Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this boards compatible with arduino is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; board type ItsyBitsy; chip type RP2040.

Key Highlights

  • Item Type: Development Board
  • Board Type: ItsyBitsy
  • Chip Type: RP2040

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDevelopment Board
Board TypeItsyBitsy
Chip TypeRP2040
Clock Frequency125
Processor32-bit RP2040 Cortex M0+ dual core
Memory Capacity264KB RAM, 8MB SPI Flash
Shipping Weight0.006 kg
Shipping Dimensions10 × 7.5 × 1 cm

Overview

The Adafruit ItsyBitsy RP2040, made by Adafruit, is listed in our boards compatible with arduino range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Development Board
  • Board Type: ItsyBitsy
  • Chip Type: RP2040
  • Clock Frequency: 125 (make sure the rest of your system works at this frequency)
  • Processor: 32-bit RP2040 Cortex M0+ dual core (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Memory Capacity: 264KB RAM, 8MB SPI Flash (more memory leaves room for larger programs and buffers)
  • Shipping Weight: 0.006 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 7.5 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

A new chip means a new ItsyBitsy, and the Raspberry Pi RP2040 is no exception. When Adafruit saw this chip they thought "this chip is going to be awesome when we give it the ItsyBitsy teensy-weensy Treatment" and so they did! This Itsy' features the RP2040, and all niceties you know and love about the ItsyBitsy family Small, powerful, with a ultra fast dual Cortex M0+ processor running at 125 MHz - this microcontroller board is perfect when you want something very compact, with lots of horsepower and a bunch of pins. This Itsy has sports car speed, but SUV roominess with 8 MB of FLASH and 264KB of SRAM. ItsyBitsy RP2040 is only 1.4" long by 0.7" wide, but has 6 power pins, 23 digital GPIO pins (4 of which can be analog in and 16 x PWM out). It's the same chip as the Feather RP2040 and Raspberry Pi Pico but really really small. So it's great once you've finished up a prototype, and want to make the project much smaller. It even comes with 8 MB of SPI Flash built in, for data logging, file storage, or CircuitPython/MicroPython code Inside the RP2040 is a 'permanent ROM' USB UF2 bootloader. What that means is when you want to program new firmware, you can hold down the BOOTSEL button while plugging it into USB (or pulling down the RUN/Reset pin to ground) and it will appear as a USB disk drive you can drag the firmware onto. Folks who have been using Adafruit products will find this very familiar - they use the technique on all of their native-USB boards. Just note you don't double-click reset, instead hold down BOOTSEL during boot to enter the bootloader! This Itsy comes with loose 0.1" headers you can solder in for breadboard use!

 Features:

  • Dual ARM Cortex-M0+ @ 133MHz
  • 264kB on-chip SRAM in six independent banks
  • Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
  • DMA controller
  • Fully-connected AHB crossbar
  • Interpolator and integer divider peripherals
  • On-chip programmable LDO to generate core voltage
  • 2 on-chip PLLs to generate USB and core clocks
  • 30 GPIO pins, 4 of which can be used as analog inputs
  • Peripherals
    • 2 UARTs
    • 2 SPI controllers
    • 2 I2C controllers
    • 16 PWM channels
    • USB 1.1 controller and PHY, with host and device support
    • 8 PIO state machines

Package Includes:

1 x Adafruit ItsyBitsy RP2040

Quick specs

Item Type
Development Board
Board Type
ItsyBitsy
Chip Type
RP2040
Clock Frequency
125
Processor
32-bit RP2040 Cortex M0+ dual core
Memory Capacity
264KB RAM, 8MB SPI Flash
See all specifications