Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 170 tie-point solderless breadboard in transparent ABS, with 17 labelled columns for quick circuit reference. It mounts with adhesive backing or M2 screws and accepts standard jumper wires and component leads.

Key Highlights

  • 170 tie points across 17 labelled columns of 10 holes
  • Transparent ABS body for easy visual inspection
  • Adhesive backing plus two M2 mounting holes
  • Compact 35 mm width and only 12 g
  • Solderless, reusable design for repeated prototyping
  • Works with LEDs, transistors, diodes, capacitors and resistors

Ideal For

  • Students learning basic electronics and circuit theory
  • Makers building small sensor or LED prototypes
  • Robotics hobbyists adding compact circuit modules
  • Engineers testing component behaviour before final design
  • Anyone needing a reusable solderless board for tight spaces

Buying Tip

Check that your jumper wires are around 0.8 mm diameter and within 20-29 AWG, since thicker leads may not seat reliably in the spring clips.

Elecvora expert review

Our verdict

A neat, low-cost breadboard for small circuits where space is limited. The transparent body and clear labelling make it easy to trace connections, though the 170-point capacity suits only compact designs.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear labelled grid speeds up wiring checks
  • Transparent housing shows internal contacts
  • Adhesive backing and M2 holes offer two mounting options
  • Compact and lightweight for tight builds
  • Reusable solderless design

Cons

  • 170 tie points is limited for larger circuits
  • No jumper wires or components included
  • Adhesive backing is best suited to flat, clean surfaces

Best for

Small, reusable circuit prototypes and educational experiments

Not ideal for

Large multi-IC projects that need hundreds of tie points

Specifications

Item TypeBreadboard
No. of Points170
Tie Points170
MaterialABS
Mounting Hole Diameter (mm)M2
Width (mm)35
Weight (g)12
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 170 pts Mini Breadboard SYB-170 Transparent

Frequently Asked Questions

How many tie points does this breadboard have?
It has 170 tie points arranged in 17 columns of 10 holes, separated by a central notch.
Do I need to solder to use it?
No. It is a solderless breadboard, so components and jumper wires push into the spring clips and can be removed again.
What wire sizes does it accept?
It accepts jumper wires around 0.8 mm in diameter and wire sizes from 20 to 29 AWG.
How can I mount the board?
Use the peel-and-stick adhesive backing on a flat surface, or fix it with two M2 screws through the mounting holes.
What is included in the package?
The package contains one 170 pts Mini Breadboard SYB-170 Transparent. Jumper wires, components and power supplies are not included.
Can I connect several boards together?
Yes. Additional breadboards can be used alongside this one when a project needs more space.

Overview

The Generic SYB-170 is a miniature solderless breadboard built for small, temporary circuits. It provides 170 tie points in 17 columns of 10 holes, with a central notch separating the two halves and column numbers 1 to 17 plus letter labels A to J so you can reference any hole position precisely. The transparent ABS housing lets you see where component legs and jumper wires sit inside the board.

With a width of 35 mm and a weight of about 12 g, it takes up very little bench space and can sit directly on a project enclosure or robot chassis. The adhesive backing allows semi-permanent mounting, and two M2 mounting holes give a screw-fixed alternative when you need a more secure hold.

Key Features

  • 170 tie points: 17 columns of 10 holes, split by a central notch, for small component networks and IC breakout work.
  • Labelled grid: numbered columns and lettered rows make wiring instructions easy to follow.
  • Transparent ABS body: sturdy plastic housing that shows the internal contact strips.
  • Dual mounting: peel-and-stick adhesive backing plus two M2 mounting holes.
  • Solderless and reusable: components and jumpers push in and pull out without soldering.

Specifications Explained

Tie points: 170 points is enough for a handful of components, a small IC circuit or a single add-on module. If a design grows, additional boards can be used alongside it.

Dimensions and weight: the 35 mm width and 12 g weight keep the board light enough to mount on moving projects and small enough to fit inside tight builds.

Mounting: the M2 hole diameter matches common small screws, while the adhesive backing suits flat, clean surfaces where drilling is not an option.

Materials: the ABS housing resists everyday handling, and the nickel-plated spring clips are designed to grip leads firmly over repeated insertions.

Compatibility and Requirements

The board accepts standard jumper wires with a diameter of about 0.8 mm and wire sizes from 20 to 29 AWG. It works with LEDs, transistors, diodes, capacitors and resistors. No soldering iron is required, but you will need your own jumper wires, components and, for active circuits, a suitable external power source.

Typical Uses

  • Quick LED and resistor experiments
  • Testing transistor, diode and capacitor circuits
  • Building small add-on modules and sensor breakouts
  • Robotics and educational circuit demonstrations
  • Prototyping before committing a design to a permanent board

What's in the Box

1 x 170 pts Mini Breadboard SYB-170 Transparent.

Quick specs

Item Type
Breadboard
No. of Points
170
Tie Points
170
Material
ABS
Mounting Hole Diameter (mm)
M2
Width (mm)
35
See all specifications