
1 / 3 · Click to enlarge
AI Summary
Two solid pultruded carbon fibre rods, each 1.5mm x 1000mm, offering high stiffness and low weight for RC models and lightweight structures. With 65% fibre volume and 230 GPa modulus, they provide reliable performance in demanding applications.
Key Highlights
- Solid pultruded carbon fibre construction with approx. 65% fibre volume
- High stiffness: Young's modulus of 230 GPa for minimal deflection
- Ultra-lightweight: just 2.5g per metre, ideal for weight-sensitive builds
- Low coefficient of expansion for dimensional stability
- Glass transition temperature of 170°C for moderate heat resistance
- Pack of 2 rods, each 1.5mm diameter and 1000mm length
Ideal For
- RC model builders needing lightweight pushrods or reinforcements
- Kite makers looking for stiff, durable spars
- Drone frame designers requiring high stiffness-to-weight ratio
- DIY enthusiasts working on small structural projects
- Hobbyists repairing or upgrading lightweight models
Buying Tip
When cutting these rods, use a fine-toothed saw or rotary tool and always wear a dust mask to avoid inhaling carbon fibre particles.
Elecvora expert review
Our verdict
These pultruded carbon fibre rods offer excellent stiffness and low weight for their size, making them a practical choice for small-scale structural and hobby applications. However, their solid, rigid nature means they are not suitable for applications requiring flexibility, and careful handling is needed to avoid splinters.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High stiffness (230 GPa) for minimal deflection
- Extremely lightweight (2.5g per metre)
- Low thermal expansion for dimensional stability
- Consistent quality from pultrusion process
Cons
- Solid rod cannot be bent without breaking
- Requires careful cutting to avoid splintering
- Not suitable for high-temperature environments above 170°C
Best for
RC models, kites, and lightweight structural reinforcements
Not ideal for
Applications requiring flexible or bendable rods
Specifications
| Fiber Volume | Approx. 65% |
|---|---|
| Fiber Density | 1..5g/cm3 |
| Glass Transition Temperature | 150°C~190°C |
| Expansion Coefficient | small |
| Weight per meter | 2.5g per meter |
| Resin glass transition (Tg) | 170º C |
| Youngs Modulus | 230 GPa |
| Dimensions (L x W x H) mm | 1.5mm * 1000mm |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 102 × 2 × 1 cm |
What's in the box
- 2 x Pultruded Carbon Fibre Rod (Solid) 1.5mm x 1000mm
Frequently Asked Questions
Can these rods be bent?
What is the maximum temperature these rods can withstand?
How should I cut these rods?
Are these rods conductive?
What is included in the pack?
Can I glue these rods?
Overview
These solid pultruded carbon fibre rods are manufactured using a continuous pultrusion process, where carbon fibres are pulled through a resin bath and a heated die to cure the resin while forming the rod shape. The result is a dense, unidirectional composite with approximately 65% fibre volume, providing high strength and stiffness along the length of the rod. Each rod measures 1.5mm in diameter and 1000mm in length, and the pack includes two rods. At only 2.5g per metre, they are extremely lightweight, making them suitable for applications where every gram counts.
Key Features
- High stiffness: Young's modulus of 230 GPa ensures minimal bending under load.
- Lightweight: 2.5g per metre allows for weight-critical designs.
- Low thermal expansion: Maintains dimensions across temperature changes.
- Moderate heat resistance: Glass transition temperature of 170°C.
- Unidirectional reinforcement: Fibres run longitudinally for maximum axial performance.
Specifications Explained
Fibre volume (approx. 65%): A high fibre-to-resin ratio contributes to the rod's strength and stiffness while keeping weight low. Young's modulus (230 GPa): This measures the rod's resistance to elastic deformation; a higher value means it bends less under the same load. Glass transition temperature (170°C): The resin softens above this temperature, so the rod should not be used in environments exceeding this limit. Weight per metre (2.5g): The low weight makes these rods ideal for flying models and other weight-sensitive applications. Expansion coefficient (small): The rod changes length very little with temperature, which is important for precision assemblies.
Compatibility and Requirements
These rods are solid and rigid, and they can be cut to length using a rotary tool or a fine-toothed saw. When cutting or sanding, always wear appropriate personal protective equipment, such as gloves and a dust mask, to avoid inhaling carbon fibre dust. The rods are compatible with common adhesives, including epoxy, for bonding to other materials. No additional components are required for use, but proper handling is necessary to prevent splintering.
Typical Uses
These carbon fibre rods are commonly used in radio-controlled models, kites, and lightweight structural elements where a high strength-to-weight ratio is beneficial. They can serve as pushrods, frame reinforcements, or spars in small aircraft and drones. Their low thermal expansion also makes them suitable for applications requiring dimensional stability.
What's in the Box
2 x Pultruded Carbon Fibre Rod (Solid) 1.5mm x 1000mm
Quick specs
- Fiber Volume
- Approx. 65%
- Fiber Density
- 1..5g/cm3
- Glass Transition Temperature
- 150°C~190°C
- Expansion Coefficient
- small
- Weight per meter
- 2.5g per meter
- Resin glass transition (Tg)
- 170º C











