
1 / 3 · Click to enlarge
AI Summary
A 1000mm hollow carbon fibre tube with 20mm outer and 18mm inner diameter, roll-wrapped in 3K prepreg with a glossy twill finish. Its 1mm wall gives a light, stiff alternative to metal tube for RC, drone and DIY structures.
Key Highlights
- Roll-wrapped 3K prepreg construction for lengthwise stiffness
- 20mm outer diameter with 18mm inner diameter hollow core
- 1mm wall thickness keeps weight low for its size
- Glossy 3K twill surface looks clean on exposed parts
- 1000mm length can be cut to project size
- Corrosion-resistant and UV-resistant for outdoor use
Ideal For
- RC aircraft builders making fuselages and booms
- Drone makers building frame arms and spacers
- Model and kite makers needing light structural tube
- DIY fabricators replacing aluminium or steel tube
- Robot and prop builders wanting a stiff, non-conductive member
Buying Tip
Confirm your clamps, inserts or mounts match the 20mm outer and 18mm inner diameter, and plan to seal any cut ends to protect the exposed fibres.
Elecvora expert review
Our verdict
A well-finished roll-wrapped tube that suits light structural work where lengthwise stiffness and low mass matter. It is not a substitute for metal in high-crush or high-point-load joints, so design your mounts accordingly.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Glossy 3K twill finish looks good on exposed parts
- Roll-wrapped layup gives strong lengthwise stiffness
- Light for its size at 1.5g/cm³ density
- Corrosion and UV resistant for outdoor builds
Cons
- Weak across the diameter, so avoid crushing clamps
- Cut ends need sealing to prevent fibre fraying
- Not electrically conductive, so it cannot be used as a ground path
Best for
RC, drone and DIY builders needing a light, stiff 20mm tube
Not ideal for
Applications with heavy side-wall crushing or point loads
Specifications
| Production process | Roll-Wrapped |
|---|---|
| Thickness (mm) | 1 |
| Material finish | 3K glossy twill surface |
| Different densities | 1.5g/cm^3 |
| Glass Transition Temperature | 130°C |
| Outer Diameter (mm) | 20 |
| Dimensions (L x W x H) mm | 20mm * 18mm * 1000mm |
| Shipping Weight | 0.349 kg |
| Shipping Dimensions | 102 × 3.3 × 1 cm |
What's in the box
- 1 x 3K Roll-wrapped Carbon Fibre Tube (Hollow) 20mm OD x 18mm ID x 1000mm L
Frequently Asked Questions
Can I cut this carbon fibre tube to length?
What is the difference between roll-wrapped and pultruded tube?
Is this tube electrically conductive?
What is included in the package?
How should I care for this tube?
Can I glue or bond this tube?
Overview
This is a hollow carbon fibre tube made by roll-wrapping 3K prepreg around a mandrel, then curing it to a glossy twill finish. It measures 20mm outside diameter, 18mm inside diameter and 1000mm in length, with a 1mm wall. The roll-wrapped process lays fibres along the tube's length, so the tube is stiff in the lateral axis and well suited to structural runs where bending strength matters. At a density of 1.5g/cm³, it is a lightweight alternative to aluminium or steel tube of similar size.
Key Features
- Roll-wrapped layup: unidirectional prepreg gives strong lengthwise stiffness.
- 3K glossy twill finish: a clean woven look for visible parts.
- Hollow core: 18mm inner diameter keeps mass down and allows shafts or inserts to pass through.
- 1mm wall: a balance of low weight and usable strength.
- UV and corrosion resistant: suitable for outdoor and damp environments.
- Electrically and thermally non-conductive: useful where metal tube would cause interference or heat transfer.
Specifications Explained
20mm OD and 18mm ID: the 1mm wall gives a slim, light tube; check that your fittings, inserts or clamps match these diameters before ordering.
1000mm length: long enough for full frame runs, and can be cut down with the right blade. Cutting exposes fibres, so seal the cut end if the part will be handled or exposed to moisture.
Roll-wrapped construction: fibres run mainly along the tube, so it resists bending well but is less strong across its diameter. Avoid crushing loads, over-tightened clamps or point pressure on the side wall.
Glass transition temperature of 130°C: the resin is stable for typical hobby and workshop conditions, but keep it away from direct flame and high-heat processes.
Compatibility and Requirements
No electrical rating or connector standard applies to this item; it is a structural tube. Match your clamps, inserts and mounts to the 20mm OD and 18mm ID. For bonded joints, use an adhesive suited to carbon fibre and the mating material. Cutting and drilling require a fine-tooth blade or abrasive bit, eye protection and dust control.
Typical Uses
Common applications include RC aircraft fuselages and booms, drone frame arms and spacers, model and kite structures, robot chassis members, and DIY fabrication where a light, stiff tube is needed. The glossy twill finish also suits decorative or exposed structural parts.
What's in the Box
1 x 3K Roll-wrapped Carbon Fibre Tube (Hollow) 20mm OD x 18mm ID x 1000mm L.
Quick specs
- Production process
- Roll-Wrapped
- Thickness (mm)
- 1
- Material finish
- 3K glossy twill surface
- Different densities
- 1.5g/cm^3
- Glass Transition Temperature
- 130°C
- Outer Diameter (mm)
- 20











