Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This linear voltage regulator ic is a good fit for everyday home and hobby use. Main specs: input voltage (v) 5.5~48; no. of outputs 1; max. operating current (a) 3. Check that your power source supplies 5.5~48 before connecting it.

Key Highlights

  • Input Voltage (V): 5.5~48
  • No. of Outputs: 1
  • Max. Operating Current (A): 3

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Input Voltage (V)5.5~48
No. of Outputs1
Max. Operating Current (A)3
Max. Clock Frequency (MHz)1
Length (mm)10
Width (mm)7
Weight (g)1
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The ST1S14PHR - 48V 3A Step-down Switching Regulator 8-Pin HSOP is listed in our linear voltage regulator ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Input Voltage (V): 5.5~48 (match this to your power supply; too high a voltage can damage the part)
  • No. of Outputs: 1
  • Max. Operating Current (A): 3 (your supply must deliver at least this much current)
  • Max. Clock Frequency (MHz): 1 (make sure the rest of your system works at this frequency)
  • Length (mm): 10 (measure your mounting space before ordering)
  • Width (mm): 7 (measure your mounting space before ordering)
  • Weight (g): 1 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The ST1S14PHR is a step-down monolithic power switching Voltage Regulator, able to deliver up to 3ADC current to the load depending on the application conditions. The high current level is also achieved thanks to an HSOP8 package with the exposed frame, which allows reducing the Rth (JA) down to approximately 40°C/W. The output voltage can be set from 1.22V. The device uses an internal N-channel DMOS transistor (with a typical RDS (on) of 200mR) as the switching element to minimize the size of the external components. The internal oscillator fixes the switching frequency at 850kHz. Power good open collector output validates the regulated output voltage as soon as it reaches the regulation. Pulse-by-pulse current limit offers an effective constant current short-circuit protection. Current fold-back decreases overstress in a persistent short-circuit condition.


Features:

  1. Internal Soft-start
  2. Power Good Open Collector Output
  3. Current Mode Architecture
  4. Embedded Compensation Network
  5. Zero Load Current Operation
  6. Internal Current Limiting
  7. Inhibit for Zero Current Consumption
  8. 2mA Maximum Quiescent Current over Temperature Range
  9. 250mR Typical RDS (On)
  10. Thermal Shutdown

Package Includes:

1 x ST1S14PHR - 48V 3A Step-down Switching Regulator 8-Pin HSOP

Quick specs

Input Voltage (V)
5.5~48
No. of Outputs
1
Max. Operating Current (A)
3
Max. Clock Frequency (MHz)
1
Length (mm)
10
Width (mm)
7
See all specifications