
1 / 3 · Click to enlarge
AI Summary
Two solid pultruded carbon fibre rods, each 2mm diameter and 1000mm long, offering high stiffness at just 2.5g per metre. Ideal for lightweight reinforcement in RC models, kites and small structures.
Key Highlights
- Solid pultruded carbon fibre construction with approx. 65% fibre volume
- High stiffness with Young's modulus of 230 GPa
- Very low coefficient of expansion for dimensional stability
- Ultra-light at only 2.5 grams per metre
- Each rod measures 2mm diameter by 1000mm length
- Pack of two rods ready for multiple projects
Ideal For
- RC model builders needing lightweight pushrods or spars
- Kite makers looking for stiff frame components
- Drone hobbyists reinforcing small frames
- DIY enthusiasts working on weight-sensitive projects
- STEM educators demonstrating composite materials
Buying Tip
Consider the 2mm diameter for light-duty applications; for higher loads, use multiple rods or choose a larger diameter.
Elecvora expert review
Our verdict
These pultruded carbon fibre rods offer an excellent stiffness-to-weight ratio for small-scale projects. The 2mm diameter is best suited to light structural roles where weight savings are critical.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High stiffness (230 GPa) for its weight
- Low thermal expansion for dimensional stability
- Consistent pultruded quality with high fibre volume
- Convenient two-pack for small builds
Cons
- Solid rod cannot be used as a tube
- Brittle under bending; not for high-impact loads
- Requires careful cutting to avoid splintering
Best for
Lightweight RC models, kites, and small structural reinforcements
Not ideal for
Heavy load-bearing or high-impact applications
Specifications
| Fiber Volume | Approx. 65% |
|---|---|
| Fiber Density | 1.4 - 1.8 g/cm3 |
| Glass Transition Temperature | 150°C~190°C |
| Expansion Coefficient | small |
| Weight per meter | 2.5g per meter |
| Resin glass transition (Tg) | 170º C |
| Youngs Modulus | 230 GPa |
| Dimensions (L x W x H) mm | 2mm * 1000mm |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 102 × 2 × 1 cm |
What's in the box
- 2 x Pultruded Carbon Fibre Rod (Solid) 2mm x 1000mm
Frequently Asked Questions
Can these rods be bent?
What is the difference between pultruded and other carbon fibre rods?
How should I cut these rods?
Are these rods electrically conductive?
What is included in the pack?
Can I glue these rods?
Overview
These solid carbon fibre rods are manufactured using the pultrusion process, where continuous carbon fibres are pulled through a resin bath and a forming die before curing. The result is a rod with fibres running longitudinally, providing high strength and stiffness along its length. With a 2mm diameter and 1000mm length, these rods are well suited to small-scale structural tasks where weight savings and rigidity are important. The pack contains two rods, giving you spare material or the ability to complete symmetrical builds.
Key Features
- Pultruded construction: Continuous fibres are aligned for maximum longitudinal strength.
- High fibre volume: Approximately 65% fibre content contributes to the rod's mechanical performance.
- Excellent stiffness: A Young's modulus of 230 GPa means the rod resists bending under load.
- Low thermal expansion: The expansion coefficient is small, helping maintain dimensions across temperature changes.
- Lightweight: At only 2.5 grams per metre, these rods add minimal mass to your project.
- Convenient pack size: Two 1000mm rods are included, ideal for small projects or repairs.
Specifications Explained
Fibre volume (approx. 65%): This indicates a high proportion of carbon fibre relative to resin, which generally translates to good strength and stiffness. Young's modulus (230 GPa): A measure of stiffness; higher values mean the rod flexes less under load. Weight per metre (2.5g): Useful for calculating the impact on overall weight in weight-sensitive designs. Glass transition temperature (150°C–190°C, resin Tg 170°C): The resin softens above this range, so avoid exposing the rods to excessive heat during forming or use. Expansion coefficient (small): The rods change length very little with temperature, which is beneficial for precision applications.
Compatibility and Requirements
These rods are solid and do not have an internal bore, so they are not intended for use as tubing. They can be bonded with suitable adhesives or used mechanically, but no specific adhesive or connector is included or endorsed. The rods are compatible with typical modelling materials such as balsa, foam, and lightweight composites, but always test fit and bonding methods on a sample first. No additional components are required for use, though cutting and finishing tools are recommended.
Typical Uses
These rods are commonly used in radio-controlled models as pushrods, spars, or reinforcement; in kites as frame elements; in drones for lightweight structural support; and in general hobby and DIY projects where a slim, rigid rod is needed. They are also suitable for small-scale engineering prototypes and educational projects.
What's in the Box
Two pultruded carbon fibre rods, each 2mm diameter and 1000mm long.
Quick specs
- Fiber Volume
- Approx. 65%
- Fiber Density
- 1.4 - 1.8 g/cm3
- Glass Transition Temperature
- 150°C~190°C
- Expansion Coefficient
- small
- Weight per meter
- 2.5g per meter
- Resin glass transition (Tg)
- 170º C











