Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A slim 4x3 matrix membrane keypad with 12 soft-touch keys, a 90 mm attached cable and adhesive backing for flat panel mounting. It lets a microcontroller scan all twelve buttons using only seven signal lines.

Key Highlights

  • Twelve keys arranged in a 4x3 matrix layout
  • Compact 70 x 70 mm panel with 90 mm attached cable
  • Adhesive backing for quick flat surface mounting
  • Contact resistance of 500 ohm for reliable key reads
  • Rated for -40 to 90 degrees Celsius operation
  • Thin membrane construction with no moving key parts

Ideal For

  • Makers building microcontroller input panels
  • Instrument and equipment front panel designers
  • Students learning matrix keypad scanning
  • Prototype builders needing a flat control surface
  • Hobbyists adding menu buttons to enclosures

Buying Tip

Confirm your board can spare enough pins for a matrix scan and that you have a connector matching the 90 mm cable before ordering.

Elecvora expert review

Our verdict

A practical, low-cost membrane keypad for anyone who needs twelve buttons on a flat panel without complex wiring. The matrix layout and adhesive backing make it easy to integrate into microcontroller projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Twelve keys with only seven signal lines
  • Thin panel with adhesive backing for simple mounting
  • Attached 90 mm cable saves wiring work
  • Wide -40 to 90 degrees Celsius operating range

Cons

  • No connector or controller included
  • Requires a matrix scanning routine in your code
  • Membrane keys give limited tactile feedback

Best for

Microcontroller projects needing a compact flat keypad

Not ideal for

Users wanting individual mechanical switches with strong tactile clicks

Specifications

Item TypeKeypad Module
Model No. / NameSwitch Keypad
Operating Voltage (VDC)35
Operating Current (mA)100
Contact Resistance (ohm)500Ω
Insulation Resistance (MOhm)100
Dielectric Strength250VRms
Length (mm)70
Width (mm)70
Weight (g)7
Cable Length90mm
Operating Temperature (°C)-40 to 90
Shipping Weight0.01 kg
Shipping Dimensions9 × 8 × 4 cm

What's in the box

  • 1 x 4x3 Matrix 12-Key Membrane Switch Keypad

Frequently Asked Questions

How many pins does this keypad need?
The 4x3 matrix uses a scanned connection, so it needs seven signal lines for the rows and columns rather than one line per button.
Does it come with a controller or connector?
No. The module is supplied as the keypad with its attached 90 mm cable; a controller and matching connector are not included.
What voltage does it operate at?
The listed operating voltage is 35 VDC with an operating current of 100 mA, so it suits low-voltage control circuits.
How do I mount it?
The rear adhesive backing lets you peel and stick the keypad onto a clean, flat surface such as an enclosure or front panel.
Can it be used outdoors?
It is rated for -40 to 90 degrees Celsius, but the membrane construction means it is best suited to sheltered or indoor equipment.
How do I read which key is pressed?
Your microcontroller drives the matrix rows and reads the columns in sequence; the intersection that responds identifies the pressed key.

Overview

This membrane switch keypad offers twelve buttons in a 4x3 matrix on a thin 70 x 70 mm panel. Instead of wiring one line per button, the matrix arrangement lets a microcontroller scan rows and columns to identify which key is pressed, keeping the interface compact and the wiring simple. A 90 mm cable is attached, and the rear adhesive backing allows the keypad to sit flush on an enclosure or front plate.

Key Features

  • 4x3 matrix layout: twelve keys share a scanned connection scheme.
  • Slim panel: measures 70 mm by 70 mm and weighs about 7 g.
  • Attached cable: 90 mm ribbon lead ready for your circuit.
  • Adhesive mounting: peel-and-stick backing for flat surfaces.
  • Stable electrical figures: 500 ohm contact resistance and 100 megohm insulation resistance.
  • Wide temperature range: operates from -40 to 90 degrees Celsius.

Specifications Explained

The 35 VDC operating voltage and 100 mA operating current describe the module's electrical envelope, so it fits typical low-voltage microcontroller and control circuits. Contact resistance of 500 ohm indicates the resistance across a closed key contact, while 100 megohm insulation resistance reflects how well the circuit isolates when keys are open. Dielectric strength is rated at 250 VRms. The 90 mm cable gives enough length to reach a nearby header or breakout board, and the -40 to 90 degrees Celsius range covers most indoor and sheltered equipment environments.

Compatibility and Requirements

The keypad is designed for microcontroller projects that can scan a matrix. You will need a matching connector or header for the attached cable and enough free input pins to read the rows and columns. No controller, connector or mounting hardware is supplied with the module, so check your board's pin availability before planning the build.

Typical Uses

Common applications include instrument front panels, home and industrial electronic equipment, prototype control boxes, menu navigation on small devices and any project needing a flat numeric or function keypad.

Quick specs

Item Type
Keypad Module
Model No. / Name
Switch Keypad
Operating Voltage (VDC)
35
Operating Current (mA)
100
Contact Resistance (ohm)
500Ω
Insulation Resistance (MOhm)
100
See all specifications