
1 / 2 · Click to enlarge
At a glance
This tft lcd displays is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name TFT Display Module; display size (inch) 2.4; operating voltage (v) 3.3V to 5V. Check that your power source supplies 3.3V to 5V before connecting it.
Key Highlights
- Model No. / Name: TFT Display Module
- Display Size (Inch): 2.4
- Operating Voltage (V): 3.3V to 5V
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | TFT Display Module |
|---|---|
| Display Size (Inch) | 2.4 |
| Display Resolution (pixel) | 240 × 320 |
| Operating Voltage (V) | 3.3V to 5V |
| Driver IC | ILI9341/ST7789 |
| Display Backlight | White |
| Color Depth | 262K/65K |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 8 × 10 × 2 cm |
Overview
The 2.4-inch SPI Interface 240x320 TFT Display Module is listed in our tft lcd displays range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: TFT Display Module (measured diagonally; compare with the space you have before ordering)
- Display Size (Inch): 2.4 (measured diagonally; compare with the space you have before ordering)
- Display Resolution (pixel): 240 × 320 (measured diagonally; compare with the space you have before ordering)
- Operating Voltage (V): 3.3V to 5V (match this to your power supply; too high a voltage can damage the part)
- Driver IC: ILI9341/ST7789
- Display Backlight: White (measured diagonally; compare with the space you have before ordering)
- Color Depth: 262K/65K
- Shipping Weight: 0.05 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
- SDO: Serial clock output
- LED: 3.3V IO and Power Supply pin
- SCL: Serial clock input
- SDA / SDI: Serial data input
- DC: Data / Command selection
- RST: Reset, Low level active
- CS: Chip Selection, Low level active
- GND: Ground
- VDD33: 3.3V Power Supply pin
- UTFT Support
Features:
- It is a 2.4" SPI TFT LCD Module
- 10pins interface.
- Module supports 2GB and 4GB SD cards.
- The LCD drive ic is ILI9341 or ST7789
- It's a 240 * 320 (resolution),
- 2.4 inch TFT LCD screen.
- The LCD has a wide viewing angle, the contrast is also very suitable.
- The display interface is serial, it just needs 5 wires (CS, RS, SCL, SDA, RST) for controlling.
- SDcard use hardware SPI interface (CS / MOSI / MISO / SCK), Not solder pins.
Package Includes:
1 x 2.4-inch SPI Interface 240x320 TFT Display ModuleQuick specs
- Model No. / Name
- TFT Display Module
- Display Size (Inch)
- 2.4
- Display Resolution (pixel)
- 240 × 320
- Operating Voltage (V)
- 3.3V to 5V
- Driver IC
- ILI9341/ST7789
- Display Backlight
- White













