Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 40-module Grove sensor and actuator kit that connects with plug-and-play cables instead of soldering. It gives beginners and makers a broad, reusable hardware library for Arduino, Raspberry Pi and micro:bit projects.

Key Highlights

  • 40 Grove sensor and actuator modules in a single kit
  • Solder-free Grove connectors reduce wiring time and polarity errors
  • Inputs include temperature, humidity, light, sound, water and tilt
  • Outputs include LEDs, buzzer, relay and chainable RGB LED
  • Works with Arduino, Raspberry Pi and micro:bit via add-on boards
  • Colour manual with Arduino basics and three demo projects

Ideal For

  • Beginners learning Arduino, Raspberry Pi or micro:bit for the first time
  • Teachers and club leaders running hands-on electronics sessions
  • Makers who want a broad sensor library without soldering
  • Students building sensor-driven coursework and demo projects
  • Parents looking for a structured, reusable electronics kit

Buying Tip

Check that you already own, or add, the matching interface board for your platform: a Grove Base Shield for Arduino, a GrovePi HAT for Raspberry Pi, or a BitMaker or BitMaker Lite for micro:bit, since the kit does not include one.

Elecvora expert review

Our verdict

This is a well-organised way to get a large sensor and actuator library in one purchase, and the Grove connector removes the usual beginner frustration with wiring. It is a strong teaching and prototyping kit, provided you budget for the interface board your platform needs.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 40 modules cover a wide range of sensing and output needs
  • Plug-and-play Grove cables cut wiring time and polarity mistakes
  • Works across Arduino, Raspberry Pi and micro:bit with the right add-on board
  • Colour manual with three guided demo projects
  • Protective bags and a storage case keep the kit tidy

Cons

  • Development board and Grove shield, HAT or BitMaker are not included
  • Some advanced projects will need extra parts beyond the kit
  • Module-level depth is broad rather than specialised

Best for

Beginners, students and educators who want a broad plug-and-play sensor kit

Not ideal for

Buyers who need a complete ready-to-run board and shield bundle in one box

Specifications

Item TypeKit
Model No. / NameGrove Creator Kit
No. of Sensors/Modules40
Shipping Weight0.8 kg
Shipping Dimensions31 × 21 × 7 cm

What's in the box

  • 40 Grove sensor and actuator modules
  • Grove connector cables
  • Grove Creator Kit colour manual
  • Plastic storage box with individual module bags

Frequently Asked Questions

Do I need to solder anything?
No. The modules use Grove connectors and cables, so connections are made by plugging cables into the module and a compatible shield, HAT or BitMaker board.
Which boards can I use with this kit?
The kit is listed as compatible with Arduino using a Grove Base Shield, Raspberry Pi using a GrovePi HAT, and micro:bit using a BitMaker or BitMaker Lite.
Is a development board included?
The kit is a collection of 40 Grove modules, cables and a manual. The development board and the interface shield, HAT or BitMaker are not listed as included.
What can I build with the included modules?
The manual includes three demo projects: Smart Music Box, Smart Garden and Smart Cup. Beyond those, the mix of sensors and outputs supports light, sound, temperature, humidity, water, switching and joystick-based projects.
How is the kit packed?
Modules sit in individual protective plastic bags inside a plastic storage box, together with the Grove cables and the colour manual.
What are the shipping weight and dimensions?
The kit ships at approximately 0.8 kg in packaging measuring about 31 x 21 x 7 cm.

Overview

The Seeed Studio Grove Creator Kit Gamma is a 40-in-1 collection of Grove sensor and actuator modules aimed at people who want to build electronics projects without spending their evenings soldering headers or debugging breadboard wiring. Every module uses the Grove connector, so a single cable carries the signal and power between the module and your development board. That makes the kit approachable for first-time builders and still convenient for experienced makers who want a ready library of parts.

The kit is organised in a plastic storage box, with each module in its own protective plastic packet. Cables are included, so the modules can be plugged in, tested and packed away again between sessions.

Key Features

  • 40 modules covering both sensing and output, so one kit supports many different project ideas.
  • Grove cabling removes soldering and most manual wiring from the build process.
  • Input modules such as temperature, temperature and humidity, light, sound, water, tilt, magnetic switch, line finder, vibration and thumb joystick.
  • Output modules such as green and red LEDs, a multi-colour flash LED, a buzzer, a relay and chainable RGB LEDs.
  • Colour manual introducing Arduino and the Seeeduino, module programming, and three demo projects: Smart Music Box, Smart Garden and Smart Cup.

Specifications Explained

The headline number is 40: that is the count of Grove modules in the box, mixing sensors that read the world and actuators that respond to it. Having both types together means you can build a complete loop, for example reading a sensor and switching an LED, buzzer or relay in response.

The kit ships at roughly 0.8 kg in a box measuring about 31 x 21 x 7 cm. That is small enough to store on a shelf or carry to a class, workshop or club meeting, and the compartmented case keeps modules identifiable.

Because the connection standard is Grove rather than a specific microcontroller, the modules are not tied to one board family. The development board itself is not part of the kit, so you choose the platform you already use or want to learn.

Compatibility and Requirements

The kit is stated as compatible with three platforms, each needing an additional interface board:

  • Arduino: requires a Grove Base Shield.
  • Raspberry Pi: requires a GrovePi HAT.
  • micro:bit: requires a BitMaker or BitMaker Lite.

Plan for the matching shield, HAT or BitMaker plus your chosen development board, since these are not listed among the kit contents. The manual uses the Seeeduino Lotus, an Arduino-compatible board, for its example code.

Typical Uses

Use the kit for classroom and club teaching, introductory Arduino or Raspberry Pi courses, and self-directed learning at home. Common directions include weather and plant monitoring with the temperature, humidity and water modules, interactive light and sound projects, simple switching projects with the relay, and menu or game input using the thumb joystick. The demo projects in the manual give a guided starting point before you branch into your own designs.

What's in the Box

The kit contains 40 Grove modules, Grove connector cables and a colour manual, all packed in a plastic storage box with individual protective bags for the modules.

Grove - Tilt SwitchGrove - Temperature SensorGrove - Water SensorGrove - Rotary Angle SensorGrove - Sound SensorGrove - Light Sensor v1.2Grove - Green LEDGrove - BuzzerGrove - Magnetic SwitchGrove - Line FinderGrove - RelayGrove - Vibration Sensor (SW-420)Grove - Temperature & Humidity Sensor (DHT11)Grove - Thumb JoystickGrove - Chainable RGB LED

Quick specs

Item Type
Kit
Model No. / Name
Grove Creator Kit
No. of Sensors/Modules
40
Shipping Weight
0.8 kg
Shipping Dimensions
31 × 21 × 7 cm
See all specifications