Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type MOX (Metal Oxide) Gas Sensor; model no. / name ENS161; operating voltage (v) 3.3V / 5V (Onboard regulated). Check that your power source supplies 3.3V / 5V (Onboard regulated) before connecting it.

Key Highlights

  • Item Type: MOX (Metal Oxide) Gas Sensor
  • Model No. / Name: ENS161
  • Operating Voltage (V): 3.3V / 5V (Onboard regulated)

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeMOX (Metal Oxide) Gas Sensor
Model No. / NameENS161
Operating Voltage (V)3.3V / 5V (Onboard regulated)
Current consumption12 mA (Standard Mode)
Operating Temperature (°C)-40 to +85
Standard EncapsulationLGA Package
Sensing technologyMetal Oxide (MOX)
Detection GasVOCs including ethanol, hydrogen, toluene
InterfaceI2C (STEMMA QT / Qwiic)
Supply Voltage3.3V / 5V compatible (onboard regulation)
OutputseCO2, eTVOC, AQI-U, AQI-S(Air Quality Outputs)
Operating humidity5% to 95% RH (non-condensing)
Length (mm)25.5
Width (mm)17.7
Weight (g)1.6
Shipping Weight0.008 kg
Shipping Dimensions10 × 8 × 2 cm

Overview

The Adafruit ENS161 MOX Gas Sensor - STEMMA QT / Qwiic, made by Adafruit, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: MOX (Metal Oxide) Gas Sensor
  • Model No. / Name: ENS161
  • Operating Voltage (V): 3.3V / 5V (Onboard regulated) (match this to your power supply; too high a voltage can damage the part)
  • Current consumption: 12 mA (Standard Mode) (your supply must deliver at least this much current)
  • Operating Temperature (°C): -40 to +85
  • Standard Encapsulation: LGA Package
  • Sensing technology: Metal Oxide (MOX)
  • Detection Gas: VOCs including ethanol, hydrogen, toluene

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Adafruit ENS161 MOX Gas Sensor – STEMMA QT / Qwiic is a compact, fully integrated digital air-quality sensor based on advanced MOX technology. Designed by ScioSense, it combines four metal-oxide sensing elements with an onboard controller to deliver reliable indoor air-quality insights. With built-in processing, it directly outputs eCO2, TVOC, and Air Quality Index values over I2C, eliminating the need for complex heater control or analog signal handling.

The STEMMA QT / Qwiic connectors make solder-free connections easy, while onboard voltage regulation and level shifting ensure compatibility with both 3.3V and 5V systems. Ideal for IoT, smart home, and educational projects, this sensor helps track air-quality trends accurately when properly calibrated.


Features:

  1. Fully integrated MOX gas sensor with onboard processing
  2. Outputs eCO2, eTVOC, AQI-U, and AQI-S values
  3. Four independent metal-oxide sensing elements
  4. I2C digital interface with STEMMA QT / Qwiic support
  5. Built-in heater control and signal algorithms
  6. Supports temperature and humidity compensation
  7. Compatible with 3.3V and 5V microcontrollers
  8. Compact breakout PCB with standard header pins

Package Includes:

1 x Adafruit ENS161 MOX Gas Sensor - STEMMA QT / Qwiic

1 x Header Pin

Quick specs

Item Type
MOX (Metal Oxide) Gas Sensor
Model No. / Name
ENS161
Operating Voltage (V)
3.3V / 5V (Onboard regulated)
Current consumption
12 mA (Standard Mode)
Operating Temperature (°C)
-40 to +85
Standard Encapsulation
LGA Package
See all specifications