Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 60-tooth nylon spur gear on a 1.25 module with a 6 mm bore and aluminium insert for added torque capacity. Its light, quiet-running body makes it a simple drop-in choice for compact drivetrains and repairs.

Key Highlights

  • 60 teeth on a 1.25 module pitch for defined speed ratios
  • Nylon body with aluminium insert strengthens the 6 mm bore
  • 77.42 mm outer diameter suits compact mechanisms
  • 10.04 mm face width and 20.33 mm total width
  • Quiet running with no lubrication required
  • Weighs just 56 g to keep assemblies light

Ideal For

  • Robotics hobbyists building small drivetrains
  • Makers designing custom mechanisms
  • Model engineers needing a defined gear ratio
  • Repairers replacing a worn 1.25 module gear
  • Workshop users building light, quiet assemblies

Buying Tip

Confirm your mating gear is also 1.25 module and that your shaft is 6 mm before ordering, since the bore and tooth pitch cannot be adjusted.

Elecvora expert review

Our verdict

A sensible mid-size nylon spur gear for builders who want a defined 1.25 module ratio without adding much weight. The aluminium insert is the standout detail, reinforcing the bore where plastic gears usually wear.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Aluminium insert strengthens the 6 mm bore
  • Light at 56 g
  • Quiet running and no lubrication needed
  • Clear, well-defined 1.25 module and 60-tooth count

Cons

  • Only meshes with same-module gears
  • Bore is fixed at 6 mm with no adjustment
  • Load capacity is not rated in the product data

Best for

Compact, quiet drivetrains and hobby mechanisms

Not ideal for

High-load industrial drives needing rated torque figures

Specifications

Model No. / Name1.25M-60T-6-75
Gear StructureNylon Metal Insert Spur
Pitch (Module)1.25
No. of Teeth60
Face Width (FW) mm10.04
Total Width (W)20.33
Internal Diameter(ID)(mm)6
Outer Diameter (mm)77.42
Mounting Hole PCD (mm)75
Gear MaterialNylon and Aluminium
ColorWhite
Weight (g)56
Shipping Weight0.059 kg
Shipping Dimensions8 × 8 × 2 cm

What's in the box

  • 1 x Nylon Metal Insert Spur Gear (1.25M-60T-6-75)

Frequently Asked Questions

What module is this gear?
It is a 1.25 module gear with 60 teeth. Any mating gear must use the same 1.25 module to mesh properly.
What shaft size does it fit?
The internal diameter is 6 mm, so it fits a 6 mm shaft. Check your shaft diameter before ordering.
Why does it have a metal insert?
The aluminium insert reinforces the bore area, helping the gear handle more torque than an all-plastic design of similar size.
Does it need lubrication?
Nylon gears are typically run without lubrication and are quieter than metal gears. Keep the teeth clean and free of grit.
What is included in the package?
One nylon metal insert spur gear, model 1.25M-60T-6-75.
What is the mounting hole PCD?
The mounting hole pitch circle diameter is 75 mm, useful if you plan to bolt the gear to a plate or pulley.

Overview

The 1.25M-60T-6-75 is a white spur gear built around a nylon body with an aluminium insert at the centre. With 60 teeth on a 1.25 module, it gives you a defined ratio when paired with any gear of the same module, and the 6 mm internal diameter fits a matching shaft. The metal insert adds strength where the load concentrates, so the gear can take more torque than a plain plastic part of the same size while staying light.

Key Features

  • Nylon and aluminium construction: a light body reinforced at the bore.
  • 60 teeth, 1.25 module: predictable ratios with same-module gears.
  • 6 mm bore: fits shafts of that diameter.
  • 77.42 mm outer diameter: compact enough for tight assemblies.
  • Quiet operation: nylon helps absorb vibration and needs no lubrication.
  • 56 g weight: keeps machine designs lighter.

Specifications Explained

Module 1.25 and 60 teeth define the tooth size and count. Two gears must share the same module to mesh correctly, so match this 1.25 module when choosing a partner gear.

Face width of 10.04 mm is the toothed contact width, while the 20.33 mm total width includes the hub area. Check both against your mounting space before fitting.

6 mm internal diameter is the bore that accepts the shaft. The 75 mm mounting hole PCD describes the bolt circle on the hub, useful if you plan to fasten the gear to a plate or pulley.

Outer diameter of 77.42 mm tells you the overall footprint, so you can confirm clearance inside your housing.

Compatibility and Requirements

This gear only meshes correctly with gears of the same 1.25 module. The shaft you mount it on must match the 6 mm bore, and any bolt fixing should follow the 75 mm mounting hole PCD. No other compatibility details are specified, so verify shaft fit and clearance before purchase.

Typical Uses

Suitable for hobby mechanisms, robotics assemblies, small machine builds, model engineering and repair work where rotation needs to be transferred, reversed or slowed. The nylon body suits applications where noise and weight matter.

What's in the Box

One nylon metal insert spur gear, model 1.25M-60T-6-75.

Quick specs

Model No. / Name
1.25M-60T-6-75
Gear Structure
Nylon Metal Insert Spur
Pitch (Module)
1.25
No. of Teeth
60
Face Width (FW) mm
10.04
Total Width (W)
20.33
See all specifications