Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A module 1.25 nylon spur gear with 24 teeth, a 6 mm bore and an aluminium centre insert for better load handling at the shaft. It weighs just 27 g and runs quietly, making it a practical drive gear for compact robotics and mechanical builds.

Key Highlights

  • Module 1.25 pitch with 24 teeth for predictable ratio planning
  • Aluminium insert strengthens the 6 mm bore under load
  • Nylon body keeps weight to 27 g and reduces running noise
  • 12.15 mm face width and 22.55 mm total width
  • 32.3 mm outer diameter fits compact assemblies
  • 30 mm mounting hole pitch circle for layout reference

Ideal For

  • Robotics builders assembling compact drive trains
  • 3D printer and mechanical hobbyists replacing worn gears
  • RC and model engineers working with module 1.25 gears
  • Makers prototyping low-noise gear mechanisms
  • Repairers sourcing a defined 6 mm bore spur gear

Buying Tip

Confirm your mating gear is also module 1.25 and that your shaft measures 6 mm, since mismatched module or bore size is the most common reason a spur gear will not fit.

Elecvora expert review

Our verdict

A well-defined nylon spur gear with a metal insert that makes sense for light-to-moderate drive duties where noise and weight matter. The published dimensions are detailed enough to plan an assembly without guesswork.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear, complete dimensional data including face and total width
  • Aluminium insert protects the bore from wear
  • Light at 27 g and quiet compared with metal gears
  • Standard module 1.25 makes ratio planning simple

Cons

  • Nylon teeth are not suited to very high torque or harsh environments
  • Only one gear is supplied, so mating gears must be sourced separately
  • No mounting hardware or shaft included

Best for

Compact robotics, printer and model mechanisms needing a quiet 24-tooth drive gear

Not ideal for

Heavy industrial drives or high-torque applications where metal gears are required

Specifications

Model No. / Name1.25M-24T-6-30
Gear StructureNylon Metal Insert Spur
Pitch (Module)1.25
No. of Teeth24
Face Width (FW) mm12.15
Total Width (W)22.55
Internal Diameter(ID)(mm)6
Outer Diameter (mm)32.3
Mounting Hole PCD (mm)30
Gear MaterialNylon and Aluminium
Weight (g)27
ColorBlack and White
Shipping Weight0.03 kg
Shipping Dimensions8 × 6 × 3 cm

What's in the box

  • 1 x Nylon metal insert spur gear (1.25M-24T-6-30)

Frequently Asked Questions

What does 1.25M-24T-6-30 mean?
It describes module 1.25, 24 teeth, a 6 mm internal diameter and a 30 mm mounting hole pitch circle. These are the key numbers for matching the gear to your assembly.
What shaft size does this gear fit?
The internal diameter is 6 mm, so it is intended for a 6 mm shaft. The bore is formed by an aluminium insert.
Can I use it with any other gear?
It must mesh with another gear of the same module, 1.25. Tooth count can differ, which is how you change ratio, but the module must match.
Is lubrication required?
Nylon gears generally run with little or no lubrication. Keeping the teeth clean and free of debris is the main maintenance step.
How much does it weigh?
The gear itself weighs 27 g. Shipping weight is listed separately at 0.03 kg.
What is included in the package?
One nylon metal insert spur gear, model 1.25M-24T-6-30. No shaft, mounting screws or other hardware are included.

Overview

This spur gear is built around a nylon body with an aluminium insert set into the centre. The combination is deliberate: the nylon gives you a light, quiet-running gear, while the metal insert reinforces the bore where the shaft transfers torque. With 24 teeth at module 1.25, it is a defined, repeatable component rather than a generic part, so you can plan a gear train around known numbers.

Key Features

  • Nylon and aluminium construction for low weight with a reinforced shaft interface
  • Module 1.25, 24 teeth for straightforward ratio calculations
  • 6 mm internal diameter to suit a matching shaft size
  • 12.15 mm face width giving a solid tooth contact area
  • 27 g weight that keeps small assemblies balanced
  • Black and white finish that is easy to identify in a parts bin

Specifications Explained

Module and tooth count are the two numbers that matter most. Module 1.25 sets the tooth size, and 24 teeth sets the ratio. Any gear you mesh with this one must share the same module, otherwise the teeth will not run together correctly.

Bore and insert. The 6 mm internal diameter is the shaft size the gear mounts on. Because the bore is formed by an aluminium insert rather than nylon alone, it holds its shape better when the gear is repeatedly loaded.

Diameters and widths. The 32.3 mm outer diameter tells you the space the gear occupies. Face width is 12.15 mm, the toothed section, while total width is 22.55 mm, which includes the hub area. Check both when fitting into a housing.

Mounting hole pitch circle. At 30 mm, this gives you a reference diameter for hole positions if the gear is to be fixed or paired with a mounting plate.

Compatibility and Requirements

This gear meshes with other module 1.25 gears. It requires a 6 mm shaft and enough clearance for a 32.3 mm outer diameter and 22.55 mm total width. No other fittings are supplied, so confirm your shaft and housing dimensions before ordering.

Typical Uses

Small robotics assemblies, 3D printer and mechanical builds, RC mechanisms, model machinery, and prototype gear trains where a quiet nylon gear with a reinforced bore is preferable to an all-metal part.

What's in the Box

  • 1 x Nylon metal insert spur gear (1.25M-24T-6-30)

Quick specs

Model No. / Name
1.25M-24T-6-30
Gear Structure
Nylon Metal Insert Spur
Pitch (Module)
1.25
No. of Teeth
24
Face Width (FW) mm
12.15
Total Width (W)
22.55
See all specifications