Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The YALU MY1016Z2 is a 24V 250W geared brushed motor delivering 360 RPM output and 8.15 kg-cm torque. Its integrated 9.78:1 reduction makes it a practical choice for e-bike, scooter and DIY builds.

Key Highlights

  • 24V 250W brushed motor with integrated gearbox
  • 360 RPM output speed and 8.15 kg-cm rated torque
  • 9.78:1 gear reduction for strong low-end pull
  • Compact 170 x 120 mm body weighs about 2.35 kg
  • Common mounting block simplifies replacement
  • 0.5 m cable for flexible wiring

Ideal For

  • E-bike builders looking for a compact geared motor
  • DIY scooter and kart enthusiasts
  • Robotics hobbyists building combat or ATV robots
  • Makers creating small electric vehicles

Buying Tip

Confirm whether you need the version with or without the mounting base plate before ordering, as stock availability determines which one is shipped.

Elecvora expert review

Our verdict

The YALU MY1016Z2 is a dependable geared brushed motor that offers a good balance of speed and torque for small electric vehicles. Its integrated gearbox and common mounting pattern make it a practical choice for both replacements and new builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated gearbox provides useful torque at low speeds
  • Compact and relatively lightweight
  • Simple wiring with only two motor leads
  • Common mounting block simplifies installation

Cons

  • Brushed design requires periodic brush maintenance
  • Only rated for 24V operation
  • Does not include controller, throttle or battery

Best for

DIY e-bike, scooter and robotics projects

Not ideal for

High-speed or high-power applications

Specifications

Item TypeEbike Motor
Motor TypeBrushed motor
Rated Current (A)2.2
Rated Voltage (VDC)24
Rated Speed (RPM)360
Gear Ratio9.78:1
Rated Torque (kg-cm)8.15
Min. Reduction Ratio9.78
GearboxYes
Cable Length0.5
Dimensions (L x W x H) mm170mm x 120mm
Weight (g)2350
Shipping Weight2.4 kg
Shipping Dimensions22 × 15 × 12 cm

What's in the box

  • 1 x YALU MY1016Z2 250W 360RPM geared DC motor

Frequently Asked Questions

What controller should I use with this motor?
Use a brushed DC motor controller rated for 24V and at least 2.2A continuous current. A compatible controller designed for e-bikes is recommended.
Can I run this motor at 36V or 48V?
No, this motor is rated for 24V only. Using a higher voltage may cause overheating and damage the motor.
Does the motor come with a mounting bracket?
The motor is available in two versions: with a mounting base plate and without. The version shipped depends on stock availability, so please check before ordering.
What is the output speed of this motor?
The output speed after the gearbox is 360 RPM. The sticker may show 3300 RPM, which is the motor speed before reduction.
Is this motor suitable for a heavy adult e-bike?
This motor is best suited for lightweight vehicles and projects. For heavier riders or cargo bikes, a more powerful motor may be needed.
What is included in the package?
The package includes one YALU MY1016Z2 250W 360RPM geared DC motor. Controller, throttle, battery and mounting hardware are not included.

Overview

The YALU MY1016Z2 is a geared brushed DC motor designed for small electric vehicles and DIY projects. It operates at 24V and draws a rated current of 2.2A while producing 250W of mechanical power. The built-in gearbox reduces the motor's internal speed to a 360 RPM output, which is well suited to wheel sizes commonly found on e-bikes, scooters and small carts. With a rated torque of 8.15 kg-cm, it offers useful pulling force for its size.

Key Features

  • Geared reduction: The 9.78:1 ratio converts higher motor RPM into lower output speed with increased torque.
  • Brushed design: Simple two-wire connection and straightforward speed control with a compatible brushed controller.
  • Compact and lightweight: Measures 170 x 120 mm and weighs approximately 2.35 kg, making it easy to fit on many frames.
  • Common mounting block: The motor uses a widely recognised mounting pattern, so swapping out a worn unit is quick.
  • 0.5 m cable: Provides enough length for most installations without excess wiring.

Specifications Explained

24V rated voltage: This motor is intended for 24V battery systems. Using a higher voltage will increase speed and current draw, which may damage the motor and is not recommended without careful consideration.

250W rated power: This is the continuous power the motor can handle under normal conditions. It provides modest but reliable performance for lightweight vehicles and projects.

360 RPM output speed: After the gearbox, the output shaft turns at 360 RPM. This is the speed you will use to calculate the vehicle's top speed based on wheel size and gearing.

8.15 kg-cm rated torque: This indicates the turning force available at the output shaft. Higher torque helps with acceleration and climbing small inclines.

9.78:1 gear ratio: The gearbox multiplies torque by roughly 9.78 times while reducing speed by the same factor. This is the minimum reduction ratio of the gearbox.

2.2A rated current: The motor draws about 2.2A at rated load. Ensure your controller and battery can supply this current continuously.

Compatibility and Requirements

This motor requires a compatible brushed motor controller and a 24V battery pack. It does not include a controller, throttle, battery or mounting hardware. The 0.5 m cable must be connected to the controller, and the motor should be securely mounted using the appropriate bracket or mounting block. The motor is available in two versions: with a mounting base plate and without. The version shipped depends on stock availability.

Typical Uses

This motor is commonly used in e-bike conversions, electric scooters, quad bikes and small karts. It is also popular in DIY robotics such as combat robots, ATV robots and self-balancing projects. Its size and power make it suitable for lightweight applications and educational builds.

What's in the Box

1 x YALU MY1016Z2 250W 360RPM geared DC motor.

Quick specs

Item Type
Ebike Motor
Motor Type
Brushed motor
Rated Current (A)
2.2
Rated Voltage (VDC)
24
Rated Speed (RPM)
360
Gear Ratio
9.78:1
See all specifications