
1 / 3 · Click to enlarge
AI Summary
A 3-pin female housing connector with a 4.2mm pitch, supplied with a 300mm length of 22 AWG wire already attached. It saves crimping time for power and signal wiring in prototypes, repairs and DIY electronics.
Key Highlights
- 3-pin female housing with 4.2mm pitch spacing
- 300mm pre-attached 22 AWG wire
- Insulation resistance of at least 10 MΩ
- Ready-made cable assembly saves crimping time
- Compact and lightweight for tight enclosures
- Suitable for power and signal connections
Ideal For
- Electronics hobbyists building prototypes
- Makers working on DIY projects
- Technicians repairing electronic devices
- Students learning about connectors and wiring
- Anyone needing a pre-wired 3-pin connector
Buying Tip
Confirm your mating header has a 4.2mm pitch and 3 pins before ordering, as this connector will not fit other pin spacings.
Elecvora expert review
Our verdict
A handy pre-wired connector that saves crimping time and suits low-current projects. It is a straightforward part, but check pitch and current requirements before buying.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Pre-attached wire saves assembly time
- Clear 4.2mm pitch specification
- Good insulation resistance for signal integrity
- Compact and lightweight
Cons
- Wire ends are not terminated
- Mating connector not included
- 22 AWG limits current capacity
Best for
Prototyping and low-current power or signal wiring
Not ideal for
High-current power applications or systems requiring a different pitch
Specifications
| Manufacturer | ZGWD |
|---|---|
| Pitch Spacing (mm) | 4.2 |
| No. of Pins | 3 |
| Wire Length(mm) | 300 |
| Allowed Wire Size (AWG) | 22 |
| Gender | Female |
| Insulation Resistance (MOhm) | ≥ 10MΩ |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x ZGWD 5569-03Y 3-pin female housing connector with 300mm 22 AWG wire
Frequently Asked Questions
What is the pitch of this connector?
How many pins does it have?
What length and gauge is the wire?
Is a mating connector included?
What is the insulation resistance?
Are the wire ends pre-stripped or tinned?
Overview
The ZGWD 5569-03Y is a 3-pin female housing connector supplied with a 300mm length of 22 AWG wire already attached. It uses a 4.2mm pitch, meaning the centres of adjacent pins are 4.2mm apart. This pre-assembled format removes the need to source separate terminals and crimp them yourself, which makes it a practical building block for power and signal wiring in electronic devices.
Key Features
- 3-pin female housing: a compact connector body for three-conductor connections.
- 4.2mm pitch: consistent pin spacing for mating with compatible headers.
- 300mm wire length: enough reach for most internal wiring runs.
- 22 AWG wire: a common gauge for low-current power and signal lines.
- Insulation resistance ≥10 MΩ: helps limit leakage between conductors.
Specifications Explained
Pitch (4.2mm): this is the distance between pin centres. Matching it to your header or mating connector is essential for a correct fit. Pin count (3): three conductors are often enough for a positive, negative and signal line, or for a small multi-wire bus. Wire length (300mm): the attached lead gives flexibility when routing inside an enclosure without needing extension wires. Wire size (22 AWG): this gauge is typically used for low-current connections; check that your project's current draw is appropriate for the wire. Insulation resistance (≥10 MΩ): a measure of how well the insulation resists current leakage, useful for signal integrity in low-power circuits.
Compatibility and Requirements
This is a female housing connector with a 4.2mm pitch and 3 pins. It is intended to mate with a compatible male header or connector of the same pitch and pin count. The free ends of the 22 AWG wires are not terminated, so you will need to solder, crimp or otherwise connect them to your circuit. No mating connector or additional hardware is included.
Typical Uses
- Power connections inside electronic devices
- Signal wiring between boards and modules
- Prototyping and DIY electronics projects
- Repair or replacement of existing cable assemblies
- Test leads and bench setups
What's in the Box
1 x ZGWD 5569-03Y 3-pin female housing connector with 300mm 22 AWG wire.
Quick specs
- Manufacturer
- ZGWD
- Pitch Spacing (mm)
- 4.2
- No. of Pins
- 3
- Wire Length(mm)
- 300
- Allowed Wire Size (AWG)
- 22
- Gender
- Female



















