
1 / 3 · Click to enlarge
AI Summary
A four-piece pack of 685ZZ radial ball bearings, 5 mm inner, 11 mm outer and 5 mm thick, each with metal shields on both sides. They come pre-lubricated, so they drop straight into 3D printer, CNC and robot assemblies that use this size.
Key Highlights
- 5 mm inner diameter, 11 mm outer diameter, 5 mm thickness
- Double metal shields protect the rolling elements from dust
- Pre-lubricated from the manufacturer, no extra grease needed
- Approximately 1 g per bearing for lightweight assemblies
- Four bearings per pack for a build plus spares
- Suits 3D printers, CNC projects and small robots
Ideal For
- 3D printer builders working on RepRap-style machines
- Makers building small CNC and linear motion projects
- Robot hobbyists needing compact 5x11x5 mm bearings
- Workshops keeping a stock of small shielded bearings
- Students and learners assembling motion mechanisms
Buying Tip
Measure the bore, outer diameter and width of the bearing you are replacing and confirm they match 5 mm, 11 mm and 5 mm before ordering.
Elecvora expert review
Our verdict
A straightforward, well-chosen small bearing pack for anyone building compact motion hardware. The double shields and factory lubrication keep installation simple, and four pieces cover a build with spares.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Double metal shields on both sides
- Pre-lubricated and ready to install
- Light at about 1 g each
- Four bearings per pack
- Common 5x11x5 mm size
Cons
- Unbranded, so no manufacturer support channel
- Not sealed against liquid or heavy contamination
- Exact fit must be verified before ordering
Best for
Builders of 3D printers, CNC projects and small robots that use 5x11x5 mm bearings
Not ideal for
Applications exposed to liquids or heavy abrasive contamination, where sealed bearings are a better fit
Specifications
| Model No. / Name | 685ZZ |
|---|---|
| Inner Diameter (mm) | 5 |
| Outer Diameter (mm) | 11 |
| Thickness (mm) | 5 |
| Weight (g) | 1 (approx) (each) |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 4 × 4 × 2 cm |
What's in the box
- 4 x Radial Ball Bearing 685ZZ for 3D Printer / Robot
Frequently Asked Questions
What size shaft does the 685ZZ fit?
Do I need to add grease before installing?
What does the ZZ in the name mean?
How many bearings are included?
Can these be used in a 3D printer?
How should I care for these bearings?
Overview
The 685ZZ is a radial deep groove ball bearing built around a 5 mm bore, an 11 mm outer diameter and a 5 mm thickness. This pack contains four bearings, each fitted with a metal shield on both faces. The shields sit close to the inner ring and help keep dust and debris out of the raceway, which is useful in workshops and on moving machinery. Every bearing is lubricated at the factory, so it can be installed as supplied.
At roughly 1 g each, these bearings add very little mass to a carriage, arm or spindle assembly. The 5x11x5 mm size is a common footprint in compact motion systems, which makes the 685ZZ a sensible item to keep in a parts drawer.
Key Features
- Double shielded: one metal shield on each side of the bearing.
- Ready to fit: pre-lubricated by the manufacturer.
- Compact dimensions: 5 mm bore, 11 mm outer diameter, 5 mm width.
- Light weight: about 1 g per bearing.
- Four-piece pack: enough for a build with spares left over.
Specifications Explained
The 5 mm inner diameter defines the shaft size the bearing fits, so check that your axle, rod or bolt matches it. The 11 mm outer diameter is the size of the seat or housing the bearing presses into. The 5 mm thickness is the width of the bearing and affects how much space it takes up along the shaft. The ZZ suffix refers to the two metal shields. Because the shields are metal rather than rubber, they are a good match for applications where dust control matters but where low friction is also important.
Compatibility and Requirements
These bearings suit any assembly designed around a 5x11x5 mm bearing, including many RepRap-style 3D printers, CNC projects and small robots. Confirm the bore, outer diameter and width of your existing part before ordering, since a bearing that is even slightly off size will not seat correctly. No additional lubrication is required at installation.
Typical Uses
- 3D printer carriages, idlers and small motion joints
- CNC and linear motion projects
- Robot arms, wheels and pivots
- Hobby mechanisms and small rotating assemblies
What's in the Box
4 x Radial Ball Bearing 685ZZ for 3D Printer / Robot.
Quick specs
- Model No. / Name
- 685ZZ
- Inner Diameter (mm)
- 5
- Outer Diameter (mm)
- 11
- Thickness (mm)
- 5
- Weight (g)
- 1 (approx) (each)
- Shipping Weight
- 0.015 kg













