
1 / 3 · Click to enlarge
AI Summary
A compact UART gas sensor board that measures TVOC, CO2 and formaldehyde concentrations from 0.1ppm to 100ppm. It runs on 5V with a response time under 20 seconds, making air-quality data easy to read from Raspberry Pi, Arduino or ESP32 projects.
Key Highlights
- Detects TVOC, CO2 and formaldehyde concentrations in ambient air
- UART interface at 115200bps for straightforward serial readings
- Wide 0.1ppm to 100ppm detection range with under 20s response
- Low power draw of 60mA or less from a 5V supply
- Compact 27 x 20mm board weighing approximately 4g
- Development examples for Raspberry Pi, Pico, Arduino and ESP32
Ideal For
- Makers building indoor air-quality monitors with Arduino or ESP32
- Students learning UART sensor integration on Raspberry Pi or Pico
- Engineers prototyping environmental sensing nodes
- Educators assembling classroom gas-sensing demonstrations
- Home automation enthusiasts adding VOC data to dashboards
Buying Tip
Confirm your host board has a free UART port and a stable 5V rail before ordering, since the module communicates over serial rather than I2C or analog output.
Elecvora expert review
Our verdict
A tidy, low-cost module that turns air-quality sensing into a serial data problem, which is exactly what most microcontroller projects want. It is best treated as a relative trend sensor rather than a lab instrument.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple UART output at a standard 115200bps baud rate
- Fast response under 20 seconds
- Small 27 x 20mm board with low 60mA current draw
- Examples provided for Raspberry Pi, Pico, Arduino and ESP32
- Includes the SH1.0 6-pin cable needed to get started
Cons
- Requires a regulated 5V supply and a free UART port
- No onboard display or calibration controls
- Absolute accuracy is not specified, so trend use is more realistic
Best for
Makers and students adding VOC trend data to microcontroller projects
Not ideal for
Certified safety or laboratory-grade air monitoring
Specifications
| Item Type | Gas Sensor |
|---|---|
| Sensor Type | Gas Sensor |
| Operating Voltage (V) | 5 |
| Operating Temperature (°C) | -20℃~50℃ |
| Communication Interface | UART |
| Baud Rate (bps) | 115200bps |
| Response Time(s) | < 20 |
| Detection range | 0.1ppm~100ppm |
| Operating Current (mA) | ≤60 |
| Length (mm) | 27 |
| Width (mm) | 20 |
| Weight (g) | 04 |
| Shipping Weight | 0.006 kg |
| Shipping Dimensions | 3 × 3 × 3 cm |
What's in the box
- 1 x TVOC Sensor
- 1 x SH1.0 6PIN cable
Frequently Asked Questions
What gases does this sensor measure?
What voltage does the module need?
How do I read data from it?
Which development boards are supported?
What is included in the package?
What temperature range can it handle?
Overview
The Waveshare TVOC Gas Sensor is a small, ready-to-wire module for tracking Total Volatile Organic Compounds in the air around you. Beyond TVOC, it also reports CO2 and formaldehyde concentrations, giving a broader picture of indoor air quality from a single board. Readings are delivered over a UART link, so your microcontroller receives clean serial data instead of an analog voltage that needs calibration and filtering.
The module is built for people who want air-quality sensing inside an existing project: students learning embedded systems, makers building room monitors, and engineers evaluating sensor behaviour before committing to a design. Because the board is only 27 x 20mm and weighs about 4g, it disappears into handheld enclosures and compact sensor nodes.
Key Features
- Multi-gas awareness: measures TVOC, CO2 and CH2O concentrations in the surrounding environment.
- UART output: communicates at 115200bps for simple serial parsing.
- Fast response: readings settle in under 20 seconds.
- Wide detection window: covers 0.1ppm to 100ppm.
- Efficient operation: draws 60mA or less at 5V.
- Compact footprint: 27mm long, 20mm wide, roughly 4g.
Specifications Explained
Detection range and response time
The 0.1ppm to 100ppm range covers the low concentrations typical of normal indoor air as well as the higher levels found near fresh paint, solvents or new furniture. A response time under 20 seconds means your display or data logger updates quickly enough to react to changes rather than lagging behind them.
Power and interface
A 5V supply with a current draw of 60mA or less keeps wiring simple: the module can share the same rail as most development boards. UART at 115200bps is a standard baud rate supported by virtually every microcontroller, so no special libraries are needed to open the serial port.
Operating conditions
The sensor is rated for -20°C to 50°C, which suits indoor rooms, workshops, greenhouses and most sheltered enclosures. Keep it away from condensing moisture and direct contact with liquids.
Compatibility and Requirements
You need a host board with a free UART port and a regulated 5V supply. Waveshare provides online development resources and a manual with examples for Raspberry Pi, Raspberry Pi Pico, Arduino and ESP32. A SH1.0 6-pin cable is included, so the module connects directly to a matching header without soldering.
Typical Uses
- Indoor air-quality monitors for homes, offices and classrooms
- Data logging projects that chart VOC levels over time
- Educational kits demonstrating gas sensing and serial communication
- Prototype environmental nodes for smart-building experiments
- Enclosure-mounted air checks near paints, adhesives and cleaning products
What's in the Box
- 1 x TVOC Sensor board
- 1 x SH1.0 6-pin cable

Quick specs
- Item Type
- Gas Sensor
- Sensor Type
- Gas Sensor
- Operating Voltage (V)
- 5
- Operating Temperature (°C)
- -20℃~50℃
- Communication Interface
- UART
- Baud Rate (bps)
- 115200bps



















