Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A tiny 10 x 10mm boost converter that raises 1.5V–4.2V inputs to a regulated 5V output at up to 600mA typical. Solder pins make it simple to drop into DIY electronics and prototyping projects.

Key Highlights

  • Steps up 1.5V, 1.8V, 2.5V, 3V, 3.3V, 3.7V or 4.2V input to a regulated 5V output
  • Delivers up to 600mA typical output current for small loads
  • Conversion efficiency reaches up to 90% for less wasted power
  • Compact 10 x 10mm board weighs only about 2g
  • Solder pins simplify wiring into breadboards and perfboard
  • Rated for operation from -40°C to +85°C

Ideal For

  • Makers building low-voltage microcontroller projects
  • Electronics hobbyists prototyping on breadboard or perfboard
  • DIY repairers needing a small 5V rail
  • Students learning DC-DC step-up conversion
  • Builders of compact battery-powered gadgets

Buying Tip

Confirm your load stays within the 600mA typical output current and that your input source sits within 1.5V–4.2V before soldering the module into a build.

Elecvora expert review

Our verdict

A practical, very small boost module for turning common single-cell voltages into a stable 5V rail. It is best suited to light loads and builders who are comfortable soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 1.5V–4.2V input range covers many cell types
  • Up to 90% efficiency helps battery-powered builds
  • Tiny 10 x 10mm, 2g board fits tight spaces
  • Solder pins simplify integration

Cons

  • Requires soldering to connect
  • Output current limited to 600mA typical
  • Package contents are not specified

Best for

Small 5V microcontroller and sensor projects

Not ideal for

High-current loads above 600mA typical

Specifications

Item TypeBoost (Step-up) Voltage Converter
Input Voltage (V)1.5, 1.8, 2.5, 3, 3.3, 3.7, 4.2
Output Voltage5V regulated
Conversion efficiencyUp to 90%
Maximum Output Current (A)600mA (typical)
Operating Temperature (°C)-40 to +85
Length (mm)10
Width (mm)10
Weight (g)02
Sensor TypeStrain Gauge Based Load Cell
Operating Voltage (V)2.7~5.5
Shipping Weight0.005 kg
Shipping Dimensions4 × 3 × 2 cm

Frequently Asked Questions

What input voltages does this module accept?
It accepts 1.5V, 1.8V, 2.5V, 3V, 3.3V, 3.7V or 4.2V and converts them to a regulated 5V output.
How much current can it supply?
The maximum output current is 600mA typical. Keep your load within that figure for reliable operation.
Do I need to solder it?
Yes. The module comes with solder pins and requires soldering to attach wiring or headers.
How efficient is the conversion?
Conversion efficiency reaches up to 90%, depending on the input voltage and load.
What is included in the package?
Package contents are not specified in the product data, so confirm before ordering if this matters for your build.
What temperature range does it support?
It is rated to operate from -40°C to +85°C.

Overview

This Generic boost (step-up) voltage converter module accepts input voltages of 1.5V, 1.8V, 2.5V, 3V, 3.3V, 3.7V or 4.2V and produces a regulated 5V output. Conversion efficiency reaches up to 90%, and the module can supply up to 600mA typical output current. At 10mm long, 10mm wide and roughly 2g, it fits into tight builds where a full-size regulator board would not. Solder pins are included so the module can be joined to wires, headers or a perfboard.

Key Features

  • Step-up conversion from a 1.5V–4.2V input to a fixed 5V output
  • Up to 90% conversion efficiency
  • 600mA typical maximum output current
  • Compact 10 x 10mm footprint weighing about 2g
  • Solder pins for direct integration in DIY circuits
  • Operating temperature range of -40°C to +85°C

Specifications Explained

Input and output voltage

The input range covers the common voltages of single-cell and small multi-cell supplies, so the module can run from sources delivering 1.5V, 1.8V, 2.5V, 3V, 3.3V, 3.7V or 4.2V. Whatever the input within that set, the output is regulated at 5V, giving connected electronics a steady rail.

Current and efficiency

The 600mA typical output current suits small loads such as microcontrollers and sensors. Efficiency up to 90% means most of the input power reaches the output rather than being lost as heat, which matters in battery-powered builds.

Size and temperature

At 10 x 10mm and about 2g, the board can sit inside compact enclosures. The -40°C to +85°C operating range allows use in cold or warm environments within those limits.

Compatibility and Requirements

The module requires an input source within the stated 1.5V–4.2V range and a load that stays within the 600mA typical output current. Soldering is needed to attach the pins and wiring, so basic soldering tools and skills are required. No connector type or enclosure is supplied beyond the module itself.

Typical Uses

  • Powering 5V microcontrollers and sensors from low-voltage cells
  • Prototyping on breadboard or perfboard
  • Small DIY gadgets and repair projects
  • Compact builds where board space is limited

What's in the Box

Package contents are not specified for this listing. Check the product data before ordering if you need to confirm what is included.

Quick specs

Item Type
Boost (Step-up) Voltage Converter
Input Voltage (V)
1.5, 1.8, 2.5, 3, 3.3, 3.7, 4.2
Output Voltage
5V regulated
Conversion efficiency
Up to 90%
Maximum Output Current (A)
600mA (typical)
Operating Temperature (°C)
-40 to +85
See all specifications