Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact boost converter that steps up 1.5-4.2V to a stable 5V output at up to 85% efficiency. Its tiny 11mm x 7.5mm size makes it easy to fit into small electronics projects.

Key Highlights

  • Wide 1.5V to 4.2V input range for single-cell and low-voltage sources
  • Regulated 5V output at approximately 85% efficiency
  • Ultra-compact 11mm x 7.5mm board weighs only 1 gram
  • 150kHz switching frequency for stable conversion
  • Simple two-pin input and output for easy soldering

Ideal For

  • Electronics hobbyists building low-voltage projects
  • Makers needing a compact 5V supply from batteries
  • Repair technicians fixing small gadgets
  • Students learning about DC-DC conversion
  • DIY enthusiasts creating portable devices

Buying Tip

Always verify your input source stays within 1.5-4.2V and can supply enough current for your 5V load before soldering.

Elecvora expert review

Our verdict

A practical, ultra-small boost converter for low-power 5V applications. It is simple to use and offers good efficiency for its size, but users must respect the input voltage and power limits.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very compact and lightweight
  • Wide input voltage range
  • Good efficiency at 85%
  • Simple to integrate with soldering

Cons

  • Requires soldering for connections
  • No reverse polarity protection
  • Output voltage drops if input power is insufficient

Best for

Low-power DIY electronics and portable projects needing 5V from a single-cell battery

Not ideal for

High-power devices or applications requiring more than the module's nominal output

Specifications

Model No. / NameBoost Converter Module
Input Voltage (V)1.5-4.2
Output Voltage+5V
Efficiency0.85
Length (mm)11
Width (mm)7.5
Weight (g)1
Shipping Weight0.01 kg
Shipping Dimensions9 × 7 × 5 cm

What's in the box

  • 1 x 1.5V-4.2V to 5V DC-DC Boost Converter Module

Frequently Asked Questions

What is the maximum input voltage for this module?
The maximum input voltage is 4.2V. Exceeding this can permanently damage the module.
Can I use this module to charge a phone?
This module provides a 5V output, but its current capacity is limited. It may not supply enough current for fast charging, and the load must not exceed the module's rating.
Does the output voltage stay exactly 5V?
The output is nominally 5V, but it can be lower if the input power is insufficient or if the load draws too much current.
What is included in the package?
The package includes one boost converter module only. Wires and connectors are not included.
How do I connect the module?
Solder input wires to the input pads and output wires to the output pads, observing polarity. Use a multimeter to verify the output before connecting your device.
Is the module protected against reverse polarity?
No reverse polarity protection is mentioned in the specifications, so be careful to connect the input correctly.

Overview

The Generic 1.5-4.2V to 5V DC-DC Boost Converter Module is a miniature step-up board designed to raise low DC voltages to a stable 5V output. It accepts input voltages from 1.5V up to 4.2V, making it suitable for single-cell lithium batteries, USB power sources, and other low-voltage supplies. The module operates at a switching frequency of 150kHz and achieves a typical conversion efficiency of 85%, so most of the input power is delivered to the load. Measuring just 11mm by 7.5mm and weighing around 1 gram, it can be embedded into tight spaces where larger converters would not fit.

Key Features

  • Wide input range: Works with 1.5V, 1.8V, 2.5V, 3V, 3.3V, 3.7V, and 4.2V sources.
  • Stable 5V output: Provides a regulated 5V DC output for compatible devices.
  • High efficiency: Typical conversion efficiency of 85% reduces wasted energy.
  • Compact and lightweight: 11mm x 7.5mm board weighs only 1 gram.
  • Simple integration: Two input and two output pads for quick soldering.

Specifications Explained

Input Voltage (1.5-4.2V): This is the range of voltages the module can accept. Do not exceed 4.2V on the input, as higher voltages can damage the board. The input power source must be able to supply more power than the load requires; otherwise, the output voltage will drop below 5V.

Output Voltage (5V): The module delivers a nominal 5V output. The actual voltage may be slightly lower if the input power is insufficient or if the load draws more current than the module can provide.

Efficiency (85%): About 85% of the input power is converted to output power. The remaining 15% is dissipated as heat, which is minimal at low loads.

Dimensions and Weight: At 11mm x 7.5mm and 1 gram, the module is easy to hide inside small enclosures or wearables.

Compatibility and Requirements

This module is intended for DC low-voltage applications. Ensure that the input voltage never exceeds 4.2V. The input power source must be capable of delivering more power than the output load requires. The output load should not exceed the module's nominal rating; otherwise, the output voltage will sag. The module requires soldering to connect input and output wires. It does not include connectors or a case.

Typical Uses

  • Powering 5V sensors or microcontrollers from a single-cell battery.
  • DIY electronics projects and breadboard prototypes.
  • Repairing or modifying small gadgets that need a 5V supply.
  • Portable devices running from 3.7V lithium cells.

What's in the Box

1 x 1.5V-4.2V to 5V DC-DC Boost Converter Module.

Quick specs

Model No. / Name
Boost Converter Module
Input Voltage (V)
1.5-4.2
Output Voltage
+5V
Efficiency
0.85
Length (mm)
11
Width (mm)
7.5
See all specifications