Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this temperature and humidity sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Temperature, Humidity, Pressure and Gas Sensor; model no. / name BME688; interface I2C and SPI. Check that your power source supplies 3.3V to 5V before connecting it.

Key Highlights

  • Item Type: Temperature, Humidity, Pressure and Gas Sensor
  • Model No. / Name: BME688
  • Interface: I2C and SPI

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeTemperature, Humidity, Pressure and Gas Sensor
Model No. / NameBME688
InterfaceI2C and SPI
Operating Voltage3.3V to 5V
Shipping Weight0.02 kg
Shipping Dimensions7 × 3 × 2 cm

Overview

The Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor, made by Adafruit, is listed in our temperature and humidity sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Temperature, Humidity, Pressure and Gas Sensor
  • Model No. / Name: BME688
  • Interface: I2C and SPI (confirm your cable or board uses the same connector)
  • Operating Voltage: 3.3V to 5V (match this to your power supply; too high a voltage can damage the part)
  • Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 7 × 3 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The BME688 from Bosch is an all-in-one environmental sensor that measures temperature, humidity, barometric pressure, and VOC gases. It communicates via SPI or I2C, making it versatile and easy to integrate. As a successor to the BME680, the BME688 adds a programmable gas-sensor heater for more advanced odor analysis, while maintaining the same hardware. This compact and affordable sensor is ideal for a variety of environmental monitoring applications.

Features:

  1. Measures temperature, humidity, pressure, and VOC gases.
  2. High precision: Humidity (±3%), pressure (±1 hPa), temperature (±1.0°C).
  3. Altimeter functionality with ±1 meter accuracy.
  4. Detects VOCs like ethanol and carbon monoxide.
  5. Programmable heater for advanced odor analysis.
  6. Supports I2C/SPI, compatible with 3.3V and 5V systems.
  7. Stemma QT connector for solder-free setup.

Specifications:
  1. Humidity Accuracy: ±3%
  2. Temperature Accuracy: ±1.0°C
  3. Barometric Pressure Accuracy: ±1 hPa
  4. Altitude Accuracy: ±1 meter or better
  5. VOC Sensor: Metal oxide (MOX) for detecting gases (alcohols, ethanol, carbon monoxide)
  6. Communication Interface: I2C and SPI
  7. Operating Voltage: 3.3V to 5V (on breakout board with regulator)
  8. Heater Programming: Programmable for controlled odor analysis
  9. Calibration Required: For precise measurements, especially VOC detection
  10. Connector Compatibility: Stemma QT (Qwiic-compatible)
  11. Dimensions: Standard 0.100” (2.54mm) pitch headers for breadboard use

Package Includes:

1 x Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor

Quick specs

Item Type
Temperature, Humidity, Pressure and Gas Sensor
Model No. / Name
BME688
Interface
I2C and SPI
Operating Voltage
3.3V to 5V
Shipping Weight
0.02 kg
Shipping Dimensions
7 × 3 × 2 cm
See all specifications