Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Texas Instruments, this pic programmers and debuggers is a good fit for everyday home and hobby use. Main specs: item type Programmer, Debugger; voltage rating (v) 1.2 to 3.6; minimum target voltage 1.2V. Check that your power source supplies 1.2 to 3.6 before connecting it.

Key Highlights

  • Item Type: Programmer, Debugger
  • Voltage Rating (V): 1.2 to 3.6
  • Minimum Target Voltage: 1.2V

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeProgrammer, Debugger
Voltage Rating (V)1.2 to 3.6
Minimum Target Voltage1.2V
Maximum Target Voltage3.6V
Operating Temperature (°C)0°C to 85°C
Voltage Range (V)3.3V, Regulated CC Debugger
Maximum Target Current200mA
SupportedWindows 7 Windows 8 Windows XP SP2/SP3 Windows 2000
Length (mm)60
Width (mm)40
Weight (g)25
Shipping Weight0.03 kg
Shipping Dimensions11 × 12 × 4 cm

Overview

The CC-DEBUGGER - Programmer for RF Sys-on-Chips, made by Texas Instruments, is listed in our pic programmers and debuggers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Programmer, Debugger
  • Voltage Rating (V): 1.2 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Minimum Target Voltage: 1.2V (match this to your power supply; too high a voltage can damage the part)
  • Maximum Target Voltage: 3.6V (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): 0°C to 85°C
  • Voltage Range (V): 3.3V, Regulated CC Debugger (quoted range is usually line-of-sight; walls and interference shorten it)
  • Maximum Target Current: 200mA (your supply must deliver at least this much current)
  • Supported: Windows 7 Windows 8 Windows XP SP2/SP3 Windows 2000 (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is CC-DEBUGGER - Programmer for RF Sys-on-Chips. The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling selected devices from SmartRF Studio.
Pinout:
CC-DEBUGGER - Programmer for RF Sys-on-Chips

Features:

  1. CC-Debugger can be used to program and debug the following 8051-based system-on-chips from Texas Instruments:
    • CC1110, CC1111
    • CC2430, CC2431
    • CC2510, CC2511
    • CC2530, CC2531, CC2533
    • CC2540, CC2541
    • CC2543, CC2544, CC2545
2.It is possible to control the same devices from SmartRF Studio. In addition, CC-Debugger can control the following transceivers from SmartRF Studio:
    • CC1120, CC1121, CC1125, CC1175
    • CC1100, CC1101, CC110L, CC113L, CC115L
    • CC2500, CC2520
3.It can also be used to program the PurePath Wireless devices:
    • CC8520, CC8521
    • CC8530, CC8531

Package Includes:

1 x CC Debugger

1 x USB cable


1 x 10Pins flat cable

Quick specs

Item Type
Programmer, Debugger
Voltage Rating (V)
1.2 to 3.6
Minimum Target Voltage
1.2V
Maximum Target Voltage
3.6V
Operating Temperature (°C)
0°C to 85°C
Voltage Range (V)
3.3V, Regulated CC Debugger
See all specifications

More from Texas Instruments

View all →

Related Products

View all →