Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A lightweight L-shaped bracket in hard aluminum for mounting 25mm DC gear motors securely. Extra mounting holes let you adapt it to custom mechanisms without adding noticeable weight.

Key Highlights

  • L-shaped block design for firm 25mm DC gear motor mounting
  • Made from hard aluminum for a strong, lightweight mount
  • Black sandblasted oxidation finish for a clean, durable surface
  • Compact 30 x 25mm footprint at only 10g
  • Multiple holes suit common motor horn patterns
  • Extra holes support user-defined motor fitting

Ideal For

  • Robotics hobbyists building small wheeled robots
  • Students and makers working on prototype mechanisms
  • RC builders using 25mm DC gear motors
  • DIY automation and custom frame projects
  • Anyone replacing a worn or loose motor mount

Buying Tip

Check your motor's horn hole spacing against the bracket holes before ordering, and have M3-style fasteners ready since screws are not included.

Elecvora expert review

Our verdict

A tidy, low-cost mount that does one job well: holding a 25mm DC gear motor firmly in a compact space. The hard aluminum body and extra holes make it more adaptable than a plain factory bracket.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Light at about 10g with a rigid aluminum build
  • Extra holes allow custom motor fitting
  • Clean black sandblasted oxidation finish
  • Compact 30 x 25mm size suits small builds

Cons

  • Motor and mounting screws are not included
  • Only suited to 25mm-class DC gear motors
  • Hole pattern must be checked against your motor horn

Best for

Small robot and prototype builds needing a secure 25mm gear motor mount

Not ideal for

Large motors or heavy-duty load-bearing mounts

Specifications

Item TypeBracket
MaterialHard aluminum
ColorBlack
SurfacingSandblasting oxidation
Length (mm)30
Width (mm)25
Weight (g)10
Shipping Weight0.01 kg
Shipping Dimensions5 × 5 × 3 cm

What's in the box

  • 1 x 25mm DC Gear Motor Block L Shape Motor Bracket

Frequently Asked Questions

What motor does this bracket fit?
It is designed for 25mm DC gear motors and has holes that suit most standard DC gear motor horn patterns. Check your motor's hole spacing before ordering.
Are screws included?
No. The package contains only the bracket, so you will need to supply your own mounting screws.
What is the bracket made of?
It is made from hard aluminum with a black sandblasted oxidation finish.
How much does it weigh?
The bracket weighs approximately 10g, so it adds very little mass to a small build.
Can I drill extra holes in it?
The bracket already includes extra holes for user-defined fitting. If you drill further holes, use sharp bits and support the part carefully.
How should I care for it?
Wipe it with a dry or slightly damp cloth and keep it dry. Avoid abrasive cleaners that could dull the sandblasted black finish.

Overview

This L-shaped motor block bracket is a simple, sturdy solution for fixing a 25mm DC gear motor to a project frame, panel or custom mechanism. The angled form lets the motor sit against one face while the other face bolts to your structure, so the motor stays aligned and secure under load.

It is built from hard aluminum with a black sandblasted oxidation finish. That combination keeps the part light at around 10g while giving it a surface that looks tidy and handles normal workshop handling. With a 30mm length and 25mm width, it suits compact builds where space is tight.

Key Features

  • L-shaped block profile for stable two-plane mounting of 25mm DC gear motors
  • Hard aluminum construction for a strong mount at low weight
  • Sandblasted oxidation finish in black for a clean, wear-friendly surface
  • Multiple mounting holes positioned for common DC gear motor horn patterns
  • Extra holes so you can create your own motor fitting arrangements
  • Compact and light at 30 x 25mm and about 10g

Specifications Explained

Material: Hard aluminum gives the bracket stiffness without the weight of steel, which matters on small robots and moving mechanisms.

Finish: Sandblasting oxidation produces a matte black surface that resists fingerprints and light scuffs during assembly and use.

Size: At 30mm long and 25mm wide, the bracket fits tight layouts while still offering enough face area for motor fixing.

Weight: Around 10g means the mount adds almost nothing to the total mass of a small build.

Compatibility and Requirements

The bracket is designed for 25mm DC gear motors and includes holes that suit most standard DC gear motor horn patterns. Extra holes are provided for user-defined fitting. Mounting screws and the motor itself are not included, so you will need suitable fasteners for your frame and motor.

Typical Uses

  • Small robot chassis and sumo or line-following builds
  • RC and hobby mechanisms using 25mm gear motors
  • Student and classroom robotics projects
  • Custom prototype frames and DIY automation
  • Repair or replacement of an existing motor mount

What's in the Box

1 x 25mm DC Gear Motor Block L Shape Motor Bracket. Motor, screws and other hardware are not included.

Quick specs

Item Type
Bracket
Material
Hard aluminum
Color
Black
Surfacing
Sandblasting oxidation
Length (mm)
30
Width (mm)
25
See all specifications