Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Texas Instruments, this drivers and interfaces ic is a good fit for everyday home and hobby use. Main specs: manufacturer Texas Instruments; case/package LQFP; operating temperature min 0°C.

Key Highlights

  • Manufacturer: Texas Instruments
  • Case/Package: LQFP
  • Operating Temperature Min: 0°C

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerTexas Instruments
Case/PackageLQFP
Operating Temperature Min0°C
No. of Pins32
USB StandardUSB 2.0
Data Transfer Rate12Mbps
No. of Ports3Ports
USB IC TypeUSB Hub Controller
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The TUSB2036VF-TEXAS INSTRUMENTS-TUSB2036VF-USB Interface, USB Hub Controller, USB 2.0, 3 V, 3.6 V, LQFP, 32 Pins, made by Texas Instruments, is listed in our drivers and interfaces ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Texas Instruments
  • Case/Package: LQFP
  • Operating Temperature Min: 0°C
  • No. of Pins: 32
  • USB Standard: USB 2.0
  • Data Transfer Rate: 12Mbps
  • No. of Ports: 3Ports (confirm your cable or board uses the same connector)
  • USB IC Type: USB Hub Controller

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The TUSB2036VF is a 3-port Hub that provides up to three downstream ports in compliance with the USB 2.0 specification. Because this device is implemented with a digital state machine instead of a microcontroller, no firmware programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. The downstream ports support both full-speed and low-speed devices by automatically setting the slew rate according to the speed of the device attached to the ports. The configuration of the BUSPWR pin selects either the bus-powered or the self-powered mode. The introduction of the DP0 pull-up resistor disable pin, DP0PUR, makes it much easier to implement an onboard bus/self-power dynamic-switching circuitry. With the new function pin, the end-equipment vendor can reduce the total board cost while adding additional product value. The TUSB2036 supports both bus-powered and self-powered modes.

Specifications:

IC Case / Package: LQFP Operating Temperature Min: 0°C No. of Pins: 32Pins USB Standard: USB 2.0 Data Rate: 12Mbps No. of Ports: 3Ports USB IC Type: USB Hub Controller

Package Includes:

1 x TUSB2036VF-TEXAS INSTRUMENTS-TUSB2036VF-USB Interface, USB Hub Controller, USB 2.0, 3 V, 3.6 V, LQFP, 32 Pins

Quick specs

Manufacturer
Texas Instruments
Case/Package
LQFP
Operating Temperature Min
0°C
No. of Pins
32
USB Standard
USB 2.0
Data Transfer Rate
12Mbps
See all specifications