Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this pir / ir and optical sensor is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name IR Remote Transceiver; current (a) 100mA-200mA per LED; sensor type Vertical IR sensor.

Key Highlights

  • Model No. / Name: IR Remote Transceiver
  • Current (A): 100mA-200mA per LED
  • Sensor Type: Vertical IR sensor

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameIR Remote Transceiver
Current (A)100mA-200mA per LED
Sensor TypeVertical IR sensor
Wavelength940nm
Cable Type2mm pitch, 4-pin STEMMA JST PH cable
IR10+ meters
Frequency (kHz)38Khz
Shipping Weight0.03 kg
Shipping Dimensions15 × 8 × 1 cm

Overview

The Adafruit Infrared IR Remote Transceiver - STEMMA JST PH 2mm - 940nm Emitter + 38KHz Receiver, made by Adafruit, is listed in our pir / ir and optical sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: IR Remote Transceiver
  • Current (A): 100mA-200mA per LED (your supply must deliver at least this much current)
  • Sensor Type: Vertical IR sensor
  • Wavelength: 940nm (measure your mounting space before ordering)
  • Cable Type: 2mm pitch, 4-pin STEMMA JST PH cable
  • IR: 10+ meters
  • Frequency (kHz): 38Khz (make sure the rest of your system works at this frequency)
  • Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

We've got a high-powered infrared emitter board, and a super-sensitive infrared remote receiver board - but why buy two boards when you can pick up one that does both? This board is the Adafruit Infrared Tranceiver breakout, which can transmit and receiver 940nm remote control data in one handy solder-free package. Please Note: to make this board easy to use, we have both solder-able breakout pads and also a JST PH 4-pin cable. We often use JST PH cables for I2C but this board does not use I2C - the white wire is data from a microcontroller to be emitted over the IR LED, the green wire is demodulated IR remote signal data to a microcontroller. The black wire is ground, red wire is 3V~5V power and logic level.

Features:

  1. Easy plug-and-play integration
  2. Solder-free connections
  3. Frequency: 38KHz
  4. Small and lightweight
  5. Receives and demodulates IR signals
  6. Suitable for remote control applications
  7. Compatible with standard IR protocols

Package Includes:

1 x Adafruit Infrared IR Remote Transceiver - STEMMA JST PH 2mm - 940nm Emitter + 38KHz Receiver

Quick specs

Model No. / Name
IR Remote Transceiver
Current (A)
100mA-200mA per LED
Sensor Type
Vertical IR sensor
Wavelength
940nm
Cable Type
2mm pitch, 4-pin STEMMA JST PH cable
IR
10+ meters
See all specifications