Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An open-top 8-pin SSOP/TSSOP socket with 0.65 mm pitch, gold-plated beryllium copper contacts and a -65 °C to +150 °C operating range. It gives programmers and test fixtures stable, repeatable contact with fine-pitch ICs.

Key Highlights

  • 8-pin SSOP/TSSOP socket with fine 0.65 mm contact pitch
  • Beryllium copper contacts, gold-plated over nickel for low impedance
  • PEI/PPS insulator shell for strength and long service life
  • Rated for -65 °C to +150 °C burn-in and environmental testing
  • Open-top design for straightforward insertion and removal
  • Through-hole PCB or socket-mounted fixture installation

Ideal For

  • Test engineers programming fine-pitch SSOP/TSSOP devices
  • Repair technicians who need to swap ICs without soldering
  • Burn-in and reliability labs running thermal cycling
  • Makers and students working with 0.65 mm pitch packages
  • Small-batch production teams reusing programmed chips

Buying Tip

Verify your IC is an 8-pin SSOP/TSSOP with 0.65 mm pitch and roughly 4.4 mm body width, since the socket will not accept other lead spacings.

Elecvora expert review

Our verdict

A well-specified open-top socket for 8-pin fine-pitch packages, with contact materials and a temperature range that suit both bench programming and burn-in. It is a focused part rather than a universal adapter, so package checking is essential.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Gold-plated beryllium copper contacts support low impedance
  • Wide -65 °C to +150 °C range for thermal testing
  • PEI/PPS shell built for repeated insertions
  • Open-top design speeds up loading and removal

Cons

  • Fits only 8-pin 0.65 mm pitch SSOP/TSSOP devices
  • Requires a programmer or fixture to be useful
  • Through-hole mounting needs soldering or a matching socket

Best for

Programming and testing 8-pin SSOP/TSSOP ICs in labs and fixtures

Not ideal for

Other package sizes, pitches or solder-in permanent applications

Specifications

No. of Pins8
PackageTSSOP / SSOP (28-pin, ~4.4 mm body width)
Pitch (mm)0.65
Insulator MaterialPEI / PPS (engineering thermoplastic)
Contact MaterialBeryllium Copper (Be Cu), gold-plated (~30 µm) over nickel (~50 µm)
Operating Temperature (°C)–65 °C to +150 °C
Mounting TypeThrough-hole (PCB soldered) / socket-mounted for test fixture
Length (mm)37
Width (mm)24
Weight (g)10
Shipping Weight0.03 kg
Shipping Dimensions10 × 8 × 3 cm

What's in the box

  • 1 x OTS28-0.65-01 SSOP8/TSSOP programming socket

Frequently Asked Questions

Which IC packages does this socket accept?
It accepts 8-pin SSOP and TSSOP packages with a 0.65 mm pitch and a body width of approximately 4.4 mm. Devices with other pitches or pin counts will not fit.
Does the socket need power?
No. It is a passive contact interface, so it needs no supply of its own; the connected programmer or test fixture provides the signals.
Can I solder it to a PCB?
Yes. The through-hole design allows soldered mounting on a test board, or the socket can be seated in a matching fixture.
What is included with the purchase?
The package contains one OTS28-0.65-01 SSOP8/TSSOP programming socket only. ICs and cables are not included.
How should I care for the contacts?
Keep the socket clean and dry, avoid touching the gold contacts, and store it away from dust so contact resistance stays stable.
Is it suitable for burn-in testing?
The -65 °C to +150 °C operating range and PEI/PPS insulator make it appropriate for burn-in and environmental test setups within those limits.

Overview

The OTS28-0.65-01 is a precision open-top socket for 8-pin SSOP and TSSOP packages. It is designed for programming, functional testing and burn-in work where a chip must be seated, contacted and removed many times without soldering it down. The socket accepts fine-pitch parts with a 0.65 mm lead pitch and a body width of about 4.4 mm.

Contact quality is the core of any test socket, and this model uses beryllium copper spring contacts plated with roughly 30 µm of gold over about 50 µm of nickel. That combination supports low contact impedance and consistent behaviour across repeated actuations. The insulator is moulded from PEI or PPS engineering thermoplastic, chosen for mechanical strength and dimensional stability.

Key Features

  • Open-top construction for quick loading and unloading of ICs
  • Fine 0.65 mm pitch suited to compact SSOP/TSSOP bodies
  • Gold-plated beryllium copper contacts for stable electrical contact
  • PEI/PPS shell resists wear in repeated test cycles
  • Wide -65 °C to +150 °C operating window
  • Through-hole footprint for PCB or fixture integration

Specifications Explained

Pitch and package

The 0.65 mm pitch defines the spacing between adjacent leads, so the socket only fits devices built to that dimension. It is intended for 8-pin SSOP/TSSOP parts with a body width near 4.4 mm; check your datasheet before ordering.

Contact materials

Beryllium copper retains spring force well, while the gold layer over nickel limits oxidation and keeps resistance low through many insert cycles. This matters when measuring small signals or programming at speed.

Temperature range

Operation from -65 °C to +150 °C covers ordinary bench work as well as burn-in and thermal cycling, where lesser plastics can soften or crack.

Size and mounting

At 37 x 24 mm and about 10 g, the socket fits neatly onto a programmer module or test board. The through-hole format allows soldered mounting or seating in a socketed fixture.

Compatibility and Requirements

Use only with 8-pin SSOP/TSSOP devices at 0.65 mm pitch and approximately 4.4 mm body width. The socket is a passive interconnect: it carries signals between your IC and the host board, so a programmer or test fixture is required. Confirm your PCB footprint matches the through-hole layout before soldering.

Typical Uses

  • Firmware programming of small SSOP/TSSOP ICs
  • Bench validation and incoming inspection
  • Burn-in and environmental chamber testing
  • Small-batch production where parts are reused
  • Educational and repair labs working with fine-pitch packages

What's in the Box

One OTS28-0.65-01 SSOP8/TSSOP programming socket.

Quick specs

No. of Pins
8
Pitch (mm)
0.65
Insulator Material
PEI / PPS (engineering thermoplastic)
Contact Material
Beryllium Copper (Be Cu), gold-plated (~30 µm) over nickel (~50 µm)
Operating Temperature (°C)
–65 °C to +150 °C
Mounting Type
Through-hole (PCB soldered) / socket-mounted for test fixture
See all specifications