Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Texas Instruments, this amplifier and comparator ic is a good fit for everyday home and hobby use. Main specs: manufacturer Texas Instruments; no. of channels 1; gain bandwidth product (gbp) 1.3MHz. Check that your power source supplies 1.35mV, 350uV before connecting it.

Key Highlights

  • Manufacturer: Texas Instruments
  • No. of Channels: 1
  • Gain Bandwidth Product (GBP): 1.3MHz

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerTexas Instruments
No. of Channels1
Gain Bandwidth Product (GBP)1.3MHz
Input Offset Voltage (Vos)1.35mV, 350uV
Case/PackageDIP, DIP-8
No. of Pins8, 8Pins
Input Bias Current (Ib)0.01pA
Amplifier TypeLow Power
Product RangeMulticomp Pro RJ45 Adapter
Operating Temperature Max85°C
IC MountingThrough Hole
Operating Temperature Min-40°C
Slew Rate Typ1.5V/µs
Supply Voltage4.5V~15.5V
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The LMC6001AIN/NOPB-TEXAS INSTRUMENTS-Operational Amplifier, 1 Amplifier, 1.3 MHz, 1.5 V/µs, 4.5V to 15.5V, DIP, 8 Pins, made by Texas Instruments, is listed in our amplifier and comparator ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Texas Instruments
  • No. of Channels: 1
  • Gain Bandwidth Product (GBP): 1.3MHz (make sure the rest of your system works at this frequency)
  • Input Offset Voltage (Vos): 1.35mV, 350uV (match this to your power supply; too high a voltage can damage the part)
  • Case/Package: DIP, DIP-8
  • No. of Pins: 8, 8Pins
  • Input Bias Current (Ib): 0.01pA (your supply must deliver at least this much current)
  • Amplifier Type: Low Power (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

LMC6001AIN/NOPB-TEXAS INSTRUMENTS-Operational Amplifier, 1 Amplifier, 1.3 MHz, 1.5 V/µs, 4.5V to 15.5V, DIP, 8 Pins.The LMC6001AIN/NOPB is an ultra-low input Current Amplifier Featuring 100% tested input currents of 25fA maximum, low operating power and ESD protection of 2000V, this amplifier achieves a new industry benchmark for low input current operational amplifier. To avoid long turn-on settling times common in other low input current op amps, the amplifier is tested three times in the first minute of operation. Even units that meet the 25fA limit are rejected if they drift. Because of the ultra-low input current noise of 0.13fA/√Hz, the amplifier can provide almost noiseless amplification of high resistance signal sources. Adding only 1dB at 100kΩ, 0.1dB at 1MΩ and 0.01dB or less from 10MΩ to 2,000MΩ, the LMC6001 is an almost noiseless amplifier. Because input referred noise is only 22nV/√Hz, this amplifier can achieve higher signal to noise ratio than JFET input type electrometer amplifiers.

Note: Images for reference only.

Specifications:

No. of Channels:: 1Channels Gain Bandwidth Product:: 1.3MHz Slew Rate Typ:: 1.5V/µs Supply Voltage Range:: 4.5V to 15.5V IC Case / Package:: DIP No. of Pins:: 8Pins Amplifier Type:: Low Power Rail to Rail:: Rail - Rail Output (RRO) Input Offset Voltage:: 1.35mV Input Bias Current:: 0.1pA IC Mounting:: Through Hole Operating Temperature Min:: -40°C Operating Temperature Max:: 85°C

For detailed specifications, please refer to datasheet in Attachments.

Package Includes:

1 x LMC6001AIN/NOPB-TEXAS INSTRUMENTS-Operational Amplifier, 1 Amplifier, 1.3 MHz, 1.5 V/µs, 4.5V to 15.5V, DIP, 8 Pins

Quick specs

Manufacturer
Texas Instruments
No. of Channels
1
Gain Bandwidth Product (GBP)
1.3MHz
Input Offset Voltage (Vos)
1.35mV, 350uV
Case/Package
DIP, DIP-8
No. of Pins
8, 8Pins
See all specifications