Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 4-pin male vertical wire-to-board connector with 2.5mm pitch and a K-type buckle latch, rated 3.0A at 1000V. The buckle housing keeps the mated halves locked in place on PCBs and wire harnesses.

Key Highlights

  • 4-pin male connector with 2.5mm pin pitch
  • Vertical mounting orientation for compact board layouts
  • K-type buckle latch resists vibration and pull-out
  • 3.0A current rating and 1000V voltage rating
  • Insulation resistance of at least 1000MΩ
  • Operates from -25°C to +85°C

Ideal For

  • Electronics hobbyists building or repairing PCBs
  • Technicians assembling wire harnesses
  • Small-batch product developers specifying board connectors
  • Makers replacing a damaged 2.5mm pitch connector
  • Anyone needing a latched 4-pin wire-to-board link

Buying Tip

Confirm your PCB footprint and mating female half use a 2.5mm pitch, 4-pin K-type layout before ordering, since this listing is for the male connector only.

Elecvora expert review

Our verdict

A tidy, well-specified 4-pin WTB connector that covers the essentials: 2.5mm pitch, a latched buckle housing and sensible electrical ratings. It suits compact boards where a secure wire link matters more than high current.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Buckle latch helps prevent accidental disconnection
  • 3.0A and 1000V ratings suit many low-voltage builds
  • Vertical body keeps the PCB footprint compact
  • Wide -25°C to +85°C operating range
  • High insulation resistance of at least 1000MΩ

Cons

  • Male half only; mating female connector is not included
  • No datasheet drawing supplied for footprint verification
  • Not intended for currents above the 3.0A rating

Best for

Compact PCB and wire harness assemblies needing a latched 4-pin link

Not ideal for

High-current power distribution or unlatched quick-disconnect setups

Specifications

ManufacturerZGWD
No. of Pins4
Operating Temperature (°C)-25°C ~+85°C
Current Rating (A)3.0A
Insulation Resistance (MOhm)≥1000MΩ
Voltage Rating (V)1000V
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x HA-04AB 2.5mm 4-pin male vertical K-type buckle WTB connector

Frequently Asked Questions

What is a WTB connector used for?
WTB stands for wire-to-board. It joins a wire harness to a PCB, letting you connect and disconnect a cable assembly without soldering directly to the board each time.
Does this include the female mating half?
No. The package contains one male HA-04AB connector only. You will need a compatible female housing with the same 2.5mm pitch, 4-pin layout and K-type buckle.
What current and voltage can it handle?
The connector is rated at 3.0A and 1000V, with insulation resistance of at least 1000MΩ. Keep your circuit within those figures.
What temperature range does it support?
It is specified for operation from -25°C to +85°C, which covers most indoor and enclosed electronics applications.
How do I know it fits my PCB?
Measure the pad spacing on your board and confirm it matches the 2.5mm pitch and 4-pin single-row layout. Also check that the vertical body clears nearby components.
How should I store and handle it?
Keep it in a dry place away from heat, and avoid bending the pins, since a distorted pin can prevent proper mating.

Overview

The ZGWD HA-04AB is a 4-pin male wire-to-board (WTB) connector with a 2.5mm pitch, a vertical mounting orientation and a K-type buckle housing. It is designed to join a wire harness to a PCB footprint, with the buckle latch holding the mating halves together once engaged. The part is small, light and straightforward to handle, making it suitable for both prototype work and production assembly.

Key Features

  • 2.5mm pitch: a common board-to-wire spacing that suits many compact PCB layouts.
  • 4 male pins: a single row of four contacts for multi-signal or power-plus-signal links.
  • Vertical orientation: the connector stands upright on the board, keeping the footprint tight.
  • K-type buckle: a latch design that helps prevent accidental separation.
  • Electrical headroom: rated 3.0A and 1000V with insulation resistance of at least 1000MΩ.

Specifications Explained

Current and voltage ratings

The 3.0A current rating tells you how much current the connector is intended to carry in normal use, so keep your circuit's draw within that figure. The 1000V voltage rating describes the insulation's working limit, giving useful margin in low-voltage electronics projects.

Insulation resistance

An insulation resistance of at least 1000MΩ indicates that the housing and contact spacing are designed to limit leakage between conductors, which matters when signals are sensitive or when the connector sits in a damp environment.

Temperature range

The -25°C to +85°C operating range covers typical indoor electronics, enclosed equipment and most hobby builds. Avoid sustained operation outside that window.

Pitch and orientation

Pitch is the centre-to-centre distance between adjacent pins, here 2.5mm. Always match pitch and pin count to the mating part and PCB footprint. The vertical orientation means the connector rises from the board rather than sitting parallel to it.

Compatibility and Requirements

This is a male connector, so it requires a compatible female mating half with the same 2.5mm pitch, 4-pin layout and K-type buckle design. The PCB footprint must match the pin spacing and body orientation. No cable, mating connector or mounting hardware is supplied, so plan those parts before assembly.

Typical Uses

  • Wire-to-board links inside electronic assemblies
  • PCB prototyping and small-batch production
  • Wire harness construction and repair
  • Signal and low-current power connections in enclosures
  • Replacement of a worn or damaged connector of the same type

What's in the Box

One HA-04AB 2.5mm 4-pin male vertical K-type buckle WTB connector.

Quick specs

Manufacturer
ZGWD
No. of Pins
4
Operating Temperature (°C)
-25°C ~+85°C
Current Rating (A)
3.0A
Insulation Resistance (MOhm)
≥1000MΩ
Voltage Rating (V)
1000V
See all specifications