Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The UNI-T UT-CS09D is a flexible Rogowski coil current sensor for measuring AC current up to 3000A in tight or awkward spaces. Its bendable clamp and 280mm length let you reach conductors that rigid clamps cannot.

Key Highlights

  • Flexible Rogowski coil reaches conductors in tight spaces
  • Three AC current ranges: 30A, 300A and 3000A
  • Frequency response from 45Hz to 500Hz
  • 280mm long sensing loop for wrapping around busbars
  • Direct current display with UT206B or UT208B multimeters
  • Lightweight at 400g for extended handheld use

Ideal For

  • Professional electricians working in commercial and industrial settings
  • Maintenance technicians measuring current in crowded panels
  • Electrical engineers verifying loads on busbars and feeders
  • HVAC and motor service technicians troubleshooting equipment
  • Users of UNI-T UT206B or UT208B multimeters needing a flex clamp

Buying Tip

Confirm that your multimeter is a UNI-T UT206B or UT208B, as the UT-CS09D is designed to display current directly with these models.

Elecvora expert review

Our verdict

The UNI-T UT-CS09D is a practical solution for electricians who need to measure high AC currents in locations that are difficult to access with traditional clamp meters. Its flexible Rogowski coil design and direct compatibility with UT206B and UT208B multimeters make it a useful addition to a professional toolkit.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Flexible loop reaches conductors in tight spaces
  • Wide current range up to 3000A AC
  • Lightweight and portable at 400g
  • Direct reading with compatible UNI-T multimeters

Cons

  • Requires a compatible UNI-T multimeter for direct display
  • Limited to AC current measurement only
  • Operating temperature range capped at 50°C

Best for

Electricians and technicians using UNI-T UT206B or UT208B meters who need to measure AC current in confined spaces

Not ideal for

Users without a compatible UNI-T multimeter or those needing DC current measurement

Specifications

Item TypeCurrent Sensor
Model No. / NameUT CS09D
Operating Temperature (°C)0-50
AC Current(A)30/300/3000
Frequency Response45Hz~500Hz
Length (mm)280
Width (mm)130
Weight (g)400
Shipping Weight0.416 kg
Shipping Dimensions38 × 19 × 5 cm

What's in the box

  • 1 x UT-CS09D Flex Clamp Current Sensor
  • 1 x BNC adapter
  • 1 x English manual

Frequently Asked Questions

What multimeters is the UT-CS09D compatible with?
The UT-CS09D is designed to display current directly when connected to UNI-T UT206B or UT208B multimeters. Other meters may require additional adapters or may not be compatible.
Can the UT-CS09D measure DC current?
No, the UT-CS09D is specified for AC current measurement only, with ranges of 30A, 300A and 3000A.
What is the maximum current the sensor can measure?
The highest AC current range is 3000A, allowing measurement of high-current conductors.
What is included in the package?
The package includes the UT-CS09D flex clamp current sensor, a BNC adapter and an English manual.
What is the operating temperature range?
The sensor is rated for operation between 0°C and 50°C.
How should I care for the flexible sensor?
Avoid sharp bends or excessive force on the flexible loop, and store the sensor in a dry place within the specified temperature range. Refer to the manual for detailed care instructions.

Overview

The UNI-T UT-CS09D is a flex clamp current sensor built for electrical professionals who need to measure AC current where conventional rigid clamps cannot fit. Its Rogowski coil design uses a flexible sensing loop that can be bent around cables, busbars and other conductors in confined or irregular spaces. With a length of 280mm and a weight of 400g, the sensor is manageable for handheld work in panels, cabinets and machinery.

The UT-CS09D is intended for use with compatible UNI-T multimeters, specifically the UT206B and UT208B, which can display current readings directly when connected. This makes it a practical accessory for electricians and technicians already using those meters.

Key Features

  • Flexible sensing loop: The Rogowski coil design allows the clamp to bend and wrap around conductors that are difficult to reach with fixed-jaw clamps.
  • Wide current coverage: Three AC current ranges (30A, 300A and 3000A) support everything from low-current branch circuits to high-current distribution feeders.
  • Frequency response: The 45Hz to 500Hz range covers standard mains frequencies and common harmonics found in industrial environments.
  • Direct reading with compatible meters: When paired with the UT206B or UT208B, the measured current is shown on the multimeter display, simplifying the measurement workflow.
  • Portable form factor: At 400g and 280mm long, the sensor is easy to carry and position during inspections and troubleshooting.

Specifications Explained

AC current ranges (30A / 300A / 3000A): The three ranges let you choose the scale that best matches the conductor being measured. The 30A range is useful for small loads, while the 3000A range handles high-current feeders and main distribution circuits.

Frequency response (45Hz to 500Hz): This indicates the sensor is designed for AC measurements within that band, covering typical 50Hz and 60Hz power systems and their lower-order harmonics.

Operating temperature (0–50°C): The sensor is rated for use in ambient temperatures from 0°C to 50°C, which covers most indoor electrical work environments.

Dimensions and weight: The 280mm length and 130mm width give the flexible loop enough reach for many conductor arrangements, while the 400g weight keeps it comfortable to hold during extended use.

Compatibility and Requirements

The UT-CS09D is designed to work with UNI-T UT206B and UT208B multimeters for direct current display. A BNC adapter is included to facilitate connection. No other compatibility details are specified in the product data, so users should confirm suitability with their existing test equipment before purchase.

Typical Uses

  • Measuring current in crowded electrical panels and distribution boards
  • Checking load current on busbars and thick cables
  • Troubleshooting motors, HVAC equipment and industrial machinery
  • Verifying circuit loading during inspections and maintenance
  • Working in tight ceiling voids or cable trays where rigid clamps cannot fit

What's in the Box

  • 1 x UT-CS09D Flex Clamp Current Sensor
  • 1 x BNC adapter
  • 1 x English manual

Quick specs

Item Type
Current Sensor
Model No. / Name
UT CS09D
Operating Temperature (°C)
0-50
AC Current(A)
30/300/3000
Frequency Response
45Hz~500Hz
Length (mm)
280
See all specifications