
1 / 4 · Click to enlarge
AI Summary
The 624ZZ is a double-shielded radial ball bearing sized 4x13x5mm, supplied pre-lubricated for smooth rotation. This four-piece pack is ideal for 3D printers, robots, and compact mechanical projects.
Key Highlights
- Double metal shields on both sides help block dust and debris
- Pre-lubricated from the manufacturer for immediate use
- Compact 4mm inner diameter fits 4mm shafts
- 13mm outer diameter and 5mm thickness for tight spaces
- Four bearings per pack for multiple assemblies
- Approximately 1 gram per bearing for low mass
Ideal For
- 3D printer builders and maintainers
- Robotics hobbyists and students
- CNC and linear motion DIYers
- RC hobbyists needing small bearings
- Makers and repair enthusiasts
Buying Tip
Check that your shaft is exactly 4mm and your housing bore is 13mm before ordering, as these bearings have no adjustment range.
Elecvora expert review
Our verdict
These 624ZZ bearings offer a practical solution for compact rotary applications, with double shielding and pre-lubrication that simplify maintenance. The four-piece pack provides good value for common multi-bearing setups.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Double metal shields help extend service life in dusty environments
- Pre-lubricated and ready to install
- Compact and lightweight design
- Convenient four-piece quantity
Cons
- Unbranded, so long-term quality consistency may vary
- Not suitable for high-load or high-precision applications
- Shields are non-contact and may not fully seal against fine particles
Best for
3D printer and robot builders needing a standard 4x13x5mm bearing
Not ideal for
Applications requiring sealed or high-precision bearings
Specifications
| Model No. / Name | 624ZZ |
|---|---|
| Inner Diameter (mm) | 4 |
| Outer Diameter (mm) | 13 |
| Thickness (mm) | 5 |
| Weight (g) | 1 (approx) (each) |
| Dimensions (L x W x H) mm | 4 x 13 x 5 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 4 × 4 × 3 cm |
What's in the box
- 4 x 624ZZ radial ball bearings
Frequently Asked Questions
What are the exact dimensions of these bearings?
Are these bearings pre-lubricated?
What does ZZ mean in the model number?
How many bearings are included?
Can I use these in a 3D printer?
Do I need to lubricate these bearings?
Overview
The 624ZZ is a radial ball bearing designed for compact rotary applications. It measures 4mm inner diameter, 13mm outer diameter, and 5mm in thickness. Each bearing features two metal shields, one on each side, which help protect the internal rolling elements from dust and potential contamination. The bearings are pre-lubricated by the manufacturer, so no additional lubrication is needed before installation. This pack includes four bearings, making it convenient for projects that require multiple units or for keeping spares on hand.
Key Features
- Double shielded: Metal shields on both sides help keep contaminants out and lubrication in.
- Ready to install: Pre-lubricated for immediate use.
- Compact size: 4mm bore, 13mm outer diameter, and 5mm width suit small mechanisms.
- Lightweight: Approximately 1 gram per bearing adds minimal load.
- Four-piece pack: Provides multiple bearings for assemblies or replacements.
Specifications Explained
The 4mm inner diameter determines the shaft size the bearing fits. The 13mm outer diameter is the size of the bore it presses into. At 5mm thick, the bearing fits into narrow spaces. The ZZ designation indicates double metal shields, which are non-contact and help reduce contamination ingress while allowing higher speed operation than sealed variants. Each bearing weighs about 1 gram, so the set of four is very light. These dimensions are critical when matching bearings to existing hardware or designing new parts.
Compatibility and Requirements
These bearings fit any application that accepts a 4x13x5mm bearing. They are commonly used in 3D printers, robotics, and small CNC projects. No additional lubrication is required. Ensure your shaft and housing dimensions match the specified bore and outer diameter for proper fit.
Typical Uses
- 3D printer motion systems, such as idler pulleys or carriage wheels
- Small robot joints and drive mechanisms
- CNC builds and linear motion guides
- Hobby RC cars, boats, and aircraft
- DIY mechanical projects and repairs
What's in the Box
4 x 624ZZ radial ball bearings.
Quick specs
- Model No. / Name
- 624ZZ
- Inner Diameter (mm)
- 4
- Outer Diameter (mm)
- 13
- Thickness (mm)
- 5
- Weight (g)
- 1 (approx) (each)
- Dimensions (L x W x H) mm
- 4 x 13 x 5













