
1 / 4 · Click to enlarge
AI Summary
A compact MQ-3 alcohol gas sensor breakout with analog and digital outputs plus an adjustable threshold potentiometer. It works from 2.5 V to 5 V, making it easy to add ethanol detection to Arduino or Raspberry Pi projects.
Key Highlights
- Sensitive to alcohol and ethanol vapour in the surrounding air
- Analog output gives a voltage that rises with gas concentration
- Digital output with onboard potentiometer for adjustable threshold
- Wide 2.5 V to 5 V supply suits 3.3 V and 5 V boards
- Gold 2.54 mm pitch pins for breadboards and jumper wires
- Compact 40 x 21 mm board with 2 mm mounting holes
Ideal For
- Students and makers learning how gas sensors work
- Arduino and Raspberry Pi hobbyists adding ethanol detection
- Educators building breath-alcohol demonstration kits
- Makers designing buzzer-based vapour alert circuits
- Data logging enthusiasts recording analog sensor voltage
Buying Tip
Plan for a warm-up period and calibrate the potentiometer in the environment where the module will actually run, since temperature and humidity shift the baseline.
Elecvora expert review
Our verdict
A tidy, well-made breakout that turns a bare MQ-3 element into something you can wire up in minutes. The dual outputs and wide voltage range make it unusually easy to fit into both 3.3 V and 5 V projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Analog and digital outputs on one board
- Adjustable threshold via onboard potentiometer
- Works across 2.5 V to 5 V supplies
- Gold 2.54 mm pins and mounting holes
Cons
- Requires warm-up before readings settle
- Readings drift with temperature and humidity
- Digital threshold needs manual calibration
Best for
Makers and students adding ethanol detection to Arduino or Raspberry Pi projects
Not ideal for
Applications needing certified or calibrated alcohol measurement
Specifications
| Item Type | Gas Sensor |
|---|---|
| Operating Voltage (V) | 2.5 to 5 |
| Additional Specs. | Output Pin: Analog and digital, Gold pin connectors, 2.54 mm pitch, Boost Converter Chip: PT1301 |
| Board Size (mm) | 40 x 21 mm |
| Mounting Hole Diameter (mm) | 2 mm |
| Interface | Digital Output, Analog output, VCC Positive power supply (2.5V-5.0V), Power ground |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6 × 4 × 1 cm |
What's in the box
- 1 x MQ-3 Gas Sensor Module
- 1 x 4-pin custom connector jumper wire
Frequently Asked Questions
What is the difference between the A0 and D0 outputs?
Can I use this module with a Raspberry Pi?
What voltage does the module need?
How do I set the digital threshold?
What comes in the package?
Do readings need time to stabilise?
Overview
The Waveshare MQ-3 Alcohol Gas Sensor Module packages an MQ-3 sensing element on a small, ready-to-wire board. The sensor uses SnO2 as its gas-sensing material: in clean air its conductivity stays low, and as alcohol vapour concentration rises the conductivity increases. The board converts that behaviour into two usable signals, an analog voltage on A0 and a switched digital level on D0, so you can choose between measuring a value or simply triggering an event.
Key Features
- Dual outputs: analog A0 for proportional readings and digital D0 for a simple high/low signal.
- Adjustable threshold: a potentiometer on the reverse of the board sets the level at which D0 changes state.
- Flexible power: accepts anything from 2.5 V to 5 V, with a PT1301 boost converter chip on board.
- Easy connections: gold pin connectors at 2.54 mm pitch, plus a 4-pin connector jumper wire in the box.
- Mounting ready: 2 mm mounting holes on a 40 x 21 mm board.
Specifications Explained
The 2.5 V to 5 V operating range is the headline figure for most builders. It means the module can share a supply with 3.3 V logic devices as well as 5 V microcontrollers, and the onboard boost converter handles the sensing element's needs. The analog output is the input you want when you need to judge how much alcohol is present rather than just whether it is present, because the voltage moves in proportion to concentration. The digital output is the simpler option: set the potentiometer once, and D0 flips from high to low when your chosen level is crossed, which is ideal for driving a buzzer or an interrupt pin. The 2.54 mm gold pin pitch is the familiar breadboard and dupont spacing, and the 2 mm holes accept small screws or standoffs.
Compatibility and Requirements
The module is described as compatible with common development boards including Raspberry Pi and Arduino. You will need a 2.5 V to 5 V supply, a ground connection, and either an analog input pin or a digital input pin on your controller. The included 4-pin connector jumper wire covers the basic wiring. Note that the sensor needs a warm-up period before readings settle, and that its output is affected by temperature and humidity, so allow for that in your code and enclosure design.
Typical Uses
- Breath-alcohol detection experiments and educational demonstrations
- Ethanol vapour monitoring in small enclosed spaces
- Alert circuits using a buzzer driven from the digital output
- Data logging projects that record analog voltage over time
- Teaching how metal-oxide gas sensors respond to concentration
What's in the Box
One MQ-3 gas sensor module and one 4-pin custom connector jumper wire.
Quick specs
- Item Type
- Gas Sensor
- Operating Voltage (V)
- 2.5 to 5
- Additional Specs.
- Output Pin: Analog and digital, Gold pin connectors, 2.54 mm pitch, Boost Converter Chip: PT1301
- Board Size (mm)
- 40 x 21 mm
- Mounting Hole Diameter (mm)
- 2 mm
- Interface
- Digital Output, Analog output, VCC Positive power supply (2.5V-5.0V), Power ground
























