Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This memory ic is a good fit for everyday home and hobby use. Main specs: manufacturer Generic; model no. / name 8Mbit Flash Memory IC; nominal voltage (v) 2.7V-3.6V. Check that your power source supplies 2.7V-3.6V before connecting it.

Key Highlights

  • Manufacturer: Generic
  • Model No. / Name: 8Mbit Flash Memory IC
  • Nominal Voltage (V): 2.7V-3.6V

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerGeneric
Model No. / Name8Mbit Flash Memory IC
Nominal Voltage (V)2.7V-3.6V
InterfaceSPI Compatible: Mode 0 and Mode 3
Max. Clock Frequency (MHz)Up to 66 MHz
Endurance100,000 Cycles (typical)
Power Consumption- Active Read Current: 10 mA (typical) - Standby Current: 5 µA (typical)
Flexible Erase CapabilityUniform 4-Kbyte sectors Uniform 32-Kbyte overlay blocks Uniform 64-Kbyte overlay blocks
Additional Specs.Fast Erase and Byte Program '- Chip Erase Time: 35 ms (typical) - Sector/Block Erase Time: 18 ms (typical) - Byte Program Time: 7 µs (typical), 7 µs (typical)
Operating Temperature (°C)Commercial: 0°C to +70°C Industrial: -40°C to +85°C
Memory Capacity8Mb (1M x 8)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The SST25VF080B-50-4C-S2AF-T - 3.6V 8Mbit Flash Memory SPI Serial IC SMD-8 Package is listed in our memory ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Generic
  • Model No. / Name: 8Mbit Flash Memory IC (more memory leaves room for larger programs and buffers)
  • Nominal Voltage (V): 2.7V-3.6V (match this to your power supply; too high a voltage can damage the part)
  • Interface: SPI Compatible: Mode 0 and Mode 3 (confirm your cable or board uses the same connector)
  • Max. Clock Frequency (MHz): Up to 66 MHz (make sure the rest of your system works at this frequency)
  • Endurance: 100,000 Cycles (typical)
  • Power Consumption: - Active Read Current: 10 mA (typical) - Standby Current: 5 µA (typical) (your supply must deliver at least this much current)
  • Flexible Erase Capability: Uniform 4-Kbyte sectors Uniform 32-Kbyte overlay blocks Uniform 64-Kbyte overlay blocks

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

)Flash memory is a long-life and non-volatile storage chip that is widely used in embedded systems. It can keep stored data and information even when the power is off. It can be electrically erased and reprogrammed. Flash memory was developed from EEPROM (electronically erasable programmable read-only memory). 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF080B devices are enhanced with improved operating frequency and lower power consumption. SST25VF080B SPI serial flash memories are manufactured with proprietary, high-performance CMOS Super Flash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. The SST25VF080B devices significantly improve performance and reliability, while lowering power consumption. The devices write (program or erase) with a single power supply of 2.7V-3.6V for SST25VF080B. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the Super Flash technology uses less current to program and has a shorter erase time, the total energy consumed during any erase or program operation is less than alternative flash memory technologies.

Features:

  1. Single Voltage Read and Write Operations
  2. Superior Reliability
  3. Low-Power Consumption
  4. Flexible Erase Capability
  5. Fast Erase and Byte Program
  6. Auto Address Increment (AAI) Programming

Note:
  1. Product Images are shown for illustrative purposes only and may differ from the actual product.
  2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.

Package Includes:

1 x SST25VF080B-50-4C-S2AF-T - 3.6V 8Mbit Flash Memory SPI Serial 8-Pin SOIC

Quick specs

Manufacturer
Generic
Model No. / Name
8Mbit Flash Memory IC
Nominal Voltage (V)
2.7V-3.6V
Interface
SPI Compatible: Mode 0 and Mode 3
Max. Clock Frequency (MHz)
Up to 66 MHz
Endurance
100,000 Cycles (typical)
See all specifications