Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 3K roll-wrapped carbon fibre tube with 18mm OD, 16mm ID and 1000mm length. Its 1mm wall and glossy twill finish make it a strong, lightweight choice for RC and structural projects.

Key Highlights

  • Roll-wrapped construction for high lateral strength
  • 3K glossy twill surface with 1mm wall thickness
  • 18mm outer diameter and 16mm inner diameter
  • 1000mm length, hollow core
  • UV resistant and corrosion resistant
  • Low coefficient of thermal expansion

Ideal For

  • RC aircraft builders making lightweight booms
  • FPV pilots constructing custom frames
  • Drone hobbyists needing strong, light arms
  • Makers building robots or mechanical structures
  • Engineers replacing metal tubes in prototypes

Buying Tip

Plan your cuts carefully and use a fine-tooth saw or abrasive wheel; always wear a mask and eye protection when cutting carbon fibre.

Elecvora expert review

Our verdict

A well-made roll-wrapped tube that offers a good balance of strength and weight for hobby and light structural use. It is not suited to high-crush applications, but for booms and arms it performs well.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Strong lateral stiffness for its weight
  • Clean glossy twill finish
  • UV and corrosion resistant
  • Consistent 1mm wall thickness

Cons

  • Not strong against crushing forces
  • Resin softens above 130°C
  • No end fittings included

Best for

RC and FPV hobbyists building lightweight frames and booms

Not ideal for

Applications with high clamping or crushing loads

Specifications

Production processRoll-Wrapped
Thickness (mm)1
Material finish3K glossy twill surface
Different densities1.5g/cm^3
Glass Transition Temperature130°C
Outer Diameter (mm)18
Dimensions (L x W x H) mm18mm* 16mm* 1000mm
Shipping Weight0.22 kg
Shipping Dimensions102 × 26 × 1 cm

What's in the box

  • 1 x 3K Roll-wrapped Carbon Fibre Tube (Hollow) 18mm(OD) * 16mm(ID) * 1000mm(L)

Frequently Asked Questions

Can this tube be cut to length?
Yes, it can be cut with a fine-tooth saw or abrasive wheel. Always wear appropriate protective equipment.
Is the tube hollow?
Yes, it has a 16mm inner diameter, making it hollow.
What is the wall thickness?
The wall thickness is 1mm.
Is it UV resistant?
Yes, the tube is UV resistant for outdoor use.
What is included in the package?
One carbon fibre tube of 18mm OD, 16mm ID and 1000mm length.
Can I drill holes in it?
Yes, but use a sharp bit and back the tube to avoid splintering. Avoid over-tightening fasteners.

Overview

This carbon fibre tube is produced by roll wrapping unidirectional prepreg around a mandrel, then curing it under heat-shrink tape. The result is a hollow tube with a 3K glossy twill surface, an 18mm outer diameter, a 16mm inner diameter and a 1000mm length. The 1mm wall keeps weight low while providing good bending strength along the tube. It is a practical replacement for metal tubes in projects where weight saving and stiffness are important.

Key Features

  • Roll-wrapped manufacturing for strength in the lateral axis
  • 3K glossy twill finish for a clean, professional look
  • UV resistant and corrosion resistant for outdoor use
  • Low coefficient of thermal expansion for dimensional stability
  • Non-poisonous material

Specifications Explained

Outer diameter (18mm): The outside measurement of the tube, useful for matching clamps, mounts or fittings.

Inner diameter (16mm): The hollow core size, which determines what can fit inside or slide over.

Wall thickness (1mm): The difference between outer and inner radius; a thin wall keeps weight down.

Length (1000mm): A standard metre length that can be cut to size for your project.

Roll-wrapped: Fibres are laid in multiple directions, giving better lateral strength than pultruded tubes, but the tube is not strong against crushing forces across its diameter.

Glass transition temperature (130°C): The resin softens above this temperature, so avoid high-heat applications.

Compatibility and Requirements

This tube is a standalone structural component. It does not include end caps, fittings or mounting hardware. When cutting or drilling, use appropriate tools for carbon fibre and wear personal protective equipment. The tube is not intended for use in applications that apply heavy crushing loads across its diameter.

Typical Uses

Common applications include RC aircraft booms, FPV frame arms, drone landing gear, robot arms, tripod legs, and lightweight structural supports in hobby and engineering projects.

What's in the Box

  • 1 x 3K Roll-wrapped Carbon Fibre Tube (Hollow) 18mm(OD) * 16mm(ID) * 1000mm(L)

Quick specs

Production process
Roll-Wrapped
Thickness (mm)
1
Material finish
3K glossy twill surface
Different densities
1.5g/cm^3
Glass Transition Temperature
130°C
Outer Diameter (mm)
18
See all specifications