Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 40-tooth nylon spur gear with a 1.25 module and aluminium insert at the 6 mm bore, built for light, quiet power transmission. Its 52.17 mm outer diameter and 9.9 mm face width make it a practical drop-in for compact motor-driven assemblies.

Key Highlights

  • 1.25 module, 40 teeth for smooth, predictable gear ratios
  • Nylon body with aluminium insert for torque handling at low weight
  • 6 mm bore and 50 mm mounting hole PCD for easy fixing
  • 52.17 mm outer diameter, 9.9 mm face width
  • Weighs only 21 g to reduce moving mass
  • Quiet running and vibration absorption with no lubrication needed

Ideal For

  • Robotics builders needing a quiet 1.25 module gear
  • 3D printer and CNC enthusiasts replacing or designing gear trains
  • RC hobbyists working on small motor-driven mechanisms
  • Educators and students building geared models
  • Makers repairing equipment with a 40-tooth, 6 mm bore gear

Buying Tip

Confirm that your mating gear is also 1.25 module and that your shaft is 6 mm before ordering, as the 40-tooth count sets a fixed ratio.

Elecvora expert review

Our verdict

A well-balanced nylon spur gear that trades some ultimate strength for quiet running and low weight. It is a sensible choice for light-to-medium duty mechanisms where a 1.25 module, 40-tooth ratio fits.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight at 21 g
  • Quiet operation and vibration damping
  • Aluminium insert strengthens the bore
  • No lubrication required
  • Standard 1.25 module for easy pairing

Cons

  • Not suitable for high-torque or high-temperature applications
  • Nylon can wear faster than metal under heavy loads
  • No hub or set screw included

Best for

Light-duty robotics, 3D printers and educational models

Not ideal for

Heavy industrial drives or high-temperature environments

Specifications

Model No. / Name1.25M-40T-6-50
Gear StructureNylon Metal Insert Spur
Pitch (Module)1.25
No. of Teeth40
Face Width (FW) mm9.9
Total Width (W)9.9
Internal Diameter(ID)(mm)6
Outer Diameter (mm)52.17
Mounting Hole PCD (mm)50
Gear MaterialNylon and Aluminium
ColorWhite
Weight (g)21
Shipping Weight0.025 kg
Shipping Dimensions8 × 6 × 3 cm

What's in the box

  • 1 x 1.25M-40T-6-50 nylon spur gear with aluminium insert

Frequently Asked Questions

What does the module number mean?
The module (1.25) defines the tooth size. This gear will only mesh correctly with other 1.25 module gears.
Will this gear fit a 6 mm shaft?
Yes, the internal diameter is 6 mm, so it is designed for a 6 mm shaft.
Does it need lubrication?
No, the nylon body is designed to run without lubrication in typical applications.
What is included in the package?
One 1.25M-40T-6-50 nylon spur gear with aluminium insert. No other hardware is included.
Can I use this gear in a high-torque application?
The aluminium insert adds strength, but nylon gears are generally best for light-to-medium loads. For very high torque, consider metal gears.
How should I care for the gear?
Keep it clean and avoid exposing it to excessive heat or harsh chemicals. Check for wear periodically if used in a demanding mechanism.

Overview

The 1.25M-40T-6-50 is a spur gear made from white nylon with an aluminium insert at its centre. The nylon body keeps the gear light and quiet, while the aluminium insert reinforces the 6 mm bore so the gear can handle more torque than a plain plastic part. With 40 teeth and a 1.25 module, it meshes predictably with other 1.25 module gears, making it a useful building block for gear trains in robotics, small machines and DIY mechanisms.

Key Features

  • Hybrid construction: nylon gear body with an aluminium insert for added strength at the bore.
  • Standard 1.25 module: 40 teeth for straightforward ratio calculations.
  • Compact dimensions: 52.17 mm outer diameter and 9.9 mm face width.
  • Lightweight: just 21 g, helping reduce inertia in moving assemblies.
  • Low maintenance: nylon runs quietly, absorbs vibration and does not need lubrication.

Specifications Explained

Module 1.25 and 40 teeth: The module defines tooth size; a 1.25 module gear pairs only with other 1.25 module gears. With 40 teeth, the gear provides a specific ratio when meshed with a smaller or larger counterpart, so check your target ratio before ordering.

6 mm bore and 50 mm PCD: The internal diameter is 6 mm, matching common 6 mm shafts. The mounting hole pitch circle diameter of 50 mm indicates where fixing holes are positioned for bolting the gear to a hub or plate.

9.9 mm face width: The toothed section is 9.9 mm wide, and the total width is also 9.9 mm, so the gear is a simple flat disc profile that fits narrow spaces.

Nylon and aluminium: The nylon body dampens noise and vibration, while the aluminium insert strengthens the bore area where the shaft connects.

Compatibility and Requirements

This gear is intended for use with other 1.25 module spur gears and a 6 mm shaft. It is not a replacement for gears of other modules or bore sizes. No additional hardware is included; you will need your own shaft, fixing screws or adhesive as appropriate for your build. The gear is not supplied with a hub or set screw.

Typical Uses

Use this spur gear in robotics assemblies, small motor-driven mechanisms, 3D printer or CNC projects, educational models, remote-controlled vehicles and general mechanical repairs where a 1.25 module, 40-tooth gear is required. Its quiet operation makes it suitable for applications where noise is a concern, and its light weight helps in designs where reducing moving mass matters.

What's in the Box

One 1.25M-40T-6-50 nylon spur gear with aluminium insert.

Quick specs

Model No. / Name
1.25M-40T-6-50
Gear Structure
Nylon Metal Insert Spur
Pitch (Module)
1.25
No. of Teeth
40
Face Width (FW) mm
9.9
Total Width (W)
9.9
See all specifications