Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A white nylon spur gear with 1 module, 32 teeth, an 8 mm bore and a 6.95 mm face width, weighing about 6 grams. Its lightweight, quiet-running nylon body makes it a simple drop-in choice for small geared mechanisms and repairs.

Key Highlights

  • 1 module spur gear with 32 teeth for defined gear ratios
  • 8 mm internal bore fits matching 8 mm shafts
  • 6.95 mm face width and 14.42 mm total width
  • White nylon body weighs approximately 6 grams
  • Mounting holes on a 32 mm pitch circle diameter
  • Quiet running with no routine lubrication needed

Ideal For

  • RC and FPV builders assembling small geared drives
  • Hobby robotics and prototype makers
  • Makers repairing light mechanical equipment
  • Students and educators building gear train demonstrations
  • DIY enthusiasts working on compact motorised projects

Buying Tip

Confirm the mating gear is also module 1 and that your shaft is 8 mm before ordering, since tooth size and bore must match exactly.

Elecvora expert review

Our verdict

A useful, low-cost nylon spur gear for light-duty builds where a specific 32-tooth, module 1 geometry and 8 mm bore are needed. It is best treated as a prototyping and repair part rather than a load-bearing component.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight at around 6 grams
  • Quiet running nylon construction
  • Clear, well-defined module 1 and 32-tooth geometry
  • Mounting holes on a 32 mm PCD add fixing options

Cons

  • Nylon is not suited to high-torque loads
  • No lubrication or load ratings are specified
  • Only one gear is included, so a mating gear must be sourced separately

Best for

Light-duty geared mechanisms, prototypes and repairs needing a module 1, 32-tooth nylon gear

Not ideal for

High-torque or heavy industrial drivetrains

Specifications

Model No. / Name(1M-32T-8-32)
Gear StructureSpur
Pitch (Module)1
No. of Teeth32
Face Width (FW) mm6.95
Total Width (W)14.42
Internal Diameter(ID)(mm)8
Outer Diameter (mm)33.67
Mounting Hole PCD (mm)32
Gear MaterialNylon
ColorWhite
Weight (g)6
Shipping Weight0.01 kg
Shipping Dimensions8 × 6 × 4 cm

What's in the box

  • 1 x Nylon Spur Gear (1M-32T-8-32)

Frequently Asked Questions

What does 1M-32T-8-32 mean?
It describes a module 1 spur gear with 32 teeth and an 8 mm bore. The final figure relates to the mounting hole pitch circle diameter of 32 mm.
What gear will this mesh with?
It meshes with another spur gear of the same module 1. The tooth counts of the two gears set the resulting ratio.
What shaft size does it fit?
The internal diameter is 8 mm, so it fits a shaft or axle of that nominal size.
Does it need lubrication?
Nylon gears generally run without routine lubrication in light-duty applications. In dusty or high-use setups, a light inspection is sensible.
How many gears are included?
The package contains one nylon spur gear.
Is it suitable for high-torque applications?
It is intended for light-duty use. No torque rating is specified, so it should not be used in demanding load-bearing drives.

Overview

The 1M-32T-8-32 is a single spur gear made from white nylon. It uses a 1 module tooth profile with 32 teeth, an 8 mm internal bore and a 6.95 mm face width. With an outer diameter of 33.67 mm and a weight of about 6 grams, it is intended for compact mechanisms where weight and noise matter more than heavy load capacity.

Because the gear is moulded in nylon rather than cut from metal, it runs quietly and does not require routine lubrication in light-duty use. That makes it a convenient part for prototypes, repairs and small motor-driven assemblies.

Key Features

  • Defined gear geometry: 1 module pitch with 32 teeth for predictable meshing with matching module 1 gears.
  • 8 mm bore: fits shafts or axles of the same nominal diameter.
  • Mounting hole PCD 32 mm: allows the gear to be fixed to a hub or carrier in addition to the bore fit.
  • Lightweight nylon: approximately 6 grams, helping keep small builds light.
  • Quiet operation: nylon absorbs vibration better than metal in light applications.

Specifications Explained

Module 1 sets the tooth size. A gear only meshes correctly with another gear of the same module, so check the module of the mating part before ordering.

32 teeth determines the gear ratio when paired with another gear. Combined with a mating gear, it defines the speed and torque relationship of the pair.

8 mm internal diameter is the bore that slides over a shaft. The 32 mm mounting hole PCD is the circle on which any fixing holes are arranged, useful when the gear must be bolted or screwed to a carrier.

6.95 mm face width is the toothed contact width, while the 14.42 mm total width includes the full body of the gear. The 33.67 mm outer diameter helps you confirm clearance inside a housing.

Compatibility and Requirements

This gear requires a mating gear of the same 1 module to mesh properly, and a shaft or axle matching the 8 mm bore. Confirm that the 33.67 mm outer diameter and 14.42 mm total width fit your available space. No other compatibility information is specified for this part.

Typical Uses

Suitable for small motor-driven mechanisms, hobby robotics, RC and FPV projects, prototype drivetrains, light mechanical toys and repair work where a 32-tooth module 1 nylon gear is needed. It is not intended for high-torque or heavy industrial loads.

What's in the Box

1 x Nylon Spur Gear (1M-32T-8-32).

Quick specs

Model No. / Name
(1M-32T-8-32)
Gear Structure
Spur
Pitch (Module)
1
No. of Teeth
32
Face Width (FW) mm
6.95
Total Width (W)
14.42
See all specifications