
1 / 3 · Click to enlarge
AI Summary
This 2-pack of pultruded carbon fiber tubes measures 3mm OD x 1.5mm ID x 1000mm, offering high lengthwise strength and light weight. Ideal for RC aircraft, gliders, and lightweight structural projects.
Key Highlights
- Pultruded from 100% unidirectional carbon fiber for lengthwise strength
- Hollow core with 3mm outer diameter and 1.5mm inner diameter
- Each tube is 1000mm long; pack includes two tubes
- UV resistant and corrosion resistant for outdoor use
- Electrically and thermally non-conductive
- Glass transition temperature of 130°C and density of 1.5g/cm³
Ideal For
- RC modelers building scale aircraft and gliders
- Helicopter hobbyists needing lightweight pushrods
- Kite and model boat builders
- DIY enthusiasts working on small structural projects
- FPV pilots building lightweight frames
Buying Tip
Remember that pultruded tubes are strong along their length but weak against crushing, so avoid over-tightening clamps or using them where radial loads are high.
Elecvora expert review
Our verdict
These pultruded carbon fiber tubes offer a practical way to add stiff, lightweight reinforcement to small-scale models. They are well made for their intended hobby use, but users must respect their limitations regarding crushing and bending.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High lengthwise strength and rigidity
- Very lightweight due to hollow core and low density
- UV and corrosion resistant for outdoor applications
- Electrically and thermally non-conductive
Cons
- Vulnerable to crushing forces from clamps or impacts
- Not suitable for high-temperature environments above 130°C
- Small diameter limits load-bearing capacity
Best for
RC aircraft, gliders, and lightweight model structures
Not ideal for
Heavy-load structural applications or high-temperature environments
Specifications
| Production process | Pultruded |
|---|---|
| Different densities | 1.5g/cm3 |
| Thickness (mm) | 1 |
| Glass Transition Temperature | 130°C |
| Length (mm) | 1000 |
| Outer Diameter (mm) | 3 |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 103 × 2 × 1 cm |
What's in the box
- 2 x Pultruded Carbon Fiber Tube (Hollow) 3mm OD x 1.5mm ID x 1000mm
Frequently Asked Questions
What are the exact dimensions of each tube?
How many tubes are included?
Can these tubes be used outdoors?
Are these tubes electrically conductive?
What is the maximum temperature these tubes can withstand?
How should I cut these tubes?
Overview
This product consists of two hollow pultruded carbon fiber tubes, each with a 3mm outer diameter, a 1.5mm inner diameter, and a 1000mm length. The pultrusion process pulls continuous carbon fiber strands through resin and a former, then cures the resin in one continuous operation. This yields tubes with excellent strength along their axis, making them suitable for lightweight structures that need rigidity. The unidirectional fiber orientation provides high lengthwise strength but leaves the tubes vulnerable to crushing forces, so they should not be over-clamped or bent sharply.
Key Features
- Manufactured from 100% unidirectional carbon fiber via pultrusion
- Hollow design with 3mm OD and 1.5mm ID
- 1000mm length per tube; two tubes per pack
- UV resistant and corrosion resistant
- Electrically and thermally non-conductive
- Density of 1.5g/cm³ and glass transition temperature of 130°C
Specifications Explained
The 3mm outer diameter and 1.5mm inner diameter define a thin-walled tube with a 1mm wall thickness. This makes it very light and best suited to small-scale or lightly loaded applications. The 1000mm length gives you enough material to cut down for custom projects. Pultruded construction means the fibers run continuously along the tube, so it resists bending and stretching along its length. However, because the fibers are unidirectional, the tube has less resistance to crushing or radial forces. The 130°C glass transition temperature indicates the resin softens above this point, so keep the tube away from high-heat sources. The 1.5g/cm³ density confirms a lightweight profile compared to metals.
Compatibility and Requirements
These tubes are compatible with applications that accept a 3mm outer diameter and can accommodate a 1.5mm inner diameter. No additional components or special tools are required for basic use, though cutting and bonding may require standard modeling tools and adhesives. The tubes are not rated for structural loads beyond what is described here, so evaluate suitability for your specific project.
Typical Uses
Common uses include scale aircraft, gliders, helicopters, and other lightweight constructions where strength, rigidity, and low weight are important. The small diameter makes them suitable for pushrods, control linkages, and lightweight frame elements in small models. They can also be used in kite building, model boats, and other hobby projects that need thin, stiff tubes.
What's in the Box
Two pultruded carbon fiber tubes, each 3mm OD x 1.5mm ID x 1000mm.
Quick specs
- Production process
- Pultruded
- Different densities
- 1.5g/cm3
- Thickness (mm)
- 1
- Glass Transition Temperature
- 130°C
- Length (mm)
- 1000
- Outer Diameter (mm)
- 3











