
1 / 3 · Click to enlarge
AI Summary
This 0.56-inch red 4-digit 7-segment LED display features a common cathode configuration and 12 pins for easy breadboard or PCB mounting. Its 14mm digits and 10mA operating current make it a practical choice for clocks, counters, and embedded readouts.
Key Highlights
- Bright red 4-digit 7-segment display with 14mm digit height
- Common cathode configuration for simplified wiring
- 12 pins for breadboard and PCB mounting
- Low 10mA operating current per segment
- 640nm wavelength for clear red illumination
- Compact size ideal for clocks and numeric panels
Ideal For
- Electronics hobbyists building digital clocks
- Students learning multiplexing and display driving
- Makers creating custom scoreboards or counters
- Product designers needing a compact numeric readout
- DIY enthusiasts adding a panel meter to equipment
Buying Tip
Remember to use current-limiting resistors on each segment and consider a driver IC for multiplexing to avoid damaging your microcontroller.
Elecvora expert review
Our verdict
This 4-digit 7-segment display offers a straightforward way to add a bright red numeric readout to your projects. Its common cathode design and standard 12-pin layout make it easy to integrate with common microcontrollers.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 14mm red digits with good visibility
- Low 10mA current per segment
- Standard 12-pin breadboard-friendly layout
- Common cathode simplifies driving with NPN transistors
Cons
- Requires external current-limiting resistors
- Multiplexing adds wiring complexity
- No datasheet included, pinout must be looked up
Best for
DIY electronics projects needing a compact numeric display
Not ideal for
Outdoor use in direct sunlight where higher brightness is needed
Specifications
| Model No. / Name | 7 Segment LED Display |
|---|---|
| No. of Pins | 12 |
| Display Type | Seven Segments |
| Configuration | Common Cathode |
| Color | Red |
| No. of Digits | 4 Digits |
| Digit Height | 14mm |
| Operating Current (mA) | 10 |
| Wavelength | 640nm |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6 × 4 × 3 cm |
What's in the box
- 1 x 0.56-inch red 4-digit 7-segment LED display (common cathode, 12-pin)
Frequently Asked Questions
What does common cathode mean?
How many pins does this display have?
What is the operating voltage?
Can I use this display with an Arduino?
Is a datasheet included?
How do I care for this display?
Overview
The 0.56-inch red 4-digit 7-segment LED display is a compact numeric readout module designed for electronics projects that need clear, bright digits. It uses a common cathode configuration, meaning all LED cathodes are tied together, which simplifies wiring when switching segments with NPN transistors or direct microcontroller pins. With 12 pins and a 14mm digit height, it fits neatly into breadboards and custom PCBs, making it a versatile choice for hobbyists and product designers alike.
Key Features
- Four red digits: Shows numbers up to 9999, ideal for time, counters, and measurements.
- Common cathode: Compatible with many driver ICs and microcontroller setups.
- 12-pin package: Standard 0.1-inch pitch for easy prototyping.
- Low current draw: 10mA typical operating current per segment helps extend battery life.
- 640nm wavelength: Produces a vivid red color that is easy to read indoors.
Specifications Explained
Digit height (14mm): The 0.56-inch character height offers a good balance between visibility and compactness, suitable for handheld devices and panel meters. Common cathode: This means the negative terminals of all segments are connected together, so you apply positive voltage to the segment you want to light. It is often preferred when using shift registers or multiplexing with NPN transistors. Operating current (10mA): Each segment draws about 10mA, so a 4-digit display with all segments on could draw up to 80mA (8 segments × 10mA), but multiplexing reduces average current. 12 pins: The pins include 8 segment pins (A–G plus decimal point) and 4 digit common pins, allowing multiplexed control.
Compatibility and Requirements
This display is compatible with common microcontrollers such as Arduino, Raspberry Pi (with level shifting), and other 3.3V or 5V logic systems. It requires current-limiting resistors on each segment to prevent excessive current. For multiplexing, you will need transistor drivers or dedicated display driver ICs to handle the common cathode lines. The 12-pin layout fits standard breadboards and 0.1-inch pitch PCBs.
Typical Uses
Common applications include digital clocks, timers, counters, scoreboards, panel meters, and any project that needs a clear numeric readout. It is also used in consumer appliances like microwave ovens and washing machines, as well as in DIY electronics and educational kits.
What's in the Box
1 x 0.56-inch red 4-digit 7-segment LED display (common cathode, 12-pin).
Quick specs
- Model No. / Name
- 7 Segment LED Display
- No. of Pins
- 12
- Display Type
- Seven Segments
- Configuration
- Common Cathode
- Color
- Red
- No. of Digits
- 4 Digits













