Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Texas Instruments, this adc & dac converter ic is a good fit for everyday home and hobby use. Main specs: manufacturer Texas Instruments; case/package TSSOP 20; resolution 10bit. Check that your power source supplies 2.7 to 3.3 before connecting it.

Key Highlights

  • Manufacturer: Texas Instruments
  • Case/Package: TSSOP 20
  • Resolution: 10bit

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerTexas Instruments
Case/PackageTSSOP 20
Resolution10bit
InterfaceSPI
Voltage Rating (V)2.7 to 3.3
No. of Pins20
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The TLV5608IPW-Texas Instruments-Digital to Analogue Converter, 10 bit, 283 kSPS, SPI, 2.7V to 3.3V, 4.5V to 5.5V, TSSOP, 20 Pins, made by Texas Instruments, is listed in our adc & dac converter ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Texas Instruments
  • Case/Package: TSSOP 20
  • Resolution: 10bit
  • Interface: SPI (confirm your cable or board uses the same connector)
  • Voltage Rating (V): 2.7 to 3.3 (match this to your power supply; too high a voltage can damage the part)
  • No. of Pins: 20
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

TLV5608IPW-Texas Instruments-Digital to Analogue Converter, 10 bit, 283 kSPS, SPI, 2.7V to 3.3V, 4.5V to 5.5V, TSSOP, 20 Pins. The TLV5608IPW is a pin-compatible 8-channel 10-bit voltage output Digital-to-analog Converter (DAC) with a flexible serial interface. The serial interface allows glueless interface to TMS320 and SPI, QSPI and MICROWIRE serial ports. It is programmed with a 16-bit serial string containing 4 control and 12 data bits. Additional features are a power-down mode, an LDAC input for simultaneous update of all eight DAC outputs and a data output which can be used to cascade multiple devices. The resistor string output voltage is buffered by a rail-to-rail output amplifier with a programmable settling time to allow the designer to optimize speed vs power dissipation. The buffered, high-impedance reference input can be connected to the supply voltage. Implemented with a CMOS process, the DAC is designed for single-supply operation from 2.7 to 5.5V and can operate on two separate analog and digital power supplies. Note: Images for reference only.

Features: 

  • Programmable settling time vs power consumption
  • Compatible with TMS320 and SPI serial ports
  • Monotonic over temperature
  • Low power consumption
  • Reference input buffers
  • Power-down mode
  • Buffered, high impedance reference inputs
  • Data output for daisy-chaining
For detailed specifications, please refer to datasheet in Attachments.

Package Includes:

1 x TLV5608IPW-Texas Instruments-Digital to Analogue Converter, 10 bit, 283 kSPS, SPI, 2.7V to 3.3V, 4.5V to 5.5V, TSSOP, 20 Pins

Quick specs

Manufacturer
Texas Instruments
Case/Package
TSSOP 20
Resolution
10bit
Interface
SPI
Voltage Rating (V)
2.7 to 3.3
No. of Pins
20
See all specifications