Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Pultruded carbon fibre tubes, 8mm OD x 6mm ID x 1000mm, pack of 2. High lengthwise strength and rigidity make them ideal for lightweight RC and structural builds.

Key Highlights

  • Pultruded from unidirectional carbon fibre for high lengthwise strength
  • 8mm outer diameter, 6mm inner diameter, 1mm wall thickness
  • 1000mm length, pack of 2 tubes
  • Density 1.5g/cm3 for lightweight construction
  • UV resistant and corrosion resistant
  • Electrically and thermally non-conductive

Ideal For

  • RC aircraft builders constructing scale models or gliders
  • Drone enthusiasts building lightweight frames or arms
  • Helicopter hobbyists needing tail booms
  • DIY makers requiring stiff, lightweight tubing
  • Model boat and kite builders

Buying Tip

Measure the inner diameter of any socket or connector you plan to use to ensure the 8mm outer diameter fits, and remember these tubes are strong along their length but can crush under point loads.

Elecvora expert review

Our verdict

These pultruded carbon tubes offer an excellent strength-to-weight ratio for hobbyist and light structural use. They are well-made and consistent in dimensions, but users must account for their limited crush resistance.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High lengthwise stiffness and strength
  • Lightweight construction
  • UV and corrosion resistant
  • Non-conductive

Cons

  • Vulnerable to crushing or point loads
  • Not suitable for high-temperature applications above 130°C
  • Requires careful cutting and handling to avoid splinters

Best for

RC models, drones, and lightweight frames

Not ideal for

High-crush or high-temperature structural applications

Specifications

Production processPultruded
Different densities1.5g/cm3
Thickness (mm)1
Glass Transition Temperature130°C
Outer Diameter (mm)8
Shipping Weight0.166 kg
Shipping Dimensions103 × 2 × 1 cm

What's in the box

  • 2 x Pultruded Carbon Fibre Tube 8mm OD x 6mm ID x 1000mm

Frequently Asked Questions

Can these tubes be bent?
No, pultruded carbon fibre tubes are rigid and designed for straight structural use. Bending them may cause failure.
What is the maximum temperature these tubes can withstand?
The glass transition temperature of the resin is 130°C, so they should not be used in environments approaching or exceeding this temperature.
Are these tubes electrically conductive?
No, carbon fibre composites are electrically non-conductive, making them safe near electronics.
How many tubes are included?
The pack contains two tubes, each 1000mm long.
Can I glue these tubes?
Yes, epoxy or cyanoacrylate adhesives work well. Lightly sand the surface first for best adhesion.
What is the inner diameter?
The inner diameter is 6mm, allowing insertion of 6mm rods or components.

Overview

This pack contains two hollow carbon fibre tubes made by pultrusion, a process that pulls continuous unidirectional carbon fibres through resin and a former before curing. The result is a tube with exceptional strength and rigidity along its length, making it a dependable choice for lightweight structural work. Each tube has an 8mm outer diameter, a 6mm inner diameter and a 1000mm length, with a 1mm wall thickness. The 1.5g/cm3 density keeps weight low, while the 130°C glass transition temperature indicates the resin's thermal limit. These tubes are UV resistant, corrosion resistant, and electrically and thermally non-conductive.

Key Features

  • Pultruded construction: Unidirectional carbon fibre gives high tensile strength along the tube's axis.
  • Precise dimensions: 8mm OD, 6mm ID, 1mm wall, 1000mm length.
  • Lightweight: Density of 1.5g/cm3 helps keep overall build weight down.
  • Environmental resistance: UV resistant and corrosion resistant for outdoor or damp environments.
  • Non-conductive: Electrically and thermally non-conductive, useful near electronics.
  • Two-pack: Convenient quantity for projects requiring multiple tubes.

Specifications Explained

Outer diameter (8mm): Determines the tube's footprint and how it fits into booms, mounts or sockets. Inner diameter (6mm): Allows insertion of rods, wires or spars up to 6mm. Wall thickness (1mm): Balances strength and weight; thin walls keep the tube light but reduce crush resistance. Pultrusion: Ensures continuous fibre alignment for stiffness along the length. Density 1.5g/cm3: A typical value for carbon fibre composites, confirming lightweight characteristics. Glass transition temperature 130°C: The resin softens above this temperature, so avoid high-heat applications.

Compatibility and Requirements

These tubes are compatible with any project that accepts an 8mm outer diameter tube or a 6mm inner diameter insert. They can be bonded, clamped or pinned using standard methods for carbon fibre. No additional components are required for basic use, though appropriate cutting tools and safety equipment are recommended. The tubes are not designed for applications involving high crushing loads or temperatures above 130°C.

Typical Uses

Common applications include scale aircraft, gliders, helicopter tail booms, drone arms, and lightweight frames. They are also suitable for kites, model boats, and DIY structural projects where rigidity and low weight are important. The non-conductive nature makes them useful near electrical components.

What's in the Box

Two pultruded carbon fibre tubes, each 8mm OD x 6mm ID x 1000mm long.

Quick specs

Production process
Pultruded
Different densities
1.5g/cm3
Thickness (mm)
1
Glass Transition Temperature
130°C
Outer Diameter (mm)
8
Shipping Weight
0.166 kg
See all specifications