
1 / 6 · Click to enlarge
AI Summary
A compact SW-420 vibration switch module with an LM393 comparator and adjustable threshold for Arduino projects. It outputs a clean digital signal so your microcontroller can detect vibration and trigger an alarm.
Key Highlights
- SW-420 normally closed vibration sensor switch
- LM393 comparator delivers a clean digital output
- Adjustable threshold via onboard potentiometer
- Wide 3.3 to 5 V operating voltage
- Compact 40 x 15 x 7 mm board with mounting holes
- Green indicator LED shows output state
Ideal For
- Arduino beginners learning digital sensor inputs
- Makers building vibration-triggered alarms
- Students working on motion detection projects
- Hobbyists adding tamper detection to enclosures
- Electronics enthusiasts needing an adjustable vibration switch
Buying Tip
Check the power polarity before connecting: the module can be damaged if VCC and GND are reversed.
Elecvora expert review
Our verdict
The SW-420 module is a practical, low-cost way to add adjustable vibration sensing to Arduino projects. Its clean comparator output and wide voltage range make it easy to integrate, provided you respect the power polarity.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple digital output that is easy to read
- Adjustable threshold via potentiometer
- Works with 3.3 V and 5 V systems
- Compact and lightweight with mounting holes
Cons
- No reverse polarity protection mentioned
- Requires wiring to a microcontroller
- Sensitivity adjustment may need trial and error
Best for
Arduino hobbyists and students building vibration alarms or motion detectors
Not ideal for
Applications requiring precise vibration measurement or industrial-grade sensing
Specifications
| Model No. / Name | Vibration Sensor Module |
|---|---|
| Operating Voltage (VDC) | 3.3 to 5 |
| Dimensions (L x W x H) mm | 40x15x7 |
| Weight (g) | 3 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 6 × 4 × 3 cm |
What's in the box
- 1 x SW-420 Vibration Sensor Module Alarm
Frequently Asked Questions
What voltage does the SW-420 module require?
How do I connect it to an Arduino?
How does the output behave when there is no vibration?
Can I adjust the sensitivity?
What is included in the package?
What happens if I reverse the power?
Overview
The SW-420 Vibration Sensor Module Alarm is a small, ready-to-use board that adds vibration detection to your electronics projects. It combines an SW-420 normally closed vibration switch with an LM393 comparator, so the raw switch signal is converted into a clean digital output that a microcontroller can read reliably. The board operates from 3.3 to 5 V and measures just 40 x 15 x 7 mm, making it easy to fit into tight enclosures or small project boxes.
Whether you are building a simple alarm, a movement-triggered logger, or a tamper-detection switch, this module gives you a straightforward way to sense vibration without designing your own comparator circuit.
Key Features
- SW-420 normally closed vibration switch: detects vibration and momentary disconnection.
- LM393 comparator output: provides a clean signal with good waveform and strong driving ability.
- Adjustable sensitivity: an onboard potentiometer sets the threshold at which vibration triggers the output.
- Wide voltage range: works from 3.3 to 5 V, matching common Arduino logic levels.
- Mounting holes: bolt holes make it easy to fix the board to a chassis or panel.
- Indicator LED: a green LED shows the output state for quick visual feedback.
Specifications Explained
Operating Voltage
The module accepts 3.3 to 5 VDC, so it can be powered directly from most Arduino boards and similar microcontrollers. The output level is close to the input voltage, helping it interface with 3.3 V and 5 V logic systems.
Comparator and Output
The LM393 comparator cleans up the vibration switch signal and provides a digital high or low output. When there is no vibration, the switch is closed and the output is low, with the green LED lit. When vibration occurs, the switch momentarily opens, the output goes high, and the LED turns off. This behaviour makes it easy to detect vibration by reading a single digital pin.
Adjustable Threshold
The onboard potentiometer lets you set how much vibration is needed to trigger a change in output. Turn it to make the module more or less sensitive to movement, depending on your application.
Size and Weight
At 40 x 15 x 7 mm and only 3 g, the board is lightweight and compact. It can be mounted on small robots, enclosures, or prototype boards without adding significant bulk.
Compatibility and Requirements
The module is designed for use with microcontrollers such as Arduino boards that can read a digital input. It requires a 3.3 to 5 VDC power supply. No additional components are needed to use the digital output, though you will need a way to connect the pins to your microcontroller, such as jumper wires or a breadboard. Always observe correct power polarity; reversing the power can damage the comparator chip.
Typical Uses
- Vibration-triggered alarms and buzzers
- Motion or tamper detection in enclosures
- Arduino learning projects and sensor experiments
- Simple condition monitoring on small machines or models
- DIY security gadgets and interactive installations
What's in the Box
Package includes: 1 x Vibration sensor module alarm Motion sensor module vibration switch SW-420.
Quick specs
- Model No. / Name
- Vibration Sensor Module
- Operating Voltage (VDC)
- 3.3 to 5
- Dimensions (L x W x H) mm
- 40x15x7
- Weight (g)
- 3
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 6 × 4 × 3 cm

















