Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 3.5 inch 320x480 TFT touch display that mounts directly onto a Raspberry Pi over SPI. It adds a compact screen and resistive stylus input without needing a separate monitor, case or power source.

Key Highlights

  • 3.5 inch TFT panel with 320x480 resolution and 64K colours
  • Resistive touchscreen driven by the XPT2046 controller
  • SPI interface for direct connection to the Raspberry Pi board
  • LED backlight keeps the screen visible indoors
  • Lightweight module at roughly 60 g and 85 x 55 x 20 mm
  • Stylus included for accurate touch input

Ideal For

  • Raspberry Pi hobbyists building compact control panels
  • Students learning SPI displays and resistive touch
  • Makers creating portable or handheld Pi terminals
  • Home automation users wanting an on-device status screen
  • Developers testing dashboards without a full monitor

Buying Tip

Plan for a driver installation and a stand-alone 5V/2A power adapter, since the display needs software support and a computer USB port may not deliver enough current for both the Pi and the screen.

Elecvora expert review

Our verdict

A sensible low-cost way to give a Raspberry Pi its own small touchscreen without adding a monitor, case or extra power supply. It is best treated as a compact interface panel rather than a general-purpose display.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Mounts directly on the Raspberry Pi for a tidy, integrated build
  • Resistive touch with XPT2046 controller and included stylus
  • SPI interface keeps other GPIO pins available
  • Lightweight at about 60 g with LED backlight

Cons

  • Requires a driver installation for the official Raspberry Pi image
  • Resistive touch is less finger-friendly than capacitive panels
  • 320x480 resolution limits detailed graphics and video use

Best for

Compact Raspberry Pi control panels and portable terminals

Not ideal for

Users who need a large, high-resolution or capacitive touch display

Specifications

Item TypeDisplay
Display Size (Inch)3.5
Touchscreen (Y/N)Yes
Resolution320x480
InterfaceSPI
LCD TypeTFT
Touch Screen TypeResistive Screen
Touch ControllerXPT2046
Display BacklightYes, LED
Aspect Ratio08:05
Dimensions (L x W x H) mm85 x 55 x 20 mm
Weight (g)60 gm
Color64K 65536 colors
Shipping Weight0.008 kg
Shipping Dimensions12 × 8 × 3 cm

What's in the box

  • 1 x 3.5 inch Touch-Screen LCD Raspberry Pi Display
  • 1 x Touch Screen Stylus
  • Screws and nuts set for assembly

Frequently Asked Questions

Does this display work with a Raspberry Pi out of the box?
It needs a driver to work with the official Raspberry Pi image. Install the correct driver for your setup before expecting the screen and touch input to function.
How does the display connect to the Pi?
It connects over the SPI interface and mounts on top of the board. Check that the hardware connection is correct and fully seated if the screen does not respond.
What power supply should I use?
A stand-alone 5V/2A power adapter is strongly recommended. A computer USB port may not supply enough current to run both the Pi and the LCD.
Is the touchscreen capacitive or resistive?
It is a resistive touchscreen using the XPT2046 controller, and a stylus is included for accurate input.
What comes in the package?
You receive one 3.5 inch touch-screen LCD Raspberry Pi display, one touch screen stylus, and a full set of screws and nuts for assembly.
What resolution and colour depth does it offer?
The panel is 320x480 with 64K colour output and an LED backlight, in an 08:05 aspect ratio.

Overview

This 3.5 inch TFT LCD module is built to sit directly on top of a Raspberry Pi, turning the board into a small self-contained display device. Because it draws its connection through the SPI interface and mounts on the GPIO header area, it removes the need for a separate HDMI monitor, external case or dedicated power supply. The panel offers 320x480 resolution with 64K colour output and an LED backlight, so text, menus and simple graphics stay clear in everyday indoor conditions.

Touch input comes from a resistive screen paired with an XPT2046 touch controller, and a stylus is supplied for precise tapping and drawing. At around 60 g and 85 x 55 x 20 mm, the module adds very little bulk to a build.

Key Features

  • Integrated design: mounts onto the Raspberry Pi rather than sitting beside it as a separate monitor.
  • 320x480 TFT panel: a compact portrait-oriented screen with 64K colours.
  • Resistive touch: XPT2046 controller supports stylus or fingertip input.
  • SPI interface: a simple serial connection that leaves other pins available for sensors and add-ons.
  • LED backlight: keeps the display readable without ambient light.
  • Lightweight: roughly 60 g, so it will not strain a small enclosure or mount.

Specifications Explained

The 3.5 inch diagonal is small enough to fit handheld and panel-mounted projects but large enough for menus, status readouts and simple interfaces. The 320x480 resolution suits text-based dashboards and basic graphics rather than detailed photo or video work. The 08:05 aspect ratio gives a taller-than-wide layout, which works well for lists, terminals and control panels.

SPI is the key connection detail: it is a serial bus, so the display communicates with the Pi over a few dedicated pins instead of consuming the full HDMI output. The XPT2046 touch controller is a common resistive touch chip, and resistive panels respond to pressure, which is why the included stylus is useful for accurate selection.

Compatibility and Requirements

The module is designed for Raspberry Pi boards and connects over SPI. To use the LCD with the official Raspberry Pi image, a driver must be installed; if you are unsure which driver applies to your setup, check with the seller before installing. Confirm that the hardware connection is seated correctly if the display does not behave as expected.

A stand-alone 5V/2A power adapter is strongly recommended, because a computer USB port may not supply enough current for both the Pi and the display.

Typical Uses

  • Compact status and control panels for home automation
  • Portable Raspberry Pi terminals and retro-style consoles
  • Learning projects that teach SPI displays and touch input
  • Camera or sensor readouts where a full monitor is impractical

What's in the Box

The package includes one 3.5 inch touch-screen LCD Raspberry Pi display and one touch screen stylus. A full set of screws and nuts is supplied for assembly.

Quick specs

Item Type
Display
Display Size (Inch)
3.5
Touchscreen (Y/N)
Yes
Resolution
320x480
Interface
SPI
LCD Type
TFT
See all specifications