
1 / 5 · Click to enlarge
AI Summary
A 51g flat brushless motor with a 40mm stator and 300 KV rating, tuned for efficient low-RPM torque in long-endurance multirotors. Pair it with 20A ESCs and the recommended 12 to 15 inch props.
Key Highlights
- 300 KV windings deliver torque at low RPM for endurance flights
- 40mm stator with 18 arms and 24 poles for smooth power delivery
- Rated to 250W maximum with a 20A ESC requirement
- Light 51g body with hollow-cut caps for a better thrust-to-weight ratio
- Stepped and knurled cap design helps resist loosening in flight
- Accepts EOLO CN 12x5, 13x5 and 15x5.5 propellers
Ideal For
- Long-endurance multirotor builders
- Aerial photography pilots using larger, slower props
- Drone makers refreshing a flat-motor power system
- Hobbyists building efficient 12 to 15 inch propeller setups
- Pilots prioritising flight time over high-RPM performance
Buying Tip
Check your ESC is rated for at least 20A and your frame accepts a 43.6mm motor diameter before ordering, since this is a single motor, not a set.
Elecvora expert review
Our verdict
The V4004 KV300 is a purpose-built endurance motor: flat, light and happiest turning larger props at modest RPM. It rewards careful propeller and ESC matching rather than aggressive throttle use.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Efficient low-RPM torque from the 40mm 18N24P stator
- Light 51g body with hollow-cut caps
- Knurled stepped cap helps keep props secure
- Clear 20A ESC and propeller recommendations
Cons
- Sold as a single motor, so a full build needs several
- Not intended for high-RPM acrobatic flying
- Requires a suitable 20A ESC, which is not included
Best for
Long-endurance and aerial photography multirotors
Not ideal for
High-RPM acrobatic or racing builds
Specifications
| Motor KV (RPM/V) | 300 KV |
|---|---|
| Motor Type | Brushless Motor |
| Stator Thickness | 4mm |
| Stator Diameter | 40mm |
| No. of Stator Arms | 18 |
| No. of Stator Poles | 24 |
| No-Load Current (A/10V) | 0.2A/10V |
| Motor Resistance | 448mΩ |
| Continuous Discharge Current (A) | 10A/60s |
| Max. Power (W) | 250W |
| Weight (g) | 51 |
| Outer Diameter (mm) | 43.6 |
| Motor Body Length (mm) | 16 |
| Required ESC (A) | 20 |
| Recommended Prop(inch) | EOLO CN12x5, EOLO CN13x5, EOLO CN15x5.5 |
| Shipping Weight | 0.152 kg |
| Shipping Dimensions | 12 × 9 × 5 cm |
What's in the box
- 1 x SUNNYSKY V4004 KV300 brushless motor
Frequently Asked Questions
What does the 300 KV rating mean for my build?
Which ESCs do I need?
Which propellers are recommended?
How much power can it handle?
Is this a set of motors or a single unit?
How should I care for these motors?
Overview
The SUNNYSKY V4004 KV300 is a brushless outrunner aimed at multirotor pilots who value flight time over raw RPM. Its flat 40mm stator and 4mm stator thickness, combined with an 18-arm, 24-pole configuration, are arranged to generate torque at lower rotational speeds. That makes the motor a natural fit for larger, slower-turning propellers and for airframes where smooth, continuous power matters more than snap acceleration.
At roughly 51g per motor, the V4004 keeps the power system reasonably light. The cap is hollow-cut to remove material without sacrificing strength, which helps the overall thrust-to-weight ratio. A stepped and knurled cap surface also gives the propeller mounting area extra grip, reducing the chance of a mount working loose during flight.
Key Features
- 300 KV windings: low-RPM torque for endurance-focused builds.
- 18N24P stator: 18 arms and 24 poles for smooth, consistent output.
- 250W maximum power: matched to a 20A ESC.
- Lightweight construction: about 51g per motor with hollow-cut caps.
- Secure prop mounting: stepped and knurled cap design.
- Propeller options: EOLO CN 12x5, 13x5 and 15x5.5.
Specifications Explained
KV rating describes RPM per volt of input. At 300 KV, the motor turns relatively slowly for each volt applied, which is exactly what larger propellers need to move air efficiently without excessive current draw.
Stator dimensions matter because they set the motor's torque character. A 40mm diameter with 4mm thickness gives this motor its flat, wide shape and its low-speed pulling ability.
No-load current of 0.2A at 10V indicates the baseline draw when the motor spins without a propeller. Motor resistance of 448mΩ and a continuous discharge rating of 10A for 60 seconds give you a sense of how the windings behave under load, while the 250W maximum marks the ceiling to respect when choosing propellers and throttle curves.
Physical size: a 43.6mm outer diameter and a 16mm body length keep the motor compact for its stator size, which helps on airframes with tight motor mounts.
Compatibility and Requirements
Each motor requires a 20A ESC. Recommended propellers are the EOLO CN 12x5, EOLO CN 13x5 and EOLO CN 15x5.5. Builders should confirm that their frame, ESC rating and propeller choice suit the 250W maximum and the 10A/60s continuous discharge figure. No other compatibility information is specified for this motor.
Typical Uses
The V4004 KV300 suits long-endurance multirotors, steady aerial photography platforms and other builds where low-RPM torque and efficiency are priorities. It is less suited to high-RPM acrobatic flying, where a higher KV motor is normally preferred.
What's in the Box
- 1 x SUNNYSKY V4004 KV300 brushless motor

Quick specs
- Motor KV (RPM/V)
- 300 KV
- Motor Type
- Brushless Motor
- Stator Thickness
- 4mm
- Stator Diameter
- 40mm
- No. of Stator Arms
- 18
- No. of Stator Poles
- 24



















