Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 1000mm long pultruded square carbon fiber tube with 10mm outer and 8mm inner dimensions. It delivers high lengthwise strength and rigidity at very low weight for RC aircraft and lightweight structures.

Key Highlights

  • Pultruded 100% unidirectional carbon fiber construction
  • Square hollow profile 10mm OD x 8mm ID
  • 1000mm length with 1mm wall thickness
  • High strength and stable dimensions along the length
  • UV resistant and corrosion resistant
  • Electrically and thermally non-conductive

Ideal For

  • RC scale aircraft builders
  • Glider and sailplane hobbyists
  • Helicopter model constructors
  • DIY lightweight structure projects
  • Makers needing a square carbon profile

Buying Tip

Check that the 8mm inner dimension suits your insert or spar before ordering, and plan gentle clamping because the thin wall can crush.

Elecvora expert review

Our verdict

A well-made pultruded square tube that delivers high lengthwise stiffness at very low weight. It is best treated as a structural element where bending loads dominate and crushing loads are avoided.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very light for its length
  • High strength and rigidity along the axis
  • Stable square cross-section
  • UV and corrosion resistant
  • Electrically non-conductive

Cons

  • Thin wall is vulnerable to crushing
  • Unidirectional fibers give little hoop strength
  • No mounting hardware included

Best for

RC aircraft and lightweight structural builds needing a square carbon profile

Not ideal for

Applications with high clamping or crushing forces

Specifications

Glass Transition Temperature130°C
Inner Diamensions (mm)8 x 8
Outer Diameter (mm)10 x 10
Length (mm)1000
Shipping Weight0.02 kg
Shipping Dimensions102 × 2 × 1 cm

What's in the box

  • 1 x Pultruded Square Carbon Fiber Tube (Hollow) 10mm OD x 8mm ID x 1000mm

Frequently Asked Questions

Can I cut this carbon fiber tube?
Yes, it can be cut with a fine-tooth saw or rotary cutting disc. Support the tube and wear a dust mask, as carbon dust is irritating.
Is this tube strong in all directions?
No. The unidirectional fibers give high strength along the length, but the tube is vulnerable to crushing and clamping forces across the wall.
Does it conduct electricity?
No, the tube is electrically and thermally non-conductive. However, carbon dust from cutting can be conductive, so clean up thoroughly.
What is included with the tube?
The package includes one pultruded square carbon fiber tube, 10mm OD x 8mm ID x 1000mm long. No hardware or instructions are included.
How should I care for this tube?
Store it away from sharp edges and heavy loads. Keep it below the 130°C glass transition temperature and seal cut ends to prevent moisture ingress.
Can I glue this tube?
Yes, epoxy and suitable structural adhesives bond well to the resin surface. Lightly sand the bonding area first for better adhesion.

Overview

This pultruded square carbon fiber tube is a hollow structural section measuring 10mm outside, 8mm inside and 1000mm long. It is produced by pultrusion, a continuous process that pulls carbon fiber strands through resin and a forming die before curing. The result is a straight, consistent tube with unidirectional fibers running along its length. That gives it excellent strength and rigidity in bending, making it a practical choice for lightweight frames and linkages.

Key Features

  • Unidirectional carbon fiber: fibers run lengthwise for high strength along the tube.
  • Square hollow profile: 10mm OD and 8mm ID with a 1mm wall.
  • Stable dimensions: pultrusion keeps the cross-section consistent over the 1000mm length.
  • UV resistant: suitable for outdoor projects exposed to sunlight.
  • Corrosion resistant: unaffected by moisture and common environmental exposure.
  • Non-conductive: electrically and thermally insulating, useful near electronics.

Specifications Explained

The 10mm x 10mm outer dimension and 8mm x 8mm inner dimension define a square tube with a 1mm wall. That wall is thin, so the tube is very light while still stiff along its axis. The 1000mm length gives you a full metre to cut down for your build. The glass transition temperature of 130°C indicates the resin's thermal limit; keep heat sources below this during use and avoid prolonged exposure near that temperature. Shipping weight is just 0.02kg, and the packed dimensions are 102 x 2 x 1 cm.

Compatibility and Requirements

This is a raw structural component, not a plug-and-play part. It has no electrical connectors or mounting hardware included. You will need to cut, drill or bond it to suit your project. Because the fibers are unidirectional, the tube is strong in bending but vulnerable to crushing forces, so use gentle clamping and avoid over-tightening screws through the wall.

Typical Uses

  • Scale aircraft and glider fuselage or wing spars
  • Helicopter frames and tail booms
  • Lightweight RC model construction
  • General hobby and DIY structures needing a square carbon profile

What's in the Box

1 x pultruded square carbon fiber tube, hollow, 10mm OD x 8mm ID x 1000mm length.

Quick specs

Glass Transition Temperature
130°C
Inner Diamensions (mm)
8 x 8
Outer Diameter (mm)
10 x 10
Length (mm)
1000
Shipping Weight
0.02 kg
Shipping Dimensions
102 × 2 × 1 cm
See all specifications