
1 / 3 · Click to enlarge
AI Summary
A 5-pin female housing connector on a 2.00mm pitch, supplied with a 300mm length of 28 AWG wire already attached. It saves crimping time and gives compact, multi-signal wiring in tight electronic builds.
Key Highlights
- 5-pin female housing on a compact 2.00mm pitch
- 300mm wire lead already attached for faster assembly
- 28 AWG wire suits low-current signal and supply runs
- Secure, keyed fit for stable electronic connections
- Lightweight part at just 0.001 kg shipping weight
- Simple to plug in and disconnect during servicing
Ideal For
- Drone and FPV builders wiring compact internal harnesses
- RC hobbyists replacing damaged connector leads
- Electronics repair technicians servicing small devices
- Product developers prototyping multi-signal connections
- Makers working on space-constrained gadget builds
Buying Tip
Confirm that your mating part uses a 2.00mm pitch and a 5-pin female-to-male arrangement before ordering, since the housing only fits a matching connector.
Elecvora expert review
Our verdict
A tidy, no-fuss connector lead that removes the fiddliest part of small-pitch wiring: crimping. It is a sensible spare to keep on the bench for compact drone, RC and gadget builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wire already attached, so no crimping tools needed
- Compact 2.00mm pitch suits tight layouts
- Five pins cover several signals in one plug
- Very light, adding negligible weight
- Simple to plug and unplug for servicing
Cons
- Only one connector lead is included per unit
- Free wire end still needs soldering or termination
- No voltage or current rating is stated in the listed data
Best for
Compact multi-pin internal wiring in drones, RC models and small electronics
Not ideal for
High-power or high-current connections where a rated connector is required
Specifications
| Manufacturer | ZGWD |
|---|---|
| Pitch Spacing (mm) | 2 |
| No. of Pins | 5 |
| Gender | Female |
| Allowed Wire Size (AWG) | 28 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x PAE-05Y 2.00mm 5-pin female housing connector with 300mm 28 AWG wire
Frequently Asked Questions
What is the pitch of this connector?
How many pins does it have?
What wire is attached?
What is included when I order?
Can I connect it directly to a board?
Where can I find more technical detail?
Overview
The ZGWD PAE-05Y is a female housing connector with five contacts spaced on a 2.00mm pitch. It arrives with a 300mm length of 28 AWG wire already attached, so the lead is ready to route rather than waiting on a separate crimping step. The part is identified by the manufacturer part number PAE-05Y and is aimed at compact electronic assemblies where several signals need to travel through one small plug.
Because the housing is female, it accepts a matching male header or plug and holds the connection with a keyed fit. That makes it a practical choice for builds that are assembled, tested and then serviced repeatedly.
Key Features
- Five contacts, one plug: route multiple lines through a single compact connector.
- 2.00mm pitch: a narrow contact spacing that suits space-constrained boards and harnesses.
- Pre-attached 300mm wire: saves crimping time and reduces handling of small terminals.
- 28 AWG conductor: flexible, lightweight wire for low-current signal and supply connections.
- Female housing: receives a mating male connector for a secure, repeatable fit.
- Lightweight: shipping weight of just 0.001 kg, so it adds almost nothing to a build.
Specifications Explained
Pitch (2.00mm) is the centre-to-centre distance between adjacent contacts. It sets the width of the connector footprint and must match the mating part, so confirm your board or plug uses the same 2.00mm spacing before ordering.
Pin count (5) tells you how many separate conductors the housing carries. Each pin is an independent line, which is useful when a device needs several signals plus a supply and ground run.
Wire size (28 AWG) describes the conductor gauge. 28 AWG is thin and flexible, well suited to low-current wiring inside small enclosures and lightweight models.
Wire length (300mm) gives roughly 30cm of reach between the connector and the point where you terminate the free end, which is enough for most short internal runs.
Compatibility and Requirements
This connector mates with a corresponding male connector on the same 2.00mm pitch and 5-pin layout. The free end of the wire still needs to be terminated or soldered to your circuit, and the connector itself is a passive part with no voltage rating or current rating stated in the supplied data. Check your own circuit requirements and refer to the datasheet in the attachment section for further technical detail before use.
Typical Uses
The PAE-05Y suits internal wiring in drones, RC models and FPV equipment, small tool and gadget assemblies, and general electronics prototyping where a short multi-pin lead is needed. It is also handy for repairs where an original connector lead has been damaged and a like-for-like replacement is required.
What's in the Box
- 1 x PAE-05Y 2.00mm 5-pin female housing connector with 300mm 28 AWG wire
Quick specs
- Manufacturer
- ZGWD
- Pitch Spacing (mm)
- 2
- No. of Pins
- 5
- Gender
- Female
- Allowed Wire Size (AWG)
- 28
- Shipping Weight
- 0.001 kg



















