
1 / 4 · Click to enlarge
AI Summary
This pre-assembled shield adds a 2.8-inch 320x240 resistive touchscreen to Arduino boards via SPI, with an onboard touch controller and microSD slot. It requires no wiring or soldering, so you can plug it in and start coding a graphical interface right away.
Key Highlights
- 2.8-inch TFT LCD with 320x240 pixel resolution
- Resistive touchscreen with dedicated onboard controller
- ST7789 controller driven over SPI for minimal pin usage
- MicroSD card slot for storing and displaying images
- Programmable backlight for lower power consumption
- Pre-assembled shield, no soldering or wiring needed
Ideal For
- Arduino hobbyists adding a touchscreen to UNO projects
- Students learning embedded graphics and touch input
- Makers building menu-driven sensor displays
- Educators creating interactive hardware workshops
Buying Tip
Check that your Arduino board uses the standard header layout and that you have a microSD card if you plan to display images.
Elecvora expert review
Our verdict
This shield is a practical choice for anyone who wants to add a touchscreen to an Arduino project without complex wiring. It offers good display quality and reliable touch input for typical hobbyist applications.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Pre-assembled and easy to mount
- Onboard touch controller improves accuracy
- SPI interface saves pins
- MicroSD slot adds storage flexibility
Cons
- Resistive touch requires pressure and may not support multi-touch
- Limited compatibility with non-standard Arduino boards
- MicroSD card not included
Best for
Arduino UNO and compatible board users needing a simple touch display
Not ideal for
Projects requiring capacitive multi-touch or high-resolution graphics
Specifications
| Display Resolution (pixel) | 320×240 |
|---|---|
| Touch Type | Resistive |
| Controller | ST7789 |
| Interface Type | SPI |
| Length (mm) | 72 |
| Width (mm) | 55 |
| Weight (g) | 38 |
| Color | RGB, 65K colors |
| Shipping Weight | 0.055 kg |
| Shipping Dimensions | 8 × 7 × 3 cm |
What's in the box
- 1 x Waveshare 2.8inch Touch LCD Shield for Arduino
Frequently Asked Questions
Does this shield work with Arduino UNO?
Do I need to solder anything?
Can I use a microSD card with this shield?
What is the power requirement?
Is the touchscreen capacitive or resistive?
What is included in the package?
Overview
The Waveshare 2.8inch Touch LCD Shield is a ready-to-use display add-on for Arduino projects. It brings a 2.8-inch TFT screen with 320x240 pixel resolution and a resistive touch panel to your board without any soldering or loose wiring. The shield connects directly to the standard Arduino header, and because it communicates over SPI, only a few pins are occupied, leaving others free for sensors and other peripherals. An onboard touch controller handles finger input, and a microSD card slot lets you store images or data for display. The backlight can be adjusted in software, which helps reduce power consumption when full brightness is not needed.
Key Features
- 2.8-inch TFT display with 320x240 pixels and 65K colour output for clear graphics and text.
- Resistive touchscreen with a dedicated controller for reliable touch detection across the screen.
- ST7789 controller and SPI interface simplify connection and reduce pin usage.
- MicroSD slot provides an easy way to store photos and other files for display.
- Programmable backlight allows you to lower brightness and save power.
- Fully assembled shield requires no soldering or extra wiring.
Specifications Explained
The 320x240 pixel resolution gives you a sharp canvas for menus, graphs, and simple images. The resistive touch panel recognises presses from a finger or stylus, and the onboard controller improves accuracy compared to solutions that rely on analogue pins. The ST7789 controller is well supported by Arduino libraries, and the SPI interface means you only need a handful of digital pins. With 65K colours, the display can show smooth gradients and readable text. The shield measures 72 mm by 55 mm and weighs 38 g, so it adds little bulk to your project. The backlight is adjustable by program, which is useful for battery-powered builds.
Compatibility and Requirements
This shield is designed for classic Arduino boards with the standard header layout, such as the Arduino UNO and similar ATMEGA328-based boards. It also works with other development boards that expose the same Arduino interface, including the Leonardo, UNO PLUS, NUCLEO, and XNUCLEO. You will need a compatible Arduino board and a USB cable for programming. The shield draws power from the Arduino board, so no separate power supply is required for basic use. A microSD card is optional and not included.
Typical Uses
Use this shield to add a touch interface to home automation controllers, weather stations, or data loggers. It is also handy for educational projects that teach display graphics and touch input. Makers can build menu-driven devices, show sensor readings in real time, or display images from a microSD card. The compact size makes it suitable for handheld gadgets and custom enclosures.
What's in the Box
The package includes one Waveshare 2.8inch Touch LCD Shield for Arduino. No other accessories or cables are included.
Quick specs
- Display Resolution (pixel)
- 320×240
- Touch Type
- Resistive
- Controller
- ST7789
- Interface Type
- SPI
- Length (mm)
- 72
- Width (mm)
- 55



















