Light Sensor: Measures ambient light from 1 to 65,535 lux.
- WS2812 RGB LED: Customizable LED for visual feedback and DIY projects.
- Expandable Connectivity: Includes Grove GPIO ports for adding additional sensors and modules
- Light Sensor BH1750 Range: 1 to 65,535 lux with adjustable measurements up to 100,000 lux
- Pin Header Spacing 2.54mm
Package Include:
1 x SeeedStudio 60GHz mm Wave Human Breathing and Heartbeat Sensor-MR60BHA2Quick specs
- Item Type
- Sensor Module
- Sensor Type
- Human Breathing and Heartbeat
- Detection Distance (mm)
- Human Static Presence Detection: up to 6 Meters
- Operating Voltage
- 5V
- Main control (MCU)
- Seeed Studio XIAO ESP32C6
- LED
- WS2812 RGB LED


















