Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 6-in-1 sensor module that measures HCHO, TVOC, CO, IAQ, temperature, and humidity. It connects via UART to Raspberry Pi, Arduino, or ESP32 for real-time indoor air quality monitoring.

Key Highlights

  • Measures six parameters: HCHO, TVOC, CO, IAQ, temperature, humidity
  • Solid polymer electrochemical sensing for stable, low-drift readings
  • UART interface at 9600 bps for easy integration
  • Compatible with Raspberry Pi, Arduino, and ESP32
  • Compact 23 x 25.5 x 9.5 mm board with 2.0 mm mounting holes
  • Low operating current of 6.5 mA

Ideal For

  • Makers building indoor air quality monitors
  • Smart home enthusiasts integrating environmental sensors
  • Students and educators learning about gas sensing
  • IoT developers needing multi-parameter air data
  • Engineers prototyping HVAC or ventilation control

Buying Tip

Check that your project can supply 5V power and that your microcontroller uses 3.3V logic for the UART lines to avoid level shifting.

Elecvora expert review

Our verdict

The Waveshare Environment 6-in-1 Gas Sensor Module packs six useful air quality measurements into a tiny board with simple UART output. It is a practical choice for developers who need multi-parameter environmental data without complex wiring.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Six sensors in one compact module
  • Simple UART interface with fixed baud rate
  • Low power consumption for continuous operation
  • Wide compatibility with popular development boards

Cons

  • Requires a 5V supply, which may not be available on all 3.3V boards
  • Humidity must be above 15% RH for accurate readings
  • No onboard voltage regulation or level shifting

Best for

Makers and developers building indoor air quality monitoring systems

Not ideal for

Outdoor or industrial environments with extreme humidity or temperature beyond the specified range

Specifications

Shipping Weight0.015 kg
Shipping Dimensions7 × 5 × 1.7 cm

What's in the box

  • 1 x Waveshare Environment 6-in-1 Gas Sensor Module
  • 1 x MX1.25 4PIN cable, 200mm

Frequently Asked Questions

What gases and parameters does this module measure?
It measures formaldehyde (HCHO), total volatile organic compounds (TVOC), carbon monoxide (CO), indoor air quality index (IAQ), temperature, and humidity.
Which development boards are compatible?
The module is compatible with Raspberry Pi, Arduino, and ESP32 boards, as long as they support UART communication at 3.3V logic.
What power supply does the module require?
It requires a 5V supply for the sensor and uses 3.3V logic for UART. The operating current is 6.5 mA.
What is included in the package?
The package includes one Waveshare Environment 6-in-1 Gas Sensor Module and one MX1.25 4PIN cable, 200mm long.
How do I connect the module to my microcontroller?
Use the included MX1.25 cable to connect the module's UART TX and RX lines to your microcontroller's serial pins, and connect 5V and GND to a suitable power source.
What are the operating temperature and humidity ranges?
The module operates from -40°C to +55°C and requires a relative humidity above 15% RH.

Overview

The Waveshare Environment 6-in-1 Gas Sensor Module is a compact, integrated solution for monitoring indoor air quality. It combines detection of formaldehyde (HCHO), total volatile organic compounds (TVOC), carbon monoxide (CO), and an indoor air quality index (IAQ) with temperature and humidity sensing. The module uses solid polymer electrochemical technology, which helps maintain stable readings over time with minimal drift. Communication is handled through a UART interface, making it straightforward to connect to common development boards.

Key Features

  • Six-in-one detection: HCHO, TVOC, CO, IAQ, temperature, and humidity in a single module.
  • Solid polymer electrochemical sensing: Designed for reliable, low-drift performance.
  • UART interface: Fixed baud rate of 9600 bps for simple serial communication.
  • Wide compatibility: Works with Raspberry Pi, Arduino, and ESP32 platforms.
  • Compact and lightweight: Board measures 23 x 25.5 x 9.5 mm and weighs 3 g.
  • Low power consumption: Operates at 5V with a typical current of 6.5 mA.

Specifications Explained

Detected parameters: The module reports HCHO, TVOC, CO, IAQ, temperature, and humidity. HCHO and TVOC are common indicators of indoor pollution from furnishings and household products; CO is a colourless, odourless gas produced by incomplete combustion. The IAQ value gives a general air quality index based on the sensor readings.

Sensing technology: Solid polymer electrochemical sensors are used for gas detection. This technology is known for stable output and long service life compared to some other sensor types.

Operating voltage and logic: The module requires a 5V supply for the sensor and uses 3.3V logic levels for UART communication. This means it can connect directly to 3.3V microcontrollers without level shifting.

Resolution and range: Gas measurements have a resolution of 0.001 ppm. The operating temperature range is -40°C to +55°C, and the module requires a relative humidity above 15% RH for proper operation.

Communication: A UART interface at 9600 bps provides a simple way to read data using a serial terminal or microcontroller.

Compatibility and Requirements

The module is compatible with Raspberry Pi, Arduino, and ESP32 boards. It requires a 5V power supply and provides a UART interface at 9600 bps. A 200mm MX1.25 4-pin cable is included for connections. Mounting holes of 2.0 mm diameter allow secure installation.

Typical Uses

  • Indoor air quality monitoring in smart homes
  • Environmental data logging and analysis
  • Educational projects and sensor experimentation
  • Integration into IoT devices for air quality tracking
  • Workshop or office atmosphere monitoring

What's in the Box

  • 1 x Waveshare Environment 6-in-1 Gas Sensor Module
  • 1 x MX1.25 4PIN cable, 200mm

Quick specs

Shipping Weight
0.015 kg
Shipping Dimensions
7 × 5 × 1.7 cm
See all specifications