
1 / 4 · Click to enlarge
AI Summary
A stackable Arduino Nano shield with 104 individually addressable RGB LEDs driven from a single GPIO pin. It turns Nano ESP32 and Nano R4 projects into colourful pixel displays while leaving the other headers free for sensors.
Key Highlights
- 104 individually addressable RGB LEDs on one compact Nano shield
- Single GPIO pin on D11 controls the whole matrix
- 24-bit colour with 256 brightness levels per channel
- Stackable design keeps D0 to D10, D12, D13 and analogue pins exposed
- Runs from 5V VBUS or an external 5V supply for brighter output
- Nano ESP32 adds 2.4GHz Wi-Fi, a web interface and REST API
Ideal For
- Makers building Arduino Nano ESP32 or Nano R4 projects
- STEM educators teaching embedded programming and addressable LEDs
- IoT developers who want a compact visual status display
- Prototypers adding pixel graphics without custom wiring
- Hobbyists creating decorative or interactive light installations
Buying Tip
Check that your Nano board is an ESP32 or R4 variant and plan a stable 5V supply, since a brighter 104-LED display draws more current than the Nano's USB port alone may comfortably deliver.
Elecvora expert review
Our verdict
A tidy, well-considered display shield that removes most of the wiring pain from addressable LED projects on Nano-format boards. It is at its best when you want a compact pixel display and still need access to the rest of the GPIO.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 104 addressable LEDs on a single compact shield
- One-pin control keeps the sketch and wiring simple
- Exposed headers preserve the rest of the Nano's pins
- Web interface and REST API on the Nano ESP32 version
Cons
- Bright full-matrix effects need a stable external 5V supply
- Compatibility is limited to Nano ESP32 and Nano R4 boards
- LED data pin is fixed to D11, so that pin is unavailable for other use
Best for
Makers and educators building compact Arduino Nano ESP32 or Nano R4 projects with a visual display
Not ideal for
Builders using non-Nano boards or those needing a large, high-resolution panel
Specifications
| Shipping Weight | 0.048 kg |
|---|---|
| Shipping Dimensions | 10 × 08 × 3 cm |
What's in the box
- 1 x 52Pi RGB LED Matrix Expansion Board for Arduino Nano ESP32
- 1 x Accessory set
- 1 x Manual
Frequently Asked Questions
Which Arduino boards does this shield work with?
How many pins do I need to control the LEDs?
How is the board powered?
Can I still connect sensors and other modules?
Does it support Wi-Fi control?
What is included with the shield?
Overview
The 52Pi RGB LED Matrix Expansion Board packs 104 individually addressable RGB LEDs onto a shield shaped for Arduino Nano ESP32 and Arduino Nano R4 boards. Instead of wiring a matrix by hand, you seat the shield on the Nano, connect power and start drawing pixels. The whole display is driven from a single GPIO pin on D11, which keeps the sketch simple and leaves the rest of the board free for other work.
This is a practical display layer for anyone who wants visible output from a small board: status panels, scrolling text, simple animations, icon indicators or decorative lighting. The shield follows the Nano footprint, so it stacks neatly and stays compact enough for enclosures and portable builds.
Key Features
- 104 addressable LEDs arranged as a dense matrix for icons, text and pixel graphics.
- Single-pin control on D11 using the WS2812 protocol at 800kHz.
- 24-bit RGB output with 256 brightness levels per colour channel.
- Stackable Nano shield that exposes D0 to D10, D12, D13, 3V3, A0 to A7, VBUS, GND and VIN.
- Flexible power from 5V VBUS or an external 5V supply.
- Wi-Fi and web control when used with the Arduino Nano ESP32, including a built-in web interface and REST API.
Specifications Explained
The 104 LEDs are individually addressable, meaning each pixel has its own colour value rather than sharing a single colour across the panel. That is what makes scrolling text, moving graphics and partial-colour effects possible. The 24-bit colour depth works out to roughly 16.7 million colours, and with 256 levels per channel you can dim the display smoothly instead of jumping between bright and off.
Control is handled over a single GPIO line at D11 using the WS2812 protocol, so the data connection is one wire and the rest of the headers remain usable. Power is the part worth planning: 5V arrives through VBUS or an external 5V input, and an external supply helps when you want a brighter display or many LEDs lit at once. The board measures 62 x 42 x 15 mm and weighs about 15 g, so it adds very little bulk to a Nano stack.
Compatibility and Requirements
The shield is built for Arduino Nano ESP32 and Arduino Nano R4 boards. It needs a 5V supply through VBUS or an external 5V source, and the LED data line is fixed to D11. Wi-Fi features, the web interface and the REST API apply to the Nano ESP32 version, which supports 2.4GHz Wi-Fi. No other boards or voltages are specified, so plan your build around these two Nano variants.
Typical Uses
- IoT status displays and notification panels
- STEM teaching and embedded programming practice
- Scrolling icons and pixel graphics in prototypes
- Decorative and interactive lighting installations
- Sensor dashboards where readings become colours or symbols
What's in the Box
- 1 x 52Pi RGB LED Matrix Expansion Board for Arduino Nano ESP32
- 1 x Accessory set
- 1 x Manual





















