Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by YAANENDRIYA, this generic sensor module is a good fit for makers, students and electronics hobbyists. Main specs: sensor type Strain Gauge Based Load Cell; weight (g) 14; i/o pin voltage 3.18 to 3.42 V. Check that your power source supplies 3.18 to 3.42 V before connecting it.

Key Highlights

  • Sensor Type: Strain Gauge Based Load Cell
  • Weight (g): 14
  • I/O pin voltage: 3.18 to 3.42 V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Sensor TypeStrain Gauge Based Load Cell
Weight (g)14
I/O pin voltage3.18 to 3.42 V
Operating Voltage (V)2.7~5.5
Max. output200 Hz
Dimensions (L x W x H) mm170 x 130 x 130
Avg. Current Consumption60 mA
InstallationTool-Free, Easy Replacement
Supply Voltage4.60 to 5.40 V
Peak Current (mA)100
Operating Temperature (°C)−10 to +60
Shipping Weight0.136 kg
Shipping Dimensions14 × 11 × 4 cm

Overview

The Yaanendriya YDx M CB-1-E 6-DoF VRU and IMU Module, made by YAANENDRIYA, is listed in our generic sensor module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Sensor Type: Strain Gauge Based Load Cell
  • Weight (g): 14 (important for drones, RC models and anything you carry)
  • I/O pin voltage: 3.18 to 3.42 V (match this to your power supply; too high a voltage can damage the part)
  • Operating Voltage (V): 2.7~5.5 (match this to your power supply; too high a voltage can damage the part)
  • Max. output: 200 Hz (make sure the rest of your system works at this frequency)
  • Dimensions (L x W x H) mm: 170 x 130 x 130 (measure your mounting space before ordering)
  • Avg. Current Consumption: 60 mA (your supply must deliver at least this much current)
  • Installation: Tool-Free, Easy Replacement

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The YDx-M CB-1-E is a compact and robust 6-DoF VRU and IMU module designed for highly stable roll and pitch estimation in static and low-dynamic applications. Powered by a 3-axis accelerometer and 3-axis gyroscope, it uses Yaanendriya’s YSS Fusion algorithm to deliver consistent, drift-managed orientation outputs.

Built for industrial-grade leveling and alignment tasks, this module offers fast startup, low latency, and configurable output rates up to 200 Hz. Each unit is factory calibrated and tested for reliable performance, making integration simple through available SDKs and multi-protocol communication support (UART, CAN, SPI, I2C).

Ideal for machine leveling, construction alignment, robotics mounting systems, and consumer stabilization setups, the CB-1-E ensures precise orientation feedback in a lightweight, compact form factor.


Features:

  1. 6-DoF VRU & IMU with advanced sensor fusion (YSS Fusion)
  2. High-stability static roll/pitch estimation for leveling applications
  3. Multi-protocol communication: UART, CAN, SPI, I2C
  4. Factory calibrated for consistent, low-drift performance
  5. Compact, lightweight design for embedded and portable systems
  6. Configurable output up to 200 Hz with low latency response

Applications:
  1. Robotics & Automation (AGVs, AMRs, robotic arms) for precise orientation and leveling control
  2. UAVs, drones, and aerospace systems for stable flight attitude estimation
  3. Industrial monitoring and machine health for equipment base and structural alignment checks
  4. Automotive dynamics and navigation research for motion tracking and stability analysis
  5. VR/AR motion tracking and posture analysis for accurate orientation sensing
  6. Defense and unmanned systems for robust inertial navigation and stabilization
  7. Smart agriculture and heavy machinery for terrain leveling and equipment positioning
  8. Research and prototyping for IMU-based motion sensing and fusion algorithm development

Package Includes:

1 x  Yaanendriya YDx M CB-1-E 6-DoF VRU and IMU Module 4 x Connecting Pin

Quick specs

Sensor Type
Strain Gauge Based Load Cell
Weight (g)
14
I/O pin voltage
3.18 to 3.42 V
Operating Voltage (V)
2.7~5.5
Max. output
200 Hz
Dimensions (L x W x H) mm
170 x 130 x 130
See all specifications